Teamac Chassis Paint | Fast-Drying Anti-Corrosive Metal Paint for Chassis, Structural Steel & Fabrications

• Apply a fast-drying anti-corrosive finish to bare steel chassis or structural steelwork
• Use a single product as both primer and finish to save time and materials
• Protect vehicle chassis, underbodies or metal fabrications from rust, moisture and salt
• Recoat quickly — wet-on-wet recoat in just 30 minutes
• Apply by airless spray for large areas or brush for small areas and touch-ups
• Achieve a durable semi-gloss black finish on metal components

• The surface has not been properly cleaned and degreased — oil, grease and contamination will cause adhesion failure
• The surface has heavy rust that has not been mechanically or chemically treated — blast cleaning to SA 2.5 is recommended for best results
• You require a colour other than black — Teamac Chassis Paint is available in black only
• You need a water-based or low-VOC product — this is a solvent-based product with a VOC content of 506 g/litre
• The application temperature is below the dew point — condensation on the surface will cause adhesion failure

Teamac Chassis Paint is a fast-drying, solvent-based anti-corrosive coating formulated to protect chassis, structural steel and metal fabrications from rust, moisture, salt and corrosion. Developed by Teamac — part of the Coo-Var group with over 115 years of British coatings heritage — it delivers a tough, durable semi-gloss black finish that can be used as both a primer and a topcoat in a single application.

The anti-corrosive formulation contains rust-inhibiting pigments that block moisture and salt penetration, protecting bare steel from the inside out. Touch dry in just 30 minutes at 20°C, it allows fast turnaround on workshop jobs and vehicle maintenance — a second coat can be applied wet-on-wet after just 30 minutes, or after 12 hours once the first coat has fully dried. Full hardness is achieved in 5–7 days.

Suitable for chassis, structural steelwork, metal fabrications, agricultural machinery, plant equipment and industrial metal components, Teamac Chassis Paint is the practical choice for workshops, fabricators and vehicle maintenance teams who need a reliable, cost-effective anti-corrosive finish. It can be applied by airless spray for large areas or by brush for small areas and touch-ups.

Key Benefits

• Anti-corrosive protection — rust-inhibiting formulation blocks moisture and salt, protecting bare steel from corrosion
• Primer and finish in one — apply as a single coat to prime and finish simultaneously, saving time and materials
• Fast drying — touch dry in 30 minutes, recoat in 30 minutes wet-on-wet or after 12 hours
• Durable semi-gloss finish — tough film resists stone chips, road grime and mechanical wear
• Versatile application — airless spray for large areas, brush for small areas and touch-ups
• Thinnable with Thinners 16 — up to 10% for spray application
• 115+ years of British expertise — trusted by workshops, fabricators and maintenance teams across the UK

Order before midday for next-day UK delivery.

Teamac Chassis Paint is an excellent choice for anti-corrosive protection across a wide range of metal surfaces and settings:

• Vehicle & Trailer Chassis — Apply to car, van, truck and trailer chassis for fast-drying, durable anti-corrosive protection. Touch dry in 30 minutes and recoatable wet-on-wet, minimising workshop downtime. Resists road salt, moisture and stone chips for long-term chassis protection.

• Structural Steel & Steelwork — Protect structural steelwork, beams, columns and frames in industrial, agricultural and commercial buildings. Can be used as a combined primer and finish in a single coat, reducing application time and materials on large steelwork projects.

• Metal Fabrications & Assemblies — Apply to fabricated steel components, brackets, frames and assemblies before installation. Fast drying allows fabrications to be handled and installed quickly after painting.

• Agricultural & Plant Machinery — Protect farm machinery, implements, plant equipment and groundcare machinery from rust, moisture and field contamination. Brush application is practical for on-site touch-ups and seasonal maintenance.

• Underbody & Underframe Protection — Apply to vehicle underbodies, subframes and undercarriage components for protection against road salt, water ingress and corrosion. Semi-gloss black finish gives a clean, professional appearance.

• Industrial Metal Components — Suitable for industrial metal components, pipework supports, steelwork and equipment frames in manufacturing, utilities and infrastructure environments where a durable, cost-effective anti-corrosive finish is required.

If you need personalised advice on surface preparation, application methods, or system products, contact our experts via the live chat for tailored guidance.

Coverage: 7–10 m² per litre dependent on application method and dry film thickness

Coverage by application method

• Airless spray at 40 micron DFT: approximately 10 m² per litre
• Airless spray at 60 micron DFT: approximately 7 m² per litre
• Brush application (small areas): approximately 7–10 m² per litre

Coverage per size

• 5L tin by airless spray (40 micron): approximately 50 m²
• 5L tin by airless spray (60 micron): approximately 35 m²
• 5L tin by brush: approximately 35–50 m²

Recommended coats

• 1 coat is standard when used as a combined primer and finish
• 2 coats recommended for maximum corrosion protection on bare steel or in harsh environments
• Recoat wet-on-wet after 30 minutes, or after a minimum of 12 hours once dry

Example calculations

• For a standard vehicle chassis (approximately 10–15 m² surface area), you will need approximately 1–2 x 5L tins for 2 coats
• For structural steelwork of 50 m², you will need approximately 1 x 5L tin per coat at 40 micron DFT

Practical coverage may be lower depending on surface profile, application method and material losses during spraying. For accurate project planning, we recommend ordering 10–15% extra.

Thin with Thinners 16 at a maximum of 10% for spray application.

Surface Preparation

• All surfaces must be clean, dry and free from grease, oil and contaminants before painting
• Remove any oil or grease with Coo-Var Universal Degreaser before mechanical cleaning or de-rusting
• Bare steel must be free from dust, rust and mill scale, use Teamac Rust converter on stubborn and hard to remove rust.
• Blast cleaning to SA 2.5 is recommended for best results — if blast cleaning is impractical, use mechanical cleaning (wire brushing, grinding or needle gunning); hand cleaning alone is not sufficient
• Where blast cleaning is carried out after assembly, pay special attention to edges, corners, nuts, bolts and welds
• Welds should be ground smooth and all weld spatter and slag removed before painting
• Ensure the surface temperature is above the dew point before applying — condensation on the surface will cause adhesion failure

Application

1. Stir the paint well before use and periodically during application
2. Thin with Thinners 16 at a maximum of 10% if required for spray application
3. Apply by airless spray (nozzle pressure 2000–2300 psi) for large areas, or by brush for small areas and touch-ups
4. Apply evenly, ensuring full coverage of edges, corners, welds and complex geometry
5. Allow to dry before handling — touch dry in 30 minutes at 20°C
6. Recoat wet-on-wet after 30 minutes, or after a minimum of 12 hours once the first coat has dried
7. Clean equipment immediately after use with Thinners 16

Drying Times (at 20°C)

• Touch dry: 30 minutes
• Hard dry: 4 hours
• Full hardness: 5–7 days
• Recoat interval: 30 minutes (wet-on-wet) or 12 hours minimum

Drying times will be longer in cold or humid conditions. Low temperature and high humidity will adversely affect application, drying and performance.

Important Notes

• Suitable for use as both a primer and a finish in a single coat
• Blast cleaning to SA 2.5 is recommended for bare steel — mechanical cleaning is the minimum acceptable standard
• Do not apply below the dew point — condensation will cause adhesion failure
• Full hardness is achieved in 5–7 days — avoid mechanical stress during this period
• Can be overcoated with Teamac Chassis Paint or any suitable topcoat after a minimum of 12 hours

Recommended System Products

Free delivery on orders over £75 — stock up on everything you need in one go and complete the job properly.

Coo-Var Universal Degreaser: Remove oil, grease and surface contamination from bare steel before mechanical cleaning or blast cleaning. Essential first step for proper adhesion and long-term corrosion protection.

Teamac Rust Converter: Apply to hard-to-remove rust on steel surfaces where blast cleaning is not practical. Converts rust to a stable compound before applying Teamac Chassis Paint.

Paint Brushes, Rollers & Frames: Use suitable brushes for small areas, touch-ups and complex geometry where spray application is not practical.

These products are commonly combined for best long-term results.

What surfaces can Teamac Chassis Paint be applied to?
It is suitable for bare steel, chassis, structural steelwork, metal fabrications, agricultural machinery, plant equipment and industrial metal components. The surface must be clean, dry and free from oil, grease, rust and mill scale before painting.

Can it be used as both a primer and a finish?
Yes. Teamac Chassis Paint can be applied as a combined primer and finish in a single coat, saving time and materials. It can also be overcoated with a suitable topcoat after a minimum of 12 hours.

What colours are available?
Teamac Chassis Paint is available in Black only, in a 5L tin.

What pack size is available?
Teamac Chassis Paint is available in a 5L tin.

How quickly does it dry?
Touch dry in 30 minutes at 20°C. Hard dry in 4 hours. Full hardness is achieved in 5–7 days. Drying times will be longer in cold or humid conditions.

How soon can I apply a second coat?
You can recoat wet-on-wet after just 30 minutes, or after a minimum of 12 hours once the first coat has fully dried.

How much does a 5L tin cover?
Coverage is approximately 10 m² per litre at 40 micron DFT by airless spray, or 7 m² per litre at 60 micron DFT. For brush application on small areas, expect approximately 7–10 m² per litre. A 5L tin will cover approximately 35–50 m² per coat depending on application method and surface profile.

Can I thin it?
Yes. Thin with Thinners 16 at a maximum of 10% for spray application. Clean equipment after use with Thinners 16.

How should I prepare the surface?
All surfaces must be clean, dry and free from oil, grease and contaminants. Blast cleaning to SA 2.5 is recommended for bare steel. If blast cleaning is not practical, use mechanical cleaning — hand cleaning alone is not sufficient. Remove oil and grease with Coo-Var Universal Degreaser before mechanical cleaning.

What should I do about surface rust?
Where rust cannot be fully removed by blast or mechanical cleaning, apply Teamac Rust Converter to convert the rust to a stable compound before applying Teamac Chassis Paint.

Is it flammable?
Yes. This product has a flash point of 25°C (closed cup) and a VOC content of 506 g/litre. Keep away from heat, sparks and naked flames during application and drying. Ensure adequate ventilation at all times. Refer to Safety Data Sheet SDS 20738 before use.

Can it be applied by spray?
Yes. Apply by airless spray at 2000–2300 psi nozzle pressure. Thin with Thinners 16 at a maximum of 10% for spray application. For small areas and touch-ups, apply by brush.

Do you offer next-day delivery?
Yes. Order before midday for next-day delivery to mainland UK addresses. Contact us for delivery options to Scottish Highlands, Northern Ireland and other remote areas.

Safety data sheet
Technical data sheet

We recommend these system products to achieve the best results with Teamac Chassis Paint. Free delivery on orders over £75
Coo-Var Universal Degreaser — remove oil, grease and surface contamination from bare steel before mechanical cleaning or blast cleaning; essential first step for proper adhesion

Teamac Rust Converter — apply to hard-to-remove rust where blast cleaning is not practical; converts rust to a stable compound before applying Chassis Paint

Paint Brushes, Rollers & Trays — suitable brushes for small areas, touch-ups and complex geometry where spray application is not practical

Not sure which preparation products or system is right for your job? Contact our experts via live chat for free, tailored advice — we will help you get the best result from your Teamac Chassis Paint.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.