Coo-Var Glocote Fluorescent Paint | High Visibility Paint for Safety Markings & Hazard Identification

• Apply high-visibility fluorescent colour to skips, bollards, barriers, bicycles or marine equipment
• Mark hazards, bridges, structural steelwork or safety equipment with bright fluorescent colour
• Apply fluorescent paint for sign writing, stage, theatrical or artistic applications
• Choose from five fluorescent colours — Orange, Red, Yellow, Green and Pink
• Apply a solvent-based fluorescent paint that is highly visible in daylight and under artificial light

• Coo-Var Glocote Fluorescent Foundation has not been applied first — the Foundation is reccmended; without it the fluorescent paint will not achieve its full brightness
• You are applying to a large area or whole vehicle — fluorescent colours fade over time and will become patchy on large surfaces; this product is not recommended for whole lorries, buses or other large vehicles
• You require a permanent, non-fading colour — fluorescent pigments fade over time by nature of their fluorescent action
• You require a glow in the dark paint — for photoluminescent applications refer to Coo-Var Luminous Paint

Coo-Var Glocote Fluorescent Paint is a specialist solvent-based fluorescent paint formulated for high-visibility applications in daylight and under artificial light at night. Developed by Coo-Var — a British coatings manufacturer with over 115 years of heritage — it is ideal for skips, bollards, bicycles, fishing floats, ships, bridges and any object requiring hazard identification. It is also widely used by sign writers, stage crews and artists.

Glocote Fluorescent Foundation must be applied before Glocote Fluorescent Paint on all surfaces — without the white Foundation base coat, the fluorescent paint will not achieve its full brightness. A minimum of 2 coats of Glocote Fluorescent Paint are required. Coo-Var Glocote Fluorescent Clear Protective Coat is recommended as a final coat for improved durability.

Important: Fluorescent colours will fade over time by nature of their fluorescent action. This product is not recommended for large areas, whole lorries, buses or other vehicles, as the colour will become patchy over time.

The complete Coo-Var Glocote Fluorescent Paint system: Coo-Var Glocote Fluorescent Foundation → Coo-Var Glocote Fluorescent Paint (minimum 2 coats) → Coo-Var Glocote Fluorescent Clear Protective Coat.

Key Benefits

• Five fluorescent colours — Orange, Red, Yellow, Green and Pink to suit any safety or decorative application
• Four sizes available — 500ml, 1L, 2.5L and 5L to suit projects of all scales
• Highly visible in daylight and under artificial light — ideal for hazard identification and safety marking
• Wide application range — skips, bollards, bicycles, ships, bridges, signage, stage and artistic use
• Solvent-based formula — durable finish on a wide range of surfaces
• 115+ years of British expertise — trusted by safety professionals, contractors and artists across the UK

Order before midday for next-day UK delivery.

Coo-Var Glocote Fluorescent Paint is an excellent choice for high-visibility fluorescent applications across a wide range of uses:

• Skips & Waste Containers — Apply to skip bodies and waste containers for high-visibility roadside identification. Fluorescent Yellow and Orange are the most commonly used colours for skip marking. Apply over Glocote Foundation with a minimum of 2 coats for a durable, bright finish.

• Bollards & Barriers — Apply to plastic, metal and concrete bollards and barriers for high-visibility hazard identification. The fluorescent colours are clearly visible in daylight and under artificial light, improving safety in car parks, construction sites and pedestrian areas.

• Marine & Watercraft — Apply to fishing floats, buoys, marker equipment and small watercraft for high-visibility identification on the water. The bright fluorescent colours are clearly visible at distance on the water.

• Bridges & Structural Steelwork — Apply to bridge components, structural steelwork and infrastructure elements requiring high-visibility marking or hazard identification.

• Sign Writing & Display — Apply for sign writing, display boards and high-visibility signage. The five fluorescent colours provide excellent colour intensity for sign writing applications and the matt finish is suitable for most display uses.

• Stage, Theatrical & Artistic Use — Apply for stage set painting, theatrical props and artistic applications requiring vivid fluorescent colour. The colours are very effective under stage lighting and UV light.

If you need personalised advice on colour selection, coverage or the full Glocote system for your specific project, contact our experts via the live chat for tailored guidance.

Coverage: 13 m² per litre at 30 micron dry film thickness

Coverage per size (per coat)

• 500ml: Covers approximately 6.5 m² per coat
• 1L: Covers approximately 13 m² per coat
• 2.5L: Covers approximately 32.5 m² per coat
• 5L: Covers approximately 65 m² per coat

Important: A minimum of 2 coats of Glocote Fluorescent Paint are required. Allow 12 hours or overnight between coats.

Total coverage for 2 coats

• 500ml: Covers approximately 3.25 m² for 2 coats
• 1L: Covers approximately 6.5 m² for 2 coats
• 2.5L: Covers approximately 16.25 m² for 2 coats
• 5L: Covers approximately 32.5 m² for 2 coats

Note: Coo-Var Glocote Fluorescent Foundation must be applied before Glocote Fluorescent Paint. Purchase the Foundation separately.

Recoat interval: 12 hours or overnight between coats.

For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and porosity.

The Complete Coo-Var Glocote Fluorescent Paint System

Step 1: Coo-Var Glocote Fluorescent Foundation — essential white base coat on all surfaces; allow 12 hours or overnight before applying Glocote Fluorescent Paint
Step 2: Coo-Var Glocote Fluorescent Paint — minimum 2 coats; allow 12 hours or overnight between coats
Step 3: Coo-Var Glocote Fluorescent Clear Protective Coat — recommended final coat for durability

Surface Preparation

• All surfaces must be clean, dry and free from contaminants before applying
• Coo-Var Glocote Fluorescent Foundation must be applied and fully dry before applying Glocote Fluorescent Paint
• Do not apply Glocote Fluorescent Paint direct to any surface without the Foundation

Application

1. Mix well before use
2. Apply by brush or roller over the fully dried Glocote Foundation
3. Apply the first coat evenly and allow to dry — touch dry in 3 hours, recoat after 12 hours or overnight
4. Apply a second coat — a minimum of 2 coats are required
5. Allow 12 hours or overnight between further coats if additional coats are required
6. Once all coats of Glocote Fluorescent Paint are dry, apply Coo-Var Glocote Fluorescent Clear Protective Coat if required
7. Clean brushes, rollers and trays immediately after use with Thinners 14

Drying Times (at 20°C)

• Touch dry: 3 hours
• Hard dry: 12 hours
• Full hardness: 5–7 days
• Recoat interval: 12 hours or overnight

Drying times will be longer in cold or humid conditions.

Important Notes

• Glocote Fluorescent Foundation must be applied first — do not apply without it
• Minimum 2 coats are required — one coat will not provide adequate coverage or brightness
• Fluorescent colours fade over time — not recommended for large areas or whole vehicles
• Clean equipment with Thinners 14 immediately after use — do not allow to dry on equipment
• For glow in the dark applications, refer to Coo-Var Luminous Paint

Recommended System Products

Free delivery on orders over £75 — stock up on everything you need in one go and complete the job properly.

Coo-Var Glocote Fluorescent Foundation: Essential first step — must be applied before Glocote Fluorescent Paint on all surfaces. Provides the white base that allows the fluorescent paint to achieve its full brightness.

Coo-Var Glocote Fluorescent Clear Protective Coat: Recommended final coat applied over Glocote Fluorescent Paint for improved durability and surface protection.

Paint Brushes, Rollers & Paint Trays: Use a brush or roller for application. Clean with Thinners 14 immediately after use.

What is Coo-Var Glocote Fluorescent Paint used for?
It is used for high-visibility hazard identification, safety markings, sign writing, stage and theatrical applications, and decorative fluorescent use on skips, bollards, bicycles, ships, bridges and more.

Do I need to use Glocote Foundation first?
Yes. Coo-Var Glocote Fluorescent Foundation must be applied before Glocote Fluorescent Paint on all surfaces. Without the Foundation, the fluorescent paint will not achieve its full brightness.

How many coats do I need?
A minimum of 2 coats of Glocote Fluorescent Paint are required. Allow 12 hours or overnight between coats.

Will the colour fade?
Yes. Fluorescent colours fade over time by nature of their fluorescent action. This product is not recommended for large areas, whole lorries, buses or other large vehicles, as the colour will become patchy over time.

What colours are available?
Orange, Red, Yellow, Green and Pink.

What sizes are available?
500ml, 1L, 2.5L and 5L.

How much does it cover?
Coverage is approximately 13 m² per litre at 30 micron dry film thickness. A minimum of 2 coats are required.

How long between coats?
Allow 12 hours or overnight between coats.

Is it water-based?
No. Glocote Fluorescent Paint is solvent-based with a VOC content of 447.81 g/litre. Clean equipment with Thinners 14 immediately after use.

What do I clean my equipment with?
Clean brushes, rollers and trays immediately after use with Thinners 14.

Can I apply a protective coat over it?
Yes. Coo-Var Glocote Fluorescent Clear Protective Coat is recommended as a final coat for improved durability and surface protection.

Is it a glow in the dark paint?
No. Glocote Fluorescent Paint is a daylight fluorescent paint — it is highly visible in daylight and under artificial light but does not glow in the dark. For glow in the dark applications, refer to Coo-Var Luminous Paint.

What is the complete Glocote system?
Step 1: Coo-Var Glocote Fluorescent Foundation → Step 2: Coo-Var Glocote Fluorescent Paint (minimum 2 coats) → Step 3: Coo-Var Glocote Fluorescent Clear Protective Coat (recommended).

Do you offer next-day delivery?
Yes. Order before midday for next-day delivery to mainland UK addresses. Contact us for delivery options to Scottish Highlands, Northern Ireland and other remote areas.

Technical data sheet

Safety Data Sheet Red and Pink

Safety Data Sheet Orange, Green and Yellow

We recommend these system products to complete the Coo-Var Glocote Fluorescent Paint system. Free delivery on orders over £75

Coo-Var Glocote Fluorescent Foundation — essential first step; must be applied before Glocote Fluorescent Paint on all surfaces; provides the white base that allows the fluorescent paint to achieve its full brightness

Coo-Var Glocote Fluorescent Clear Protective Coat — recommended final coat applied over Glocote Fluorescent Paint for improved durability and surface protection

Paint Brushes, Rollers & Paint Trays — use a brush or roller for application; clean with Thinners 14 immediately after use

Not sure which colour or size you need? Contact our experts via live chat for free, tailored advice.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.