Coo-Var P101 PU Anti-Graffiti Coating - Ultimate Two-Pack Polyurethane Anti-Graffiti Protection for Professional Use

• Apply the ultimate professional anti-graffiti protection to surfaces that are repeatedly targeted by graffiti vandalism

• Use a permanent sacrificial-free anti-graffiti coating from which graffiti washes off easily with Coo-Var Graffiti Remover without reapplying the coating

• Apply a two-pack aliphatic polyurethane coating with superior UV resistance that maintains its protective properties in harsh outdoor environments

• Protect concrete, brick, stone, metal, bridges, statues, public toilets, and high-hygiene areas from graffiti vandalism

• Use a clear high-gloss coating that preserves the natural appearance of the substrate including heritage surfaces and decorative masonry

• Apply professional-grade anti-graffiti protection trusted by local authorities, facilities managers, and professional contractors

• Use without completing the mandatory Isocyanates online training course — this is a legal requirement for all users of this product

• Apply as a DIY product — P101 is a professional-use product only due to its Isocyanate content

• Apply in temperatures below 5°C (minimum application temperature 5°C)

• Apply in enclosed spaces without adequate ventilation (VOC max 498 g/L, flash point 40°C — professional ventilation required)

• Use beyond the 6–8 hour pot life (mix only what you can apply within the pot life)

• Recoat after 72 hours without abrading (maximum recoat window is 72 hours — abrade if exceeded)

• Expect instant full cure (full cure requires 5–7 days)

• Apply to unprepared or contaminated surfaces (surface must be clean, dry, and properly prepared)

Coo-Var P101 PU Anti-Graffiti Coating is the ultimate two-pack aliphatic polyurethane anti-graffiti coating designed to create a high-gloss, easy-clean protective film from which graffiti washes off easily with Coo-Var Graffiti Remover. Unlike single-pack anti-graffiti coatings that degrade under UV exposure and repeated cleaning, this two-pack polyurethane system chemically cures to create a durable, UV-resistant film that withstands repeated graffiti attacks and cleaning cycles without losing its protective properties.

⚠️ Professional use only: This product contains Isocyanates. Users must complete a mandatory online training course before use. This is a legal requirement — see the Technical Data Sheet for the course link and full details. Not suitable for DIY use.

Developed by Coo-Var with over 115 years of British coating expertise, P101 PU Anti-Graffiti Coating is the professional solution for protecting concrete, brick, stone, metal, bridges, statues, public toilets, and high-hygiene areas from graffiti vandalism. The aliphatic polyurethane formulation provides superior UV resistance compared to aromatic polyurethane alternatives, maintaining its high-gloss finish and anti-graffiti properties even in harsh outdoor environments.

When graffiti is applied to a P101-coated surface, the two-pack polyurethane film prevents spray paint and marker ink from bonding to the substrate. Graffiti can then be removed quickly and easily using Coo-Var Graffiti Remover without damaging the protective coating — leaving the surface fully protected and ready for the next attack. This sacrificial-free permanent protection system eliminates the need for costly repainting after each graffiti incident.

The two-pack system provides a pot life of 6–8 hours at 20°C — mix only what you can apply within this time. Coverage of 7–8 m² per litre (35–40 m² per 5 kg kit) at 65–75 µm DFT. Touch dry in 3–4 hours, hard dry in 16–24 hours, full cure in 5–7 days. Recoat minimum 16 hours, maximum 72 hours. Apply by brush, short-nap mohair roller, or airless spray — do not thin.

Suitable for concrete, brick, stone, metal, primed masonry, bridges, statues, public toilets, and high-hygiene areas. Clear finish preserves the natural appearance of the substrate. VOC max 498 g/L, flash point 40°C — use in well-ventilated area away from ignition sources.

Manufactured in the UK to rigorous standards and trusted by local authorities, facilities managers, property owners, and professional contractors for long-term protection against graffiti vandalism.

Key Benefits:

• Ultimate Graffiti Protection – Two-pack aliphatic polyurethane creates a high-gloss easy-clean film from which graffiti washes off easily with Coo-Var Graffiti Remover. Prevents spray paint and marker ink from bonding to the substrate. Eliminates costly repainting after each graffiti incident.

• Permanent Sacrificial-Free Protection – Unlike sacrificial anti-graffiti coatings that must be reapplied after each cleaning, P101 provides permanent protection that withstands repeated graffiti attacks and cleaning cycles. Long-term cost-effective solution.

• Superior UV Resistance – Aliphatic polyurethane formulation provides superior UV resistance compared to aromatic alternatives. Maintains high-gloss finish and anti-graffiti properties in harsh outdoor environments. No yellowing or degradation under UV exposure.

• Two-Pack Polyurethane Durability – Chemically cured two-pack system provides superior hardness and chemical resistance compared to single-pack alternatives. Withstands repeated cleaning with Coo-Var Graffiti Remover without losing protective properties.

• Multi-Surface Compatibility – Suitable for concrete, brick, stone, metal, primed masonry, bridges, statues, public toilets, and high-hygiene areas. One professional solution for all graffiti-targeted surfaces.

• Clear Finish – High-gloss clear finish preserves the natural appearance of the substrate. Suitable for heritage surfaces, statues, and decorative masonry where colour must be preserved.

• Professional-Grade Performance – Two-pack polyurethane system delivers professional-grade anti-graffiti protection trusted by local authorities, facilities managers, and professional contractors. Not available in single-pack alternatives.

• Coo-Var Heritage – Over 115 years of British coating expertise. Trusted by local authorities, facilities managers, and professional contractors for long-term protection against graffiti vandalism.

Protect surfaces permanently from graffiti. Add to basket now and eliminate costly repainting.

⚠️ Reminder: This product contains Isocyanates. Professional use only — mandatory online training course required before use.

Coo-Var P101 PU Anti-Graffiti Coating is the ultimate professional anti-graffiti solution for a wide range of surfaces and environments:

• Public Buildings & Infrastructure – Ideal for protecting council buildings, public toilets, bridges, underpasses, and public infrastructure from graffiti vandalism. Permanent sacrificial-free protection withstands repeated graffiti attacks and cleaning cycles. Trusted by local authorities and facilities managers.

• Schools & Educational Facilities – Great for protecting school perimeter walls, buildings, and surfaces from persistent graffiti vandalism. Graffiti removes easily with Coo-Var Graffiti Remover without repainting. Reduces maintenance costs and disruption. Professional application required.

• Retail & Commercial Properties – Perfect for protecting retail unit exteriors, commercial buildings, and metal shutters from graffiti. Clear high-gloss finish preserves the professional appearance of the property. Graffiti removed quickly without costly repainting.

• Heritage Surfaces & Statues – Suitable for protecting heritage masonry, statues, monuments, and decorative stonework from graffiti. Clear finish preserves the natural appearance of the substrate. Graffiti removes without damaging the underlying surface.

• Transport & Infrastructure – A must-have for protecting railway bridges, road infrastructure, transport hubs, and metal structures from graffiti vandalism. Two-pack aliphatic polyurethane withstands harsh outdoor environments and repeated cleaning cycles.

• High-Hygiene Areas – Ideal for protecting public toilets, washrooms, and high-hygiene areas from graffiti and marker pen vandalism. Easy-clean surface reduces maintenance time and costs. Suitable for ceramic, metal, and masonry surfaces.

If you need further advice on using Coo-Var P101 PU Anti-Graffiti Coating for your project, contact our experts now via the live chat for personalised guidance!

Coverage: 7–8 m² per litre @ 65–75 µm DFT

Per Kit Coverage:
• 1 kg mixed kit: Covers approx. 7–8 m² per coat
• 5 kg mixed kit: Covers approx. 35–40 m² per coat

Pot life: 6–8 hours @ 20°C — mix only what you can apply within the pot life.

Example Calculations (single coat):

Small Area (10 m²):
• Coverage needed: 10 m²
• Product required: Approx. 1.3–1.5 kg
• Recommended: Two 1 kg kits

Medium Area (25 m²):
• Coverage needed: 25 m²
• Product required: Approx. 3–4 kg
• Recommended: One 5 kg kit

Large Area (50 m²):
• Coverage needed: 50 m²
• Product required: Approx. 6–7 kg
• Recommended: One 5 kg kit + one 1 kg kit

Very Large Area (100 m²):
• Coverage needed: 100 m²
• Product required: Approx. 13–15 kg
• Recommended: Three 5 kg kits

For accurate project planning, we recommend ordering 10% extra to account for surface texture and porosity. Rough or porous surfaces may require more product.

Important: Touch dry 3–4 hours. Hard dry 16–24 hours. Recoat minimum 16 hours, maximum 72 hours. Full cure 5–7 days. Mix only what you can apply within the 6–8 hour pot life.

Recommended System Product:
• Coo-Var Graffiti Remover – Remove graffiti from P101-coated surfaces quickly and easily without damaging the protective coating

⚠️ Professional Use Only — Isocyanate Warning:

This product contains Isocyanates. Users must complete a mandatory online training course before use — this is a legal requirement. See the Technical Data Sheet for the course link. Wear full appropriate PPE including respiratory protection, chemical-resistant gloves, and eye protection. Use in well-ventilated area — VOC max 498 g/L, flash point 40°C. Keep away from ignition sources.

Surface Preparation:

All Surfaces:
• Clean surface thoroughly to remove dirt, dust, grease, oil, and contamination
• Remove all existing graffiti before applying — use Coo-Var Graffiti Remover if required
• Remove all loose paint, flaking material, and debris
• Repair cracks and damaged areas with suitable filler and allow to dry
• Ensure surface is completely dry before application
• Prime bare metal and porous masonry with appropriate primer before applying P101

Mixing:

IMPORTANT: Pot life is 6–8 hours at 20°C. Mix only what you can apply within the pot life. Pot life will be shorter at higher temperatures.

• Ensure both Part A (base) and Part B (hardener) are at room temperature before mixing
• Pour Part B (hardener) into Part A (base) following the correct ratio per the datasheet
• Stir thoroughly for minimum 3 minutes until completely combined
• Allow to stand briefly before application
• Do not mix more than you can apply within the 6–8 hour pot life

Application:

• Apply in temperatures above 5°C for optimal curing
• Ensure professional ventilation during application and drying
• Do not thin — apply at full consistency

Brush Application:
• Use good-quality brush suitable for solvent-based coatings
• Apply evenly, working coating well into the surface
• Avoid excessive pooling or overly thick coats
• Coverage: Approx. 7–8 m² per litre per coat

Mohair Roller Application:
• Use short-nap mohair roller suitable for solvent-based coatings
• Apply evenly with consistent pressure
• Coverage: Approx. 7–8 m² per litre per coat

Airless Spray Application:
• Use airless spray equipment suitable for high-viscosity solvent-based coatings
• Follow equipment manufacturer's instructions for setup and pressure
• Apply in even passes for consistent film thickness
• Coverage: Approx. 7–8 m² per litre per coat

• Apply first coat and allow to dry for minimum 16 hours (maximum 72 hours) before applying second coat
• If recoating after 72 hours, abrade surface before applying next coat
• Allow full cure of 5–7 days before exposing to graffiti risk or cleaning

Drying & Curing Times (at 20°C):

• Touch dry: 3–4 hours
• Hard dry: 16–24 hours
• Recoat time: Minimum 16 hours, maximum 72 hours
• Full cure: 5–7 days

Drying times may be extended in cooler temperatures or high humidity.

Graffiti Removal After Application:

• Once fully cured, graffiti can be removed using Coo-Var Graffiti Remover
• Apply Graffiti Remover to the affected area and remove graffiti without damaging the P101 protective coating
• The surface remains fully protected after cleaning and is ready for the next attack
• Do not use abrasive cleaners or tools that could damage the coating

Recommended System Product:
• Coo-Var Graffiti Remover – Remove graffiti from P101-coated surfaces quickly and easily

• Finish / Texture: High-gloss clear, smooth easy-clean film
• Base: Solvent-based two-pack aliphatic polyurethane
• Available Colours: Clear
• Pack Sizes: 1 L and 5 L mixed kits
• Coverage: 7–8 m² per litre @ 65–75 µm DFT (35–40 m² per 5 L)
• Drying Times @ 20 °C: Touch dry 3–4 h; hard dry 16–24 h; full cure 5–7 days
• Re-coat Interval: Minimum 16 h; maximum 72 h
• Minimum Application Temp.: 5 °C
• VOC Content: Max 498 g/L
• Flash Point: 40 °C (closed cup)
• Application Method: Brush, short-nap mohair roller or airless spray (no thinning)
• Surface Suitability: Concrete, brick, stone, metal, primed masonry, bridges, statues, toilets, high-hygiene areas
• Volume Solids: 47 %
• DFT/WFT: 65–75 µm DFT; 120–135 µm WFT
• Pot Life: 6–8 h @ 20 °C
• This product contains Isocyanates and is therefore a professional-use product. The appropriate health and safety precautions should be taken, users are required to do an online course. Below is a link to the website where these can be accessed: https://isopa-aisbl.idloom.events/?lang=en

Need detailed specs or prep guidance? Chat with our experts now and protect tomorrow!

What is Coo-Var P101 PU Anti-Graffiti Coating and when should I use it?

Coo-Var P101 PU Anti-Graffiti Coating is the ultimate two-pack aliphatic polyurethane anti-graffiti coating for professional use. Use it when you need permanent, sacrificial-free protection on surfaces that are repeatedly targeted by graffiti vandalism — concrete, brick, stone, metal, bridges, statues, and high-hygiene areas.

Why is P101 professional use only?

P101 contains Isocyanates, which are hazardous substances requiring specialist knowledge and PPE to handle safely. All users must complete a mandatory online Isocyanates training course before use — this is a legal requirement. See the Technical Data Sheet for the course link. P101 is not suitable for DIY use.

How does P101 protect against graffiti?

P101's two-pack aliphatic polyurethane film prevents spray paint and marker ink from bonding to the substrate. When graffiti is applied to a P101-coated surface, it sits on top of the protective film rather than penetrating the substrate. Graffiti can then be removed quickly and easily using Coo-Var Graffiti Remover without damaging the protective coating.

Is P101 a sacrificial or permanent anti-graffiti coating?

P101 is a permanent anti-graffiti coating — it does not need to be reapplied after each graffiti removal. Unlike sacrificial coatings that are removed along with the graffiti, P101 remains intact after cleaning with Coo-Var Graffiti Remover, providing ongoing protection against repeated graffiti attacks.

What surfaces can I apply P101 to?

P101 is suitable for concrete, brick, stone, metal, primed masonry, bridges, statues, public toilets, and high-hygiene areas. Ensure all surfaces are clean, dry, and properly prepared before application. Prime bare metal and porous masonry with appropriate primer before applying.

How do I mix P101?

Mix only what you can apply within the 6–8 hour pot life at 20°C. Pour Part B (hardener) into Part A (base) following the correct ratio per the datasheet. Stir thoroughly for minimum 3 minutes. Do not mix more than you can apply within the pot life. Pot life will be shorter at higher temperatures.

What is the pot life of P101?

The pot life of P101 is 6–8 hours at 20°C. Mix only what you can apply within this time. Pot life will be shorter at higher temperatures. Do not use mixed product beyond the pot life.

How long does P101 take to cure?

Touch dry in 3–4 hours, hard dry in 16–24 hours at 20°C. Recoat after minimum 16 hours (maximum 72 hours). Full cure in 5–7 days. Allow full cure before exposing to graffiti risk or cleaning.

How do I remove graffiti from a P101-coated surface?

Use Coo-Var Graffiti Remover to remove graffiti from P101-coated surfaces. Apply Graffiti Remover to the affected area and remove graffiti without damaging the P101 protective coating. The surface remains fully protected after cleaning and is ready for the next attack. Do not use abrasive cleaners or tools.

What coverage can I expect from P101?

P101 provides approximately 7–8 m² per litre at 65–75 µm DFT. A 1 kg kit covers approximately 7–8 m² and a 5 kg kit covers approximately 35–40 m² per coat. Order 10% extra to account for surface texture and porosity.

Is P101 UV resistant?

Yes, P101's aliphatic polyurethane formulation provides superior UV resistance compared to aromatic alternatives. It maintains its high-gloss finish and anti-graffiti properties even in harsh outdoor environments without yellowing or degradation.

What safety precautions are required when using P101?

P101 contains Isocyanates — complete the mandatory online training course before use (legal requirement). Wear full PPE including respiratory protection, chemical-resistant gloves, and eye protection. Use in well-ventilated area — VOC max 498 g/L, flash point 40°C. Keep away from ignition sources. Consult the Safety Data Sheet for full safety guidance.

Safety data sheet 1

Safety Data Sheet 2
Technical data sheet

Complete Your Anti-Graffiti System:

• Coo-Var Graffiti Remover – Remove graffiti from P101-coated surfaces quickly and easily without damaging the protective coating

Need help specifying the right anti-graffiti system for your project? Contact our experts via live chat!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.