SPO Anti-Slip Aggregate - Paint Additive for High-Traction Slip-Resistant Floor Paint Finishes

• Add anti-slip grip to a floor painted with SPO Heavy Duty Two-Pack Floor Paint or Coo-Var Profloor Two-Pack Epoxy Floor Paint

• Create a high-traction slip-resistant surface on industrial, commercial, or domestic floors subjected to foot traffic, forklifts, pallet trucks, or vehicles

• Improve safety on ramps, walkways, loading bays, car parks, or any floor where slip risk is a concern

• Use a VOC-free, inert mineral additive with no solvents or hazardous substances

• Apply anti-slip aggregate using two methods — scatter onto wet paint or stir directly into the coating

• Use with floor paint systems other than SPO Heavy Duty Two-Pack Floor Paint or Coo-Var Profloor — not tested with other floor paint systems

• Apply to unpainted or uncoated floors — aggregate must be applied with or onto a compatible floor paint system

SPO Anti-Slip Aggregate Paint Additive transforms SPO Heavy Duty Two-Pack Floor Paint and Coo-Var Profloor into high-traction surfaces that stop slips before they hurt people or profits. Safer walkways mean fewer accidents, less downtime, and a reputation for caring that keeps staff productive and customers coming back. Built on Specialist Paints Online's decades of expertise, it's the fastest, lowest-cost way to upgrade floor safety.

Instant Grip Upgrade
Scatter into SPO Heavy Duty Floor Paint or Coo-Var Profloor and it cures into a robust, slip-resistant finish that cuts accident risk and insurance claims. Transform compatible floor coatings into professional anti-slip systems in minutes.

Heavy-Duty Durability
Large, hard-wearing mineral particles stand up to forklifts, pallet jacks, and family cars alike, saving you repeat repairs. This clean, inert additive outperforms flimsy "grit" alternatives that break down and disappear under traffic.

Cost-Saving Safety Solution
A single tub delivers comprehensive protection, slashing legal exposure and downtime far cheaper than rubber mats or specialist resins. Protect your floors, your people, and your budget simultaneously.

Designed for SPO & Profloor Systems
Specifically formulated to work seamlessly with SPO Heavy Duty Two-Pack Floor Paint and Coo-Var Profloor coatings, ensuring optimal performance, adhesion, and long-term durability in demanding environments.

SPO Anti-Slip Aggregate is the professional anti-slip solution for a wide range of industrial, commercial, and domestic floor environments:

• Warehouses & Distribution Centres – Ideal for adding anti-slip grip to warehouse floors subjected to forklift traffic, pallet trucks, and heavy foot traffic. Scatter onto wet SPO Two-Pack or Coo-Var Profloor immediately after application. Significantly reduces slip risk in busy warehouse environments.

• Ramps & Loading Bays – Great for improving grip on ramps, loading bays, and dock leveller surrounds where slip risk is highest. Apply at 100–150g per m² for maximum grip on inclined surfaces. Suitable for vehicle, forklift, and pallet truck traffic.

• Factory & Production Floors – Perfect for adding anti-slip protection to factory and production facility floors. VOC-free formula safe for use in food production and sensitive manufacturing environments. Compatible with SPO Heavy Duty Two-Pack and Coo-Var Profloor systems.

• Car Parks & External Yards – Suitable for adding anti-slip grip to car park floors and external concrete yards. Weather-resistant mineral aggregate maintains grip in wet outdoor conditions. Apply with Coo-Var Profloor for a durable exterior anti-slip finish.

• Garage & Workshop Floors – Ideal for homeowners and workshop operators wanting to add anti-slip grip to garage and workshop floors. One 880g tub covers most domestic garage floors. Apply with SPO Heavy Duty Two-Pack Floor Paint for a professional anti-slip garage floor finish.

• Walkways & Pedestrian Areas – A must-have for improving safety on walkways, pedestrian crossings, and high-footfall areas within industrial and commercial sites. Reduces slip risk and liability. Compatible with both SPO and Coo-Var Profloor floor paint systems.

If you need further advice on using SPO Anti-Slip Aggregate for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 35–50 m² per 880g tub (100–200g per m²)

Coverage varies depending on the desired level of slip resistance:
• Light grip (foot traffic only): 150–200g per m² — approx. 40–50 m² per 880g tub
• Heavy grip (forklifts, vehicles, ramps): 100–150g per m² — approx. 35–40 m² per 880g tub

Example Calculations:

Small Project (garage or workshop — approx. 20 m²):
• Product required: Approx. 200–400g
• Recommended: One 880g tub (covers with product to spare)

Medium Project (warehouse section or loading bay — approx. 40 m²):
• Product required: Approx. 400–800g
• Recommended: One 880g tub

Large Project (full warehouse or factory floor — approx. 80 m²):
• Product required: Approx. 800g–1.6 kg
• Recommended: One to two 880g tubs

For accurate project planning, calculate your floor area and select the appropriate application rate based on traffic type and desired grip level. Apply evenly for consistent slip resistance across the whole floor.

Important: Apply aggregate onto wet paint immediately after application — do not allow paint to begin curing before scattering aggregate. If stirring into paint, mix thoroughly before application.

Recommended System Products:
• SPO Heavy Duty Two-Pack Floor Paint – Apply aggregate onto wet paint or stir into coating
• Coo-Var Profloor Two-Pack Epoxy Floor Paint – Apply aggregate onto wet paint or stir into coating

Important Notes:

VOC-free inert mineral aggregate — no solvents or hazardous substances. No specialist PPE required beyond standard site PPE. Compatible with SPO Heavy Duty Two-Pack Floor Paint and Coo-Var Profloor Two-Pack Epoxy Floor Paint only.

Apply aggregate onto wet paint immediately — do not allow paint to begin curing before scattering aggregate.

Surface Preparation:

• Prepare and apply the compatible floor paint system (SPO Heavy Duty Two-Pack Floor Paint or Coo-Var Profloor) according to the paint manufacturer's instructions
• Ensure the floor surface is clean, dry, and properly prepared before applying the floor paint
• Apply the floor paint to the prepared surface

Method 1 — Scatter onto Wet Paint:

• Immediately after applying the floor paint, scatter SPO Anti-Slip Aggregate evenly across the wet paint surface
• Apply at 100–200g per m² depending on the desired level of grip
• Ensure even distribution across the entire surface — avoid clumping or uneven coverage
• Allow the paint to cure with the aggregate in place
• Once cured, brush or vacuum away any loose excess aggregate before applying a seal coat if required

Method 2 — Stir into Coating:

• Add SPO Anti-Slip Aggregate directly to the floor paint before application
• Stir thoroughly to distribute aggregate evenly throughout the paint
• Apply the paint and aggregate mixture to the floor surface using a brush or roller
• Stir periodically during application to prevent aggregate settling in the container
• Apply evenly for consistent slip resistance across the whole floor

Recommended System Products:
• SPO Heavy Duty Two-Pack Floor Paint – Apply aggregate onto wet paint or stir into coating
• Coo-Var Profloor Two-Pack Epoxy Floor Paint – Apply aggregate onto wet paint or stir into coating

• Application Method: Scatter onto wet paint (designed for SPO Heavy Duty Two-Pack Floor Paint or compatible epoxy floor paints)
• Coverage: ~35–50 m² per 880g
• Weight: 880 grams
• Material: Specially formulated anti-slip aggregate with large particle size
• Compatibility: Works optimally with SPO Heavy Duty Two-Pack Floor Paint or Coo-Var Profloor 2 Pack Epoxy Floor Paint for maximum adhesion and performance

Need detailed specs or prep guidance? Chat with our experts now!

What paints can I use this aggregate with?
SPO Anti-Slip Aggregate is specifically designed for use with SPO Heavy Duty Two-Pack Floor Paint and Coo-Var Profloor coatings. Using it with these compatible systems ensures optimal performance, adhesion, and long-term durability.

How do I apply the aggregate?
Simply scatter the aggregate onto freshly applied wet SPO or Profloor paint for maximum texture. Scatter volumes based on your desired texture level.

How much aggregate do I need?
Coverage depends on the desired slip resistance level. For scattering onto wet paint, approximately 100-200g per square metre provides good coverage.

Will this work on outdoor surfaces?
Absolutely. The hard-wearing mineral particles withstand rain, frost, UV exposure, and temperature variations. When used with SPO Heavy Duty Floor Paint or Coo-Var Profloor exterior systems, it creates durable outdoor slip resistance for ramps, steps, and walkways.

How quickly can I use the floor after application?
Drying time depends on whether you're using SPO Heavy Duty Floor Paint or Coo-Var Profloor. Follow the manufacturer's curing instructions for your chosen coating. Typically 24-48 hours for light use, longer for heavy traffic and full chemical resistance.

N/A

Compatible Floor Paint Systems:

• SPO Heavy Duty Two-Pack Floor Paint – Apply aggregate onto wet paint or stir into coating for a high-traction finish

• Coo-Var Profloor Two-Pack Epoxy Floor Paint – Apply aggregate onto wet paint or stir into coating for a high-traction finish

Need help specifying the right floor paint and anti-slip system for your project? Contact our experts via live chat!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.