Teamac Industrial Floor Paint - Cost-Effective Heavy Duty Floor Paint for Multiple Surfaces

• Protect workshop, garage, warehouse, or factory floors with cost-effective heavy duty single pack floor paint

• Apply to multiple surfaces including concrete, cement screed, wood, and primed metal floors

• Use straightforward single pack formulation without mixing or pot life concerns (DIY-friendly and professional-grade)

• Achieve heavy duty protection against heavy foot traffic, trolleys, light vehicles and moisture

• Create easy-clean semi-gloss finish that sheds dirt for reduced maintenance

• Use fast-drying floor paint (touch dry 2 hours, recoat 16 hours) for quick turnaround and minimal downtime

• Colour-code walkways or mark zones with 8 available colours (White, Black, Tile Red, Flint Grey, Light Grey, Forest Green, Yellow, Blue)

• Use cost-effective floor paint with excellent coverage (13–15 m² per litre) for large-area applications

• Use on floors with heavy vehicle traffic (forklifts, cars, trucks—consult our experts for heavy-duty two-pack epoxy coatings)

• Use in areas of high chemical exposure (acids, solvents, aggressive chemicals—consult our experts for chemical-resistant floor coatings)

• Use on floors with active oil or grease contamination (clean with Oil Remover or Universal Degreaser first before application)

• Apply to wet, damp, or saturated surfaces (surface must be dry before application)

• Use on smooth concrete without preparation (chemically abrade with Acid Etch or mechanically abrade for optimal adhesion)

• Apply to bare metal without priming (prime with Zinc Phosphate Primer first for optimal adhesion and corrosion protection)

• Achieve instant full hardness (full hardness requires 5–7 days—plan for curing time before heavy traffic)

Teamac Industrial Floor Paint is a cost-effective single pack heavy duty floor paint designed to protect workshop, garage, warehouse, and factory floors from heavy foot traffic, light vehicles, and moisture. Unlike standard floor paints that fail under industrial conditions, this tough solvent-based alkyd formulation provides durable semi-gloss protection on concrete, wood, and primed metal floors whilst remaining budget-friendly for large-area applications.

Developed by Teamac with over 100 years of British coating expertise, Industrial Floor Paint is the cost-effective solution for protecting and upgrading industrial, commercial, and domestic floors. The single pack formulation eliminates the complexity of two-pack systems, making it ideal for DIY users and professionals requiring straightforward application without mixing or pot life concerns.

When workshop, garage, and warehouse floors are exposed to heavy foot traffic, trolleys, light vehicles and moisture, unprotected concrete and wood quickly deteriorate, creating dust, stains, and maintenance headaches. Teamac Industrial Floor Paint's tough alkyd formulation seals and protects floors, reducing dust, and creating an easy-clean semi-gloss surface that withstands demanding industrial environments.

The semi-gloss finish provides excellent durability whilst remaining easy to clean, shedding dirt for reduced maintenance. The single pack formulation offers exceptional value for money, with coverage of 13–15 m² per litre making it cost-effective for large workshop, garage, and warehouse floor areas. Available in 8 colours for colour-coding walkways, marking zones, or matching corporate branding.

Suitable for masonry, concrete, cement screed, wood, and primed metal floors in workshops, garages, warehouses, factories, and industrial environments. Apply first coat thinned 10% with SPO Paint Thinners as primer on porous concrete, then apply second coat unthinned for complete protection. Full hardness in 5–7 days provides long-lasting performance.

Manufactured in the UK to rigorous standards and trusted by workshop owners, garage enthusiasts, warehouse managers, and industrial maintenance teams for cost-effective floor protection and easy application.

Key Benefits:

• Cost-Effective Single Pack – Single pack formulation eliminates complexity of two-pack systems. No mixing, no pot life concerns. Exceptional value for money with coverage of 13–15 m² per litre. Budget-friendly for large-area applications.

• Heavy Duty Protection – Tough solvent-based alkyd formulation protects floors from heavy foot traffic, trolleys, and light vehicles. Withstands moisture, and demanding industrial environments. Extends floor lifespan and reduces maintenance costs.

• Multiple Surface Compatibility – Suitable for masonry, concrete, cement screed, wood, and primed metal floors. Versatile solution for workshops, garages, warehouses, and factories. Single product for multiple floor types.

• Easy Application – Straightforward brush or roller application. First coat thinned 10% with SPO Paint Thinners acts as primer on porous concrete. Second coat un-thinned for complete protection. DIY-friendly and professional-grade.

• Semi-Gloss Easy-Clean Finish – Semi-gloss finish sheds dirt and for easy maintenance. Wipe or mop clean with minimal effort. Reduces cleaning time and keeps floors looking professional.

• Fast-Drying Quick Turnaround – Touch dry in 2 hours, hard dry in 12 hours, recoat after 16 hours. Quick return to service for minimal downtime. Full hardness in 5–7 days for long-lasting performance.

• 8 Colour Options – Available in White, Black, Tile Red, Flint Grey, Light Grey, Forest Green, Yellow, and Blue. Colour-code walkways, mark zones, or match corporate branding.

• Teamac Heritage – Over 100 years of British coating expertise. Trusted by workshop owners, garage enthusiasts, and industrial maintenance teams for reliable floor protection.

Protect floors with cost-effective heavy duty single pack floor paint. Add to basket now and extend floor lifespan.

Teamac Industrial Floor Paint is the perfect choice for protecting and upgrading floors in a variety of workshop, garage, warehouse, and industrial applications:

• Workshop & Garage Floors – Ideal for workshop and garage floors requiring cost-effective protection from heavy foot traffic, trolleys, and light vehicles. Single pack formulation is DIY-friendly for home workshops and garages. Semi-gloss finish sheds dirt for easy maintenance. Available in 8 colours for personalisation.

• Warehouse & Factory Floors – Great for warehouse and factory floors requiring budget-friendly protection for large areas. Excellent coverage (13–15 m² per litre) makes it cost-effective for extensive floor areas. Withstands heavy foot traffic and light industrial use. Fast-drying for minimal downtime.

• Industrial Floors & Walkways – Perfect for industrial floors, walkways, and platforms requiring durable protection. Suitable for concrete, cement screed, and wood floors. Colour-code walkways with 8 available colours for safety and organisation. Professional semi-gloss finish.

• Concrete & Cement Screed Floors – Suitable for concrete and cement screed floors in workshops, garages, warehouses, and factories. Seals porous concrete, prevents dust, and creates easy-clean surface. First coat thinned 10% acts as primer for optimal adhesion.

• Wood Floors & Platforms – A must-have for wood floors and platforms in workshops, warehouses, and industrial environments. Protects wood from moisture, and wear. Extends floor lifespan and reduces maintenance costs. Durable semi-gloss finish.

• Primed Metal Floors – Ideal for primed metal floors and platforms requiring corrosion protection and durable finish. Prime bare metal with Zinc Phosphate Primer first. Semi-gloss finish provides professional appearance and easy maintenance.

If you need further advice on using Teamac Industrial Floor Paint for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 13–15 m² per litre per coat

Per Tin Coverage (Single Coat):
• 5 litres: Covers approx. 65–75 m²
• 20 litres: Covers approx. 260–300 m²

Recommended Application: 2 coats (first coat thinned 10% as primer on porous concrete, second coat unthinned)

Example Calculations:

Small Workshop or Garage (30 m² floor area):
• Total area: 30 m² × 2 coats = 60 m² coverage needed
• Paint required: Approx. 4.3 litres total
• Recommended: One 5L tin (£49.25) will cover with material left over

Medium Warehouse or Factory (100 m² floor area):
• Total area: 100 m² × 2 coats = 200 m² coverage needed
• Paint required: Approx. 14.3 litres total
• Recommended: Three 5L tins (£147.75) or One 20L tin (£175.99)

Large Industrial Floor (250 m² floor area):
• Total area: 250 m² × 2 coats = 500 m² coverage needed
• Paint required: Approx. 36 litres total
• Recommended: Two 20L tins (£351.98)

Coverage may vary depending on surface porosity, texture, and condition. Porous or rough surfaces may require more paint. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and touch-ups.

Important: For porous concrete and cement screed, thin first coat 10% with SPO Paint Thinners to act as primer. Apply second coat unthinned for complete protection. Full hardness in 5–7 days.

Recommended System Products:
• Oil Remover for eliminating ingrained oils and grease
• Acid Etch for chemically preparing concrete floors
• Universal Degreaser for cutting through oil and grease
• SPO Paint Thinners for thinning first coat
• Zinc Phosphate Primer for priming metal surfaces
• Application Tools (brushes, rollers, extension poles)

Surface Preparation:

Concrete & Cement Screed Floors:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, dirt, and contamination
• For ingrained oils, use Coo-Var Oil Remover to eliminate oils that prevent coating adhesion
• Repair cracks, holes, and damaged areas with suitable concrete repair compound
• For smooth or power-floated concrete, chemically abrade with Coo-Var Acid Etch to create a key for optimal adhesion
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Wood Floors:
• Clean surface to remove dirt, dust, grease, and contamination
• Sand surface lightly to create a key and remove any existing finish
• Repair damaged areas with suitable wood filler and allow to dry
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Metal Floors & Surfaces:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, and contamination
• Remove rust with wire brush or rust remover
• Degrease metal surface thoroughly
• Prime bare metal with Teamac Zinc Phosphate Primer and allow to dry completely
• For previously painted metal, ensure coating is sound and well-adhered
• Surface must be clean, dry, and rust-free

Previously Painted Floors:
• Ensure existing coating is sound and well-adhered
• Remove any flaking or peeling paint with scraper
• Lightly abrade surface to improve adhesion
• Clean thoroughly with Universal Degreaser to remove oil, grease, and contamination
• Surface must be clean, dry, and well-adhered

Application:

• Stir paint thoroughly before use and occasionally during application
• Apply in temperatures between 10°C and 25°C for optimal drying
• Ensure good ventilation during application and drying (solvent-based product)
• Use Application Tools (brushes, short-pile rollers, extension poles) suitable for solvent-based paints
• Not recommended for spray application

First Coat (Primer on Porous Concrete and wood):
• For porous wood, concrete and cement screed, thin first coat 10% with SPO Paint Thinners
• Apply thinned first coat evenly to act as primer and seal porous surface
• Allow to dry for minimum 16 hours before applying second coat
• Coverage: Approx. 13–15 m² per litre per coat

Second Coat (Unthinned):
• Apply second coat unthinned for complete protection
• Apply evenly with brush or short-pile roller
• Brush out to avoid runs and sags
• Allow to cure for 5–7 days before exposing to heavy traffic
• Coverage: Approx. 13–15 m² per litre per coat

• Avoid application in damp, humid, or freezing conditions
• Clean tools immediately after use with SPO Paint Thinners or white spirit

Drying & Curing Times (at 20°C):

• Touch dry: 2 hours
• Hard dry: 12 hours
• Recoat time: Minimum 16 hours
• Light foot traffic: 24 hours
• Full hardness/Heavy traffic: 5–7 days

Drying times may be extended in cooler temperatures or high humidity.

Recommended System Products:
• Oil Remover – Eliminate ingrained oils and grease
• Acid Etch – Chemically prepare concrete floors
• Universal Degreaser – Cut through oil and grease
• SPO Paint Thinners – Thin first coat for primer
• Zinc Phosphate Primer – Prime metal surfaces
• Application Tools – Brushes, rollers, extension poles

• Finish / Texture: Semi-gloss
• Base: Solvent-based alkyd, single pack
• Available Colours: White, Black, Tile Red, Light Grey, Flint Grey, Blue, Forest Green, Yellow
• Pack Sizes: 5 L (all colours), 20 L (Tile Red, Grey)
• Coverage: 13–15 m²/L @ 40 µm DFT
• Drying Times @ 20 °C: Touch dry 2 hrs; Hard dry 12 hrs; Full hardness 5–7 days
• Re-coat Interval: Minimum 16 hrs / overnight
• Minimum Application Temp.: 5 °C
• VOC Content: Max 391 g/L
• Flash Point: > 32 °C (closed cup)
• Application Method: Brush or roller; thin up to 10 % with Thinners 14; not recommended for spray
• Surface Suitability: Masonry, concrete, cement screed, wood, primed metal
• Volume Solids: 51–60 %
• Wet Film Thickness: 75 µm
• Dry Film Thickness: 40–45 µm

Need detailed specs or prep guidance? Chat with our experts now and paint tomorrow!

What is Teamac Industrial Floor Paint and when should I use it?

Teamac Industrial Floor Paint is a cost-effective single pack heavy duty floor paint designed to protect workshop, garage, warehouse, and factory floors from heavy foot traffic, light vehicles, and moisture. Use it when you need straightforward, budget-friendly floor protection on concrete, wood, or primed metal floors without the complexity of two-pack systems.

What surfaces can I apply Industrial Floor Paint to?

Industrial Floor Paint is suitable for masonry, concrete, cement screed, wood, and primed metal floors. It's ideal for workshops, garages, warehouses, factories, and industrial environments. For bare metal, prime with Zinc Phosphate Primer first. For porous concrete, thin first coat 10% with SPO Paint Thinners to act as primer.

Do I need to prime concrete before applying Industrial Floor Paint?

For porous concrete and cement screed, thin the first coat 10% with SPO Paint Thinners and apply as a primer. This seals the porous surface and ensures optimal adhesion. Apply the second coat unthinned for complete protection. For smooth or power-floated concrete, chemically abrade with Acid Etch first to create a key.

How do I prepare floors before applying Industrial Floor Paint?

Clean floors with Universal Degreaser to remove oil, grease, and contamination. For ingrained oils, use Oil Remover. For smooth concrete, chemically abrade with Acid Etch. Repair cracks and damage with suitable filler. Ensure surface is clean, dry, and free from loose material before application.

How many coats of Industrial Floor Paint do I need?

For best results, apply 2 coats. For porous concrete, thin first coat 10% with SPO Paint Thinners to act as primer. Apply second coat unthinned for complete protection. Allow minimum 16 hours between coats. Full hardness in 5–7 days.

How long does Industrial Floor Paint take to dry?

Touch dry in 2 hours, hard dry in 12 hours at 20°C. Allow minimum 16 hours before recoating. Light foot traffic after 24 hours. Full hardness for heavy traffic in 5–7 days. Drying times may be extended in cooler temperatures or high humidity.

Can I spray Industrial Floor Paint?

Spray application is not recommended for Industrial Floor Paint. Use brush or short-pile roller for optimal finish. Brush and roller application provides better coverage and adhesion on floor surfaces.

What colours are available for Industrial Floor Paint?

Industrial Floor Paint is available in 8 colours: White, Black, Tile Red, Flint Grey, Light Grey, Forest Green, Yellow, and Blue. Use different colours to colour-code walkways, mark zones, or match corporate branding.

How much coverage can I expect from Industrial Floor Paint?

Industrial Floor Paint provides approximately 13–15 m² per litre per coat. A 5L tin covers 65–75 m² per coat, and a 20L tin covers 260–300 m² per coat. Coverage may vary depending on surface porosity and texture. We recommend ordering 10–15% extra for surface variation and touch-ups.

Is Industrial Floor Paint suitable for heavy vehicle traffic?

Industrial Floor Paint is suitable for heavy foot traffic, trolleys, and light vehicles. For heavy vehicle traffic (forklifts, cars, trucks), consult our experts for heavy-duty two-pack epoxy coatings designed for extreme traffic conditions.

Is Industrial Floor Paint chemical resistant?

Industrial Floor Paint resists and moisture but is not designed for high chemical exposure. For areas with acids, solvents, or aggressive chemicals, consult our experts for chemical-resistant floor coatings.

What's the difference between single pack and two-pack floor paints?

Single pack floor paints like Teamac Industrial Floor Paint are ready to use straight from the tin - no mixing required. They're cost-effective, DIY-friendly, and ideal for workshops, garages, and light industrial use. Two-pack epoxy coatings require mixing and offer extreme durability for heavy-duty applications but are more complex and expensive.

What products do I need to complete my industrial floor project?

We recommend using Oil Remover for eliminating ingrained oils, Acid Etch for chemically preparing concrete, Universal Degreaser for cutting through grease, SPO Paint Thinners for thinning first coat, Zinc Phosphate Primer for priming metal, and Application Tools (brushes, rollers, extension poles) for professional application. This complete system ensures maximum adhesion and durability.

Safety data sheet
Technical data sheet

Complete Your Industrial Floor Protection System:

• Coo-Var Oil Remover – Eliminates ingrained oils and grease that prevent coatings from bonding, ensuring your primer or paint adheres correctly from the very first coat

• Coo-Var Acid Etch – Chemically prepares concrete and power-floated floors by opening the surface and creating a rough, porous key that paints and screeds can properly grip

• Coo-Var Universal Degreaser – Rapidly cuts through oil, grease, and traffic film, leaving a spotless surface that helps your new coating achieve maximum durability

• SPO Paint Thinners – Improves flow and workability of your first coat, helping floor paint penetrate and bond effectively to concrete, masonry, and wood

• Teamac Zinc Phosphate Primer – Provides a strong, stable base on metal surfaces while delivering long-term corrosion protection

• Application Tools – High-quality brushes, rollers, and extension poles for smooth, efficient, and hassle-free application

Need help choosing the right products? Contact our experts via live chat for personalised advice!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.