Coo-Var Hammercote Metal Paint Smooth Finish - Fast-Drying Gloss Enamel for Metal | Heat Resistant to 150°C

• Protect metal from rust and corrosion with fast-drying gloss enamel (touch dry 30 minutes)

• Apply decorative smooth gloss finish to gates, railings, garden furniture, engines, and trailers

• Use heat-resistant metal paint (up to 150°C) for radiators, engines, and heat-exposed metalwork

• Apply fast-drying paint that recoats in as little as 15 minutes for rapid project completion

• Use solvent-based alkyd for direct-to-metal adhesion on prepared wrought iron, steel, and metal

• Choose from 8 colours (Black, White, Red, Yellow, Blue, Green, Silver, Gold) for decorative versatility

• Apply interior and exterior metal paint suitable for UK weather conditions

• Use professional-grade metal paint from Coo-Var (115+ years British coating expertise)

• Use on surfaces with active oil or grease contamination (clean with Coo-Var Degreaser first)

• Apply to surfaces with heavy rust (treat with Teamac Rust Converter first for optimal adhesion)

• Apply to surfaces where temperatures exceed 150 degrees.

• Apply to wet, damp, or saturated surfaces (surface must be dry before application)

• Achieve instant full hardness (full hardness requires 3–5 days—plan for curing time)

• Apply in temperatures below 5°C (minimum application temperature 5°C for proper cure)

• Use water-based paint (this is solvent-based—use SPO Thinners for cleanup, not water)

Coo-Var Hammercote Metal Paint Smooth Finish is a fast-drying solvent-based gloss enamel designed to protect metal from rust and corrosion whilst providing a smooth decorative finish that extends metal lifespan. Unlike standard metal paints that take hours to dry, this alkyd enamel is touch dry in just 30 minutes and recoatable in as little as 15 minutes, dramatically reducing project time and getting metal assets back in service faster.

Developed by Coo-Var with over 115 years of British coating expertise, Hammercote Smooth Finish is the professional solution for gates, railings, garden furniture, engines, trailers, radiators, and any metal surface requiring fast-drying rust protection with a decorative gloss finish. The solvent-based alkyd formulation provides direct-to-metal adhesion on prepared surfaces with heat resistance up to 150°C.

When metal surfaces are exposed to moisture, weather, and heat, rust and corrosion cause premature deterioration and costly replacement. Coo-Var Hammercote's gloss enamel formulation seals out moisture and corrosion whilst the fast-drying properties (touch dry 30 minutes) allow rapid recoating and fast project completion. The 150°C heat resistance makes it suitable for radiators, engines, and heat-exposed metalwork.

The solvent-based alkyd formulation provides superior adhesion and durability on prepared metal compared to water-based alternatives. The high-gloss smooth finish provides decorative appeal whilst protecting metal from rust and corrosion. Coverage of 10 m² per litre makes it cost-effective for large metal areas. Available in 8 standard colours for decorative versatility.

Suitable for interior and exterior prepared metal including wrought iron, steel, engines, trailers, and radiators. Treat stubborn rust with Teamac Rust Converter before painting. Clean metal with Coo-Var Degreaser to remove oil and grease. Thin with SPO Thinners for spray application.

Manufactured in the UK to rigorous standards and trusted by property owners, maintenance professionals, engineers, and DIY enthusiasts for fast-drying rust protection and decorative metal finishing.

Key Benefits:

• Fast-Drying Formula – Touch dry in just 30 minutes. Recoatable in as little as 15 minutes. Hard dry in 6 hours. Dramatically reduces project time and gets metal assets back in service faster. Ideal for time-sensitive maintenance and decorating projects.

• Rust & Corrosion Protection – Solvent-based gloss enamel seals out moisture and corrosion, extending metal lifespan. Protects gates, railings, garden furniture, engines, and trailers from rust. Reduces costly replacement and maintenance.

• Heat Resistant to 150°C – Gloss enamel withstands heat up to 150°C. Suitable for radiators, engines, and heat-exposed metalwork. Stays intact under indirect heat without cracking or peeling.

• Smooth Decorative Gloss Finish – High-gloss smooth enamel provides decorative appeal alongside rust protection. Lifts kerb appeal and brand image. Available in 8 colours for decorative versatility.

• Direct-to-Metal Adhesion – Solvent-based alkyd provides direct-to-metal adhesion on prepared surfaces. Superior adhesion compared to water-based alternatives. Suitable for wrought iron, steel, engines, trailers, and radiators.

• Interior & Exterior Use – Suitable for interior and exterior metal surfaces. Weather-resistant formulation withstands UK outdoor conditions. Versatile protection for all metal environments.

• 8 Colour Options – Available in 8 colours (Black, White, Red, Yellow, Blue, Green, Silver, Gold) for decorative versatility and colour coding.

• Coo-Var Heritage – Over 115 years of British coating expertise. Trusted by property owners, maintenance professionals, and engineers for fast-drying rust protection.

Protect and decorate metal with fast-drying gloss enamel. Add to basket now and extend metal lifespan.

Coo-Var Hammercote Metal Paint Smooth Finish is the perfect choice for fast-drying rust protection and decorative metal finishing in a variety of residential, commercial, and industrial applications:

• Gates & Railings – Ideal for metal gates and railings requiring rust protection and decorative gloss finish. Fast-drying formula (touch dry 30 minutes) allows rapid project completion. Weather-resistant for exterior use. Available in 8 colours.

• Garden Furniture & Tools – Great for metal garden furniture and tools requiring rust protection and decorative finish. Fast-drying formula means furniture back in use the same day. Smooth gloss finish lifts garden aesthetics. Interior and exterior use.

• Engines & Trailers – Perfect for engines and trailers requiring heat-resistant metal protection. Heat resistant to 150°C. Direct-to-metal adhesion on prepared steel and iron. Durable protection for automotive and industrial metalwork.

• Radiators & Pipework – Suitable for radiators and pipework requiring heat-resistant decorative finish. Heat resistant to 150°C. Smooth gloss finish provides decorative appeal. Fast-drying formula minimises downtime.

• Steel & Wrought Iron – A must-have for steel and wrought iron surfaces requiring rust protection and decorative gloss finish. Solvent-based alkyd provides superior adhesion. Smooth finish hides surface imperfections. Interior and exterior use.

• Property Maintenance – Ideal for property maintenance projects requiring fast-drying metal protection. Touch dry in 30 minutes, recoatable in 15 minutes. Reduces labour time and project duration. Professional gloss finish for kerb appeal.

If you need further advice on using Coo-Var Hammercote Metal Paint Smooth Finish for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 10 m² per litre @ 45 µm DFT

Per Tin Coverage (Single Coat):
• 500ml: Covers approx. 5 m²
• 1 litre: Covers approx. 10 m²
• 2.5 litres: Covers approx. 25 m²
• 5 litres: Covers approx. 50 m²

Recommended Application: 2 coats for optimal rust protection and gloss finish

Example Calculations:

Small Project (10 m² metal area):
• Total area: 10 m² × 2 coats = 20 m² coverage needed
• Paint required: Approx. 2 litres total
• Recommended: Two 1L tins (£48.32) OR One 2.5L tin (£51.73)

Medium Project (25 m² metal area):
• Total area: 25 m² × 2 coats = 50 m² coverage needed
• Paint required: Approx. 5 litres total
• Recommended: One 5L tin (£85.55)

Large Project (50 m² metal area):
• Total area: 50 m² × 2 coats = 100 m² coverage needed
• Paint required: Approx. 10 litres total
• Recommended: Two 5L tins (£171.10)

Coverage may vary depending on surface porosity and texture. Porous or rough surfaces may require more paint. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation.

Important: Apply 2 coats for optimal rust protection. Recoat after 15 minutes–4 hours. Full hardness 3–5 days.

Recommended System Products:
• Teamac Rust Converter for treating stubborn rust
• Coo-Var Degreaser for cleaning metal surfaces
• SPO Thinners for spray application
• Brushes and Trays for application

Surface Preparation:

All Metal Surfaces:
• Clean surface with Coo-Var Degreaser to remove oil, grease, dirt, and contamination
• Remove loose rust, loose paint, and damaged areas with wire brush or rust remover
• For stubborn rust, treat with Teamac Rust Converter and allow to cure completely
• Sand surface lightly to create a key and remove any existing loose finish
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Application:

• Stir paint thoroughly before use and occasionally during application
• Apply in temperatures above 5°C for optimal drying
• Ensure good ventilation during application and drying (solvent-based product)
• Use Brushes and Trays suitable for solvent-based paints

Brush Application:
• Use good-quality brush suitable for solvent-based paints
• Apply evenly, working paint well into the surface
• Avoid overly thick coats for even drying
• Coverage: Approx. 10 m² per litre per coat

Spray Application:
• Thin with up to 10% SPO Thinners (Thinners 15/16) for spray equipment
• Use 0.013″ airless spray equipment
• Apply in thin, even coats
• Ensure good ventilation and wear appropriate PPE

• Apply first coat evenly across entire metal surface
• Recoat after minimum 15 minutes (within 4 hours for best results)
• Apply second coat for optimal rust protection and gloss finish
• Allow final coat to cure for 3–5 days for full hardness
• Avoid application in damp, humid, or freezing conditions
• Clean tools immediately after use with SPO Thinners

Drying & Curing Times (at 20°C):

• Touch dry: 30 minutes
• Hard dry: 6 hours
• Recoat time: 15 minutes–4 hours
• Full hardness: 3–5 days

Drying times may be extended in cooler temperatures or high humidity.

Recommended System Products:
• Teamac Rust Converter – Treat stubborn rust
• Coo-Var Degreaser – Clean metal surfaces
• SPO Thinners – Thin for spray and clean tools
• Brushes and Trays – Application tools

What is Coo-Var Hammercote Metal Paint Smooth Finish and when should I use it?

Coo-Var Hammercote Smooth Finish is a fast-drying solvent-based gloss enamel for protecting and decorating metal surfaces. Use it when you need rust protection with a smooth decorative gloss finish on gates, railings, garden furniture, engines, trailers, radiators, and any prepared metal surface.

How fast does Hammercote dry?

Hammercote is touch dry in just 30 minutes and recoatable in as little as 15 minutes (within 4 hours for best results). Hard dry in 6 hours. Full hardness in 3–5 days. This fast-drying formula dramatically reduces project time compared to standard metal paints.

Is Hammercote heat resistant?

Yes, Hammercote Smooth Finish is heat resistant up to 150°C. This makes it suitable for radiators, engines, and heat-exposed metalwork. The gloss enamel stays intact under indirect heat without cracking or peeling.

Do I need to prime metal before applying Hammercote?

Hammercote provides direct-to-metal adhesion on prepared surfaces. For stubborn rust, treat with Teamac Rust Converter before painting. Clean metal with Coo-Var Degreaser to remove oil and grease. Ensure surface is clean, dry, and free from loose rust and paint.

Can I use Hammercote outdoors?

Yes, Hammercote is suitable for interior and exterior metal surfaces. The solvent-based alkyd formulation is weather-resistant and can withstand UK outdoor conditions. Ensure surface is dry before application.

How many coats of Hammercote do I need?

For optimal rust protection and gloss finish, apply 2 coats. Recoat after minimum 15 minutes (within 4 hours for best results). The two-coat system provides maximum rust protection and professional gloss finish.

Can I spray Hammercote?

Yes, Hammercote can be applied by brush or 0.013″ airless spray. Thin with up to 10% SPO Thinners (Thinners 15/16) for spray application. Ensure good ventilation and wear appropriate PPE.

What surfaces can I apply Hammercote to?

Hammercote is suitable for prepared metal including wrought iron, steel, engines, trailers, and radiators. Ensure all surfaces are clean, dry, and free from loose rust, paint, and contamination. Treat stubborn rust with Teamac Rust Converter first.

What colours are available for Hammercote?

Hammercote Smooth Finish is available in 8 colours: Black, White, Red, Yellow, Blue, Green, Silver, and Gold.

How much coverage can I expect from Hammercote?

Hammercote provides approximately 10 m² per litre per coat at 45 µm DFT. A 500ml tin covers 5 m², 1L covers 10 m², 2.5L covers 25 m², and 5L covers 50 m². Coverage may vary depending on surface porosity. We recommend ordering 10–15% extra for surface variation.

Is Hammercote water-based or solvent-based?

Hammercote is solvent-based (alkyd enamel). This provides superior adhesion and durability on metal compared to water-based alternatives. Clean tools with SPO Thinners, not water. Ensure good ventilation during application and drying.

What products do I need to complete my metal protection system?

We recommend using Teamac Rust Converter for treating stubborn rust, Coo-Var Degreaser for cleaning metal surfaces, SPO Thinners for spray application and tool cleaning, and Brushes and Trays for application. This complete system ensures maximum rust protection and durability.

Safety data sheet
Technical data sheet

Complete Your Metal Protection System:

• Teamac Rust Converter – Treat any stubborn rust before painting for optimal corrosion protection and long-term durability

• Coo-Var Degreaser – Clean metal surfaces to remove oil, grease, and contamination before application

• SPO Thinners – Thin prior to spray application

• Brushes and Trays – Professional application tools for smooth, efficient application

Need help choosing the right products? Contact our experts via live chat for personalised advice!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.