01482 222421
Coo-Var × Rock City Climbing Wall Paint: UK Innovative Ready-Made, Textured Paint for Hard-Wearing Grip
Key Highlights
- Designed by climbers and paint chemists—grip and durability proven on real walls
- Aggregated Grip - Fine aggregate delivers reliable friction without shredding shoes
- Ready Mixed - Stir and Apply, no messing
- Water-based - low VOC; paint one wall and keep the rest of the gym open
- Wide Colour Options - Eight vibrant stock colours plus tint-on-request for brand zoning
- Multiple Coats for Best Results - Three-coat system resists scuffing, chalk build-up, and constant shoe traffic
- Multi Surface Use - Compatible with multiple surfaces like Plywood and GRP
-
DIY Use- Safe for both professional and DIY use
Introduction
Searches like “best paint for climbing wall” or “how do I texture a bouldering wall” reveal endless DIY hacks—mixing sand into masonry paint, spraying epoxy, or importing pricey US products. None of these options arrive ready-mixed, low odour, and purpose-built for climbing gyms.
Coo-Var × Rock City Climbing Wall Paint changes that. Coo-Var brings 120 years of specialist-coating know-how; Rock City contributes three decades of climbing-wall design and an award-winning centre. The result is a one-tin, roll-and-go coating that refreshes tired panels or finishes new builds with professional grip and colour—no solvents, no smell, no drama.
Buy Coo-Var × Rock City Climbing Wall Paint now for next-day UK delivery
Common Problems Climbers & Wall Owners Face
- Slippery or glossy DIY paint that ruins smears and increases fall risk
- Peeling finishes that force expensive shutdowns and re-paints
- Over-textured sand mixes that chew rubber and skin
- Harsh solvent odours that close the whole facility for days
- Inconsistent colours that make route-setting and branding look messy
This paint addresses every one of those pain-points.
Why You Need This Paint
- Commercial-grade durability – three thin coats give a 40 µm dry film packed with aggregate, proven to withstand months of shoe and hold abuse.
- Climber-approved texture – friction tested on Rock City’s busiest walls; smooth enough for volumes, grippy enough for toe-hooks.
- Rapid turnaround – touch-dry in 90 minutes, recoatable in six hours, climb again next day.
- Low odour, low VOC – keep other walls open and customers happy while you paint.
- Multi-surface compatibility – bonds to plywood, GRP, concrete render, primed steel, and previously painted panels.
How It Works (Simplified)
- A high-solids acrylic binder carries a calibrated fine mineral aggregate.
- The pre-mixed texture rolls on evenly, so every square metre has uniform grip.
- Water evaporates quickly, leaving a flexible, breathable film that flexes with plywood panels.
- Built-in pigmentation resists UV fade under skylights and bright gym LEDs.
Product Details at a Glance
Water-based, fine-aggregated climbing-wall paint
Coverage – 8–10 m² per litre
Recoatable – ≈6 hours @ 20 °C
Touch-dry – ≈90 minutes
Colours – Blue, Red, Green, Black, Grey, Light Grey, White, Yellow (+ custom tints)
Finish – Matt, slip-resistant texture
Packs – 1 L & 5 L
Pro Application Tips
- All surfaces should be clean, dry, sound and free from contaminants.
- Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
- Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
- Mix well before use, we recommend using a metal paint mixer and drill.
- Do not paint when temperature will be at or below 7 °C during the painting and drying process, or moisture high.
- Roll the first “key” coat thinly to seal plywood grain.
- Apply two further coats waiting 6 hours between coats, cross-roll to spread aggregate uniformly.
- Maintain good airflow.
Upgrade your wall’s grip—add Coo-Var × Rock City Paint to your basket
Frequently Asked Questions
Will the texture damage climbing shoes?
No—the aggregate grade was chosen after year-long testing on rental shoes; it gives grip without excessive abrasion.
Can I spray the paint?
No—the built-in aggregate is designed for roller or brush.
Is it suitable for outdoor walls?
Absolutely— Coo-Var x Rock City Climbing Wall Paint is suitable for both Indoor and outdoor walls.
How much do I need for a climbing wall?
It depends on the size of your wall, expected spreading rate is 8-10 sq.m per litre. Measure your wall and adjust for the required three coats, roughly 3 sq.m per litre for the three coats. Our experts are here to help with you specification, contact us.
Do I need to mix sand in?
No, the aggregate is factory-blended for consistency—just stir well and apply.
Conclusion
Your climbers want trustworthy grip and vibrant walls; your business needs minimal downtime and long-lasting colour. Coo-Var × Rock City Climbing-Wall Paint delivers all three—engineered by climbers, manufactured by the UK’s specialist-coating experts.
Order today for next-day UK delivery, or speak to our technical team for surface-prep advice, colour-matching, and volume estimates.
Ready to paint? Order Coo-Var × Rock City today and climb tomorrow
Need Help? Contact Us
Our specialists can help you pick the ideal colour and guide you through the finishing process, ensuring your climbing wall remains inviting for years.
Contact Details
- Live Chat: On our site
- Phone: 01482 222421
- Email: info@specialistpaintsonline.co.uk
Business Hours
- Mon–Thu: 8:30 AM–5:00 PM
- Fri: 8:30 AM–3:45 PM