Fluxaf Power Clean - Biodegradable Surface Cleaner & Degreaser for Pre-Paint Preparation & General Cleaning

• Clean and degrease surfaces before painting to ensure correct paint adhesion and performance

• Remove grease, oil, adhesive residue, glue, tape residue, or ingrained dirt from metal, plastic, tiles, timber, or masonry

• Use a zero VOC, non-flammable, low-odour cleaner safe for use in enclosed spaces including kitchens, bathrooms, and workshops

• Use a biodegradable, water-based degreaser with no harsh chemical fumes or specialist disposal requirements

• Apply a ready-to-use cleaner with no mixing or dilution required

• Clean vehicles, equipment, kitchen units, or workshop surfaces quickly and effectively

• Remove mould or mildew — use Fluxaf Mould & Mildew Remover for mould treatment before painting

• Apply in temperatures below 10°C (minimum application temperature 10°C)

Fluxaf Power Clean is a professional-grade, biodegradable, water-based surface cleaner and degreaser designed to rapidly remove grease, oil, adhesive residue, glue, and ingrained dirt from a wide range of interior and exterior surfaces — leaving them clean, residue-free, and ready for painting or further treatment.

The key advantage of Power Clean over solvent-based degreasers is its water-based, zero VOC, non-flammable formulation. No harsh chemical fumes, no flammable solvents, no specialist disposal requirements — safe for use in enclosed spaces including kitchens, bathrooms, workshops, and vehicle interiors. Biodegradable formula reduces environmental impact and disposal costs.

For painting projects, proper surface preparation is critical for paint adhesion and performance. Grease, oil, and contamination on the surface will prevent paint from bonding correctly, leading to adhesion failure, peeling, and premature paint breakdown. Fluxaf Power Clean removes all surface contamination quickly and effectively, leaving a clean, residue-free surface that paint can bond to correctly.

Ready to use straight from the 500ml trigger spray bottle — no dilution, no mixing. Spray onto the surface, allow to dwell briefly, then wipe clean or rinse with clean water. Fast-acting formula reduces scrubbing and preparation time. For stubborn staining, allow a longer dwell time or apply a second treatment.

Suitable for metal, plastic, tiles, painted walls, timber, masonry, kitchen units, and vehicles. Interior and exterior use. Minimum application temperature 10°C. 3-year shelf life.

Trusted by decorators, painters, maintenance teams, and facilities managers for fast, effective surface preparation and general cleaning.

Key Benefits:

• Removes Grease, Oil & Adhesive Residue – Fast-acting formula removes grease, oil, adhesive residue, glue, tape residue, and ingrained dirt in minutes. Reduces scrubbing and preparation time. Leaves surfaces clean and residue-free.

• Essential Pre-Paint Surface Preparation – Removes surface contamination that prevents paint from bonding correctly. Essential preparation before applying any paint or coating to metal, plastic, tiles, timber, or masonry. Clean surfaces mean better adhesion and longer-lasting paint finishes.

• Zero VOC — Biodegradable – Zero VOC, non-flammable, low-odour, water-based formula. No harsh chemical fumes — safe for use in enclosed spaces. Biodegradable formulation reduces environmental impact and disposal costs.

• Wide Surface Compatibility – Suitable for metal, plastic, tiles, painted walls, timber, masonry, kitchen units, and vehicles. One product for all pre-paint preparation and general cleaning needs.

• Ready to Use — No Dilution – Ready to use straight from the trigger spray bottle. No mixing, no dilution, no specialist equipment. Spray, dwell, wipe or rinse.

• Low Odour – Low-odour formula suitable for use in occupied spaces including kitchens, bathrooms, workshops, and offices. No solvent smell during or after application.

• 3-Year Shelf Life – 3-year shelf life when stored correctly. Cost-effective for occasional use — one bottle ready when you need it.

• Trusted by Professionals – Trusted by decorators, painters, maintenance teams, and facilities managers worldwide for fast, effective surface preparation and general cleaning.

Clean surfaces, better paint adhesion, longer-lasting finishes. Add to basket now.

Fluxaf Power Clean is the professional biodegradable cleaning and degreasing solution for a wide range of interior and exterior surfaces:

• Pre-Paint Surface Preparation – Essential preparation before applying any paint or coating to metal, plastic, tiles, timber, or masonry. Removes grease, oil, adhesive residue, and contamination that prevents paint from bonding correctly. Clean surfaces mean better adhesion and longer-lasting paint finishes.

• Kitchen & Commercial Catering Degreasing – Ideal for degreasing kitchen walls, tiles, extraction units, and catering equipment before repainting or maintenance. Zero VOC formula safe for use in food preparation environments. Removes baked-on grease and cooking residue quickly and effectively.

• Workshop & Industrial Degreasing – Great for degreasing workshop tools, equipment, metal surfaces, and machinery before painting or maintenance. Low-odour formula suitable for enclosed workshop spaces. Removes oil, grease, and industrial contamination without harsh chemical fumes.

• Adhesive & Tape Residue Removal – Perfect for removing adhesive residue, tape marks, sticker residue, and label adhesive from walls, metal, plastic, and tiles before repainting. Spray on, dwell briefly, wipe clean — no scrubbing required for most applications.

• Vehicle & Equipment Cleaning – Suitable for cleaning and degreasing vehicles, plant equipment, and machinery. Removes road grime, oil, and grease from painted and unpainted metal surfaces. Safe for use on vehicle paintwork — test on a small area first.

• General Maintenance Cleaning – A must-have for facilities managers, property managers, and maintenance teams for general surface cleaning and degreasing. One product for all interior and exterior cleaning needs. Biodegradable formula reduces environmental impact and disposal costs.

If you need further advice on using Fluxaf Power Clean for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Varies with stain severity and surface porosity

Coverage Guide (per 500ml trigger spray bottle):

• Light contamination (dust, light grease): Up to 15–20 m²
• Medium contamination (grease, oil, grime): 8–12 m²
• Heavy contamination (baked-on grease, adhesive residue): 4–6 m²

Example Calculations:

Pre-Paint Wall Preparation (light contamination — approx. 15 m²):
• Product required: One 500ml bottle

Workshop Degreasing (medium contamination — approx. 10 m²):
• Product required: One 500ml bottle

Kitchen Degreasing (heavy contamination — approx. 5 m²):
• Product required: One 500ml bottle

For large projects or heavily contaminated surfaces, order multiple bottles. Coverage will vary significantly depending on the type and severity of contamination.

Important: Apply at minimum 10°C. Spray on, allow to dwell briefly, wipe or rinse with clean water. For stubborn staining, allow a longer dwell time or apply a second treatment. Always allow surfaces to dry completely before applying any paint or coating.

Important Notes:

Water-based, zero VOC, non-flammable, and low odour. Safe for use in enclosed spaces. Wear appropriate PPE including gloves and eye protection during application. Test on a small inconspicuous area first to confirm surface compatibility.

Allow surfaces to dry completely before applying any paint or coating.

Surface Preparation:

• Remove loose dirt, dust, and debris from the surface before applying Power Clean
• Identify areas of heavy grease, oil, or adhesive contamination for targeted treatment

Application:

Step 1 — Spray:
• Apply in temperatures above 10°C
• Spray Fluxaf Power Clean directly onto the contaminated surface from the trigger spray bottle
• Ensure complete coverage of all contaminated areas
• Ready to use — no dilution or mixing required

Step 2 — Dwell:
• Allow Power Clean to dwell on the surface for a few seconds to a few minutes depending on the severity of contamination
• For light contamination: 10–30 seconds dwell time
• For heavy grease, oil, or adhesive residue: 1–3 minutes dwell time
• The formula will penetrate and break down contamination during the dwell time

Step 3 — Wipe or Rinse:
• Wipe clean with a cloth or sponge, or rinse with clean water
• For stubborn staining, scrub lightly with a brush or sponge before wiping or rinsing
• For heavily contaminated surfaces, a second application may be required
• Ensure all product residue is removed before painting

Step 4 — Dry & Paint:
• Allow the surface to dry completely before applying any paint or coating
• Ensure no moisture remains on the surface before painting
• Apply your chosen paint system once the surface is clean and dry

Storage:

• Store in a cool, dry place away from direct sunlight between 10–35°C
• Keep container tightly sealed when not in use
• 3-year shelf life when stored correctly

What is Fluxaf Power Clean and when should I use it?

Fluxaf Power Clean is a biodegradable, zero VOC, water-based surface cleaner and degreaser designed to remove grease, oil, adhesive residue, glue, and ingrained dirt from interior and exterior surfaces. Use it before painting to ensure correct paint adhesion, and for general cleaning and degreasing of metal, plastic, tiles, timber, masonry, kitchen units, and vehicles.

Why do I need to clean surfaces before painting?

Grease, oil, and contamination on the surface will prevent paint from bonding correctly, leading to adhesion failure, peeling, and premature paint breakdown. Fluxaf Power Clean removes all surface contamination quickly and effectively, leaving a clean, residue-free surface that paint can bond to correctly. Essential preparation before any painting project.

What surfaces can I use Power Clean on?

Power Clean is suitable for metal, plastic, tiles, painted walls, timber, masonry, kitchen units, and vehicles — interior and exterior. Test on a small inconspicuous area first to confirm surface compatibility.

How do I apply Power Clean?

Spray directly onto the contaminated surface from the trigger spray bottle. Allow to dwell for a few seconds to a few minutes depending on contamination severity. Wipe clean with a cloth or rinse with clean water. No dilution or mixing required — ready to use straight from the bottle.

Is Power Clean safe to use indoors?

Yes — Power Clean is zero VOC, non-flammable, and low odour. Safe for use in enclosed spaces including kitchens, bathrooms, workshops, and offices. No harsh chemical fumes.

Is Power Clean biodegradable?

Yes — Power Clean is a biodegradable, water-based formula with zero VOC. No specialist disposal requirements. Eco-friendly alternative to solvent-based degreasers.

Do I need to dilute Power Clean?

No — Power Clean is ready to use straight from the 500ml trigger spray bottle. No mixing or dilution required.

Will Power Clean damage my surfaces?

Power Clean is formulated to be safe on metal, plastic, tiles, painted walls, timber, and masonry when used as directed. Always test on a small inconspicuous area first if unsure about surface compatibility.

How long do I leave Power Clean on the surface?

For light contamination: 10–30 seconds. For heavy grease, oil, or adhesive residue: 1–3 minutes. For stubborn staining, allow a longer dwell time or apply a second treatment.

Can I use Power Clean to remove mould?

No — for mould and mildew removal, use Fluxaf Mould & Mildew Remover. Power Clean is designed for grease, oil, adhesive residue, and general contamination removal.

What is the shelf life of Power Clean?

Power Clean has a 3-year shelf life when stored correctly in a cool, dry place between 10–35°C.

What is the minimum application temperature?

The minimum application temperature is 10°C. Do not apply in temperatures below 10°C.

Safety data sheet
Technical data sheet

Complete Your Surface Preparation & Painting System:

• Fluxaf Mould & Mildew Remover – Remove mould and mildew before painting on affected surfaces

Need help choosing the right paint system for your project? Contact our experts via live chat!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.