Coo-Var Glocote Fluorescent Foundation | White Base Coat for High Visibility Fluorescent Paint

• Apply Coo-Var Glocote Fluorescent Paint to wood, masonry or metal and achieve maximum brightness and visibility
• Provide an essential white base coat that allows Glocote Fluorescent Paint to function correctly
• Seal a porous surface before applying Glocote Fluorescent Paint — additional coats may be required on highly porous surfaces
• Apply a high-density white base coat to maximise the brightness of fluorescent safety markings, hazard markings and high-visibility signage

• You are applying to metal without Teamac Zinc Phosphate Primer first — metal surfaces require the primer before the Foundation
• You are applying Glocote Fluorescent Paint without the Foundation — the Foundation is essential for the fluorescent paint to achieve its full brightness

Coo-Var Glocote Fluorescent Foundation is a specialist high-density white base coat formulated for use as the first step in the Coo-Var Glocote Fluorescent Paint system. Developed by Coo-Var — a British coatings manufacturer with over 115 years of heritage — it provides the essential white base that Coo-Var Glocote Fluorescent Paint requires to function correctly and achieve maximum brightness and visibility.

The high-density white formula maximises the reflectivity of the surface, allowing the fluorescent pigments in Glocote Fluorescent Paint to produce the brightest possible colour. Without the Foundation, the fluorescent topcoat will not achieve its full high-visibility performance. On porous surfaces, additional coats of Foundation may be required to achieve a fully opaque white base.

The Foundation is applied direct to wood and masonry. On metal surfaces, Teamac Zinc Phosphate Primer must be applied before the Foundation. The solvent-based formula cleans up with Thinners 14 and requires a recoat interval of 12 hours or overnight before applying Glocote Fluorescent Paint.

The complete Coo-Var Glocote Fluorescent Paint system: Teamac Zinc Phosphate Primer (metal only) → Coo-Var Glocote Fluorescent Foundation → Coo-Var Glocote Fluorescent Paint → Coo-Var Glocote Fluorescent Clear Protective Coat.

Key Benefits

• Essential for full fluorescent performance — provides the white base that Glocote Fluorescent Paint requires to achieve maximum brightness
• High-density white formula — maximises reflectivity for the brightest possible fluorescent colour
• Wide surface compatibility — apply direct to wood and masonry; use Teamac Zinc Phosphate Primer on metal
• Four sizes available — 500ml, 1L, 2.5L and 5L to suit projects of all sizes
• 115+ years of British expertise — trusted by safety professionals, contractors and facilities managers across the UK

Order before midday for next-day UK delivery.

Coo-Var Glocote Fluorescent Foundation is the essential first step for any application of Coo-Var Glocote Fluorescent Paint:

• Warehouse & Factory Safety Markings — Apply as the first step before Glocote Fluorescent Paint on floor markings, aisle markings, hazard zones and machinery edges. The high-density white base maximises the brightness of the fluorescent topcoat, ensuring markings are clearly visible in all lighting conditions.

• Construction Site Safety — Apply to timber and metal safety barriers, hoarding and site signage before Glocote Fluorescent Paint. The Foundation provides the white base that makes fluorescent safety colours as bright and visible as possible on site.

• Road & Traffic Management — Apply to road furniture, barriers, bollards and traffic management equipment before Glocote Fluorescent Paint. Use Teamac Zinc Phosphate Primer on metal surfaces before the Foundation.

• High Visibility Signage — Apply to signage boards, panels and display surfaces before Glocote Fluorescent Paint for maximum colour brightness and visibility. The Foundation ensures the fluorescent topcoat achieves its full high-visibility performance.

• Sports & Leisure Line Marking — Apply to sports court surfaces, pitch markings and leisure facility floors before Glocote Fluorescent Paint for bright, high-visibility line markings.

• Wood & Masonry Surfaces — Apply direct to sanded and prepared wood and masonry surfaces before Glocote Fluorescent Paint. On porous masonry, additional coats of Foundation may be required to achieve a fully opaque white base.

If you need personalised advice on the Glocote Fluorescent Paint system or coverage for your specific project, contact our experts via the live chat for tailored guidance.

Coverage: 13 m² per litre at 35 micron dry film thickness

Coverage per size

• 500ml: Covers approximately 6.5 m² per coat
• 1L: Covers approximately 13 m² per coat
• 2.5L: Covers approximately 32.5 m² per coat
• 5L: Covers approximately 65 m² per coat

Note: On porous surfaces, additional coats of Foundation may be required to achieve a fully opaque white base before applying Glocote Fluorescent Paint. Allow 12 hours or overnight between coats.

Recoat interval

• Between coats of Foundation: 12 hours or overnight
• Before applying Glocote Fluorescent Paint: 12 hours or overnight

Example calculations

• For a warehouse floor marking of 20 m² (1 coat): a 2.5L tin will cover with some remaining
• For a safety signage area of 5 m² (2 coats on porous masonry): a 1L tin will cover both coats
• For a large high-visibility project of 60 m² (1 coat): a 5L tin will cover with some remaining

For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and porosity.

The Complete Coo-Var Glocote Fluorescent Paint System

Step 1: Teamac Zinc Phosphate Primer — on metal surfaces only; apply before Foundation
Step 2: Coo-Var Glocote Fluorescent Foundation — essential white base coat on all surfaces; allow 12 hours or overnight before applying Glocote Fluorescent Paint
Step 3: Coo-Var Glocote Fluorescent Paint — the fluorescent topcoat
Step 4: Coo-Var Glocote Fluorescent Clear Protective Coat — recommended final coat for durability

Surface Preparation

Wood
• New wood should be sanded before coating to ensure an adequate key
• Existing painted surfaces should be cleaned, degreased and sanded
• Remove all loose and flaking material and treat bare areas as new substrate

Masonry
• All surfaces must be clean, dry and free from contaminants
• Porous masonry may require additional coats of Foundation before applying Glocote Fluorescent Paint

Metal
• Apply Teamac Zinc Phosphate Primer to metal surfaces before applying Foundation
• Do not apply Foundation direct to bare metal

Application

1. Mix well before use
2. Apply by brush, roller or airless spray to the prepared surface
3. Apply evenly, ensuring full, opaque white coverage
4. On porous surfaces, apply additional coats after 12 hours or overnight if the white base is not fully opaque
5. Allow 12 hours or overnight before applying Coo-Var Glocote Fluorescent Paint
6. If thinning is required, thin with Thinners 14 at a maximum of 10%
7. Clean brushes, rollers and trays immediately after use with Thinners 14

Airless Spray: Nozzle size 0.013", nozzle pressure 1800–2000 psi. Thin with Thinners 14 at maximum 10% if required.

Drying Times (at 20°C)

• Touch dry: 2 hours
• Hard dry: 12 hours
• Full hardness: 5–7 days
• Recoat interval: 12 hours or overnight

Drying times will be longer in cold or humid conditions.

Important Notes

• The Foundation is essential — Glocote Fluorescent Paint will not achieve its full brightness without it
• Allow 12 hours or overnight before applying the fluorescent topcoat — do not recoat too soon
• Do not apply direct to metal — use Teamac Zinc Phosphate Primer first
• Clean equipment with Thinners 14 immediately after use

Recommended System Products

Free delivery on orders over £75 — stock up on everything you need in one go and complete the job properly.

Teamac Zinc Phosphate Primer: Required on metal surfaces before applying Glocote Foundation. High-performance anti-corrosive primer for steel and iron.

Coo-Var Glocote Fluorescent Paint: The fluorescent topcoat — apply over Foundation after 12 hours or overnight. Essential next step in the Glocote system.

Coo-Var Glocote Fluorescent Clear Protective Coat: Recommended final coat applied over Glocote Fluorescent Paint for improved durability and surface protection.

Paint Brushes, Rollers & Paint Trays: Use a brush or roller for application. Clean with Thinners 14 immediately after use.

What is Coo-Var Glocote Fluorescent Foundation used for?
It is the essential first step in the Coo-Var Glocote Fluorescent Paint system. It provides the high-density white base coat that Glocote Fluorescent Paint requires to function correctly and achieve maximum brightness and visibility.

Do I need to use the Foundation before Glocote Fluorescent Paint?
Yes. The Foundation is essential — Glocote Fluorescent Paint will not achieve its full brightness without a white base coat. Do not apply Glocote Fluorescent Paint directly to a dark or unprepared surface.

What surfaces can it be applied to?
Wood and masonry — apply direct. On metal surfaces, Teamac Zinc Phosphate Primer must be applied before the Foundation.

What colour is it?
White — it dries to a matt, opaque white finish.

What sizes are available?
500ml, 1L, 2.5L and 5L.

How much does it cover?
Coverage is approximately 13 m² per litre at 35 micron dry film thickness — approximately 6.5 m² per 500ml, 13 m² per 1L, 32.5 m² per 2.5L and 65 m² per 5L per coat.

How long before I can apply Glocote Fluorescent Paint?
Allow 12 hours or overnight after applying the Foundation before applying Glocote Fluorescent Paint.

Is it water-based?
No. Glocote Foundation is solvent-based with a VOC content of 437 g/litre. Clean equipment with Thinners 14 immediately after use.

Can I thin it?
Yes. Thin with Thinners 14 at a maximum of 10%.

What do I clean my equipment with?
Clean brushes, rollers and trays immediately after use with Thinners 14.

What temperature do I need to apply it?
There are no specific temperature restrictions stated in the TDS, however low temperature and high humidity will adversely affect application, drying and performance. Apply in normal good painting conditions.

What is the complete Glocote Fluorescent Paint system?
Step 1: Teamac Zinc Phosphate Primer (metal surfaces only) → Step 2: Coo-Var Glocote Fluorescent Foundation → Step 3: Coo-Var Glocote Fluorescent Paint → Step 4: Coo-Var Glocote Fluorescent Clear Protective Coat (recommended).

Do you offer next-day delivery?
Yes. Order before midday for next-day delivery to mainland UK addresses. Contact us for delivery options to Scottish Highlands, Northern Ireland and other remote areas.

Safety data sheet
Technical data sheet

We recommend these system products to complete the Coo-Var Glocote Fluorescent Paint system. Free delivery on orders over £75

Teamac Zinc Phosphate Primer — required on metal surfaces before applying Glocote Foundation; high-performance anti-corrosive primer for steel and iron

Coo-Var Glocote Fluorescent Paint — the fluorescent topcoat; apply over Foundation after 12 hours or overnight; essential next step in the Glocote system

Coo-Var Glocote Fluorescent Clear Protective Coat — recommended final coat applied over Glocote Fluorescent Paint for improved durability and surface protection

Paint Brushes, Rollers & Paint Trays — use a brush or roller for application; clean with Thinners 14 immediately after use

Not sure how many coats you need or how the full system works? Contact our experts via live chat for free, tailored advice.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.