SPO Tile & Melamine Primer - High-Adhesion Primer for Tiles, Melamine & Glossy Surfaces

• Paint melamine kitchen units, cabinets, and furniture without replacing them
• Prime tiles and melamine surfaces that are normally difficult for paint to adhere to
• Achieve strong, reliable adhesion on smooth, non-porous, glossy surfaces
• Update kitchens and bathrooms without removing existing wall tiles
• Create a dependable base coat to overcoat with your chosen topcoat(not restricted to tile-specific paints)• Use a water-based, low-odour primer(≤30 g/LVOC) suitable for internal use with minimal ventilation
• Transform dated tiles, melamine, or glossy surfaces at a fraction of replacement costs

• Paint tiles that are constantly exposed to water, such as shower enclosures, wet rooms, or shower trays(use specialist wet-room coatings)

• Paint floor tiles or areas subject to regular foot traffic(this is a wall-only primer)

• Apply over surfaces that are dirty, greasy, or poorly prepared(thorough cleaning and light abrasion required)

• Use on external tiles or surfaces exposed to weather(interior use only)• Useas a final decorative finish rather than a primer(must be topcoated for protection)

• Applyin temperatures below 7°C(minimum application temperature required for proper curing)

SPO Tile & Melamine Primer bonds to tricky, glossy surfaces and lets you give shiny tiles, melamine cupboards, and fitted furniture a brand-new look without costly replacements. This water-based acrylic primer (≤30 g/L VOC) grips like glue to smooth, non-porous surfaces, turning slick areas into paint-ready canvases so you can refresh kitchens, bathrooms, or fitted furniture in hours, not days.

Developed by the chemists at Specialist Paints Online and manufactured in the UK to exacting standards, it's the fast, affordable way to unlock any colour scheme with a finish that stays put for years. The high-adhesion formula (45-50 µm DFT) creates a strong bond that resists chips, scratches, and steam.

Key Benefits

• Any Look, Any Topcoat – Prime once and finish in satin, gloss, eggshell, chalk, or spray paints for the exact style you want. Not restricted to tile-specific paints.

• Cut Renovation Spend – Update tiles and cabinets for a fraction of the price of ripping out and replacing. Save thousands on kitchen and bathroom renovations.

• Instant Room Upgrade – Fresh white undercoat brightens spaces and sets the stage for show-home results. Transforms dated tiles and melamine instantly.

• No-Mess Makeover – Low-odour, water-based formula means no dust, no tile removal, and simple water cleanup. Safe for occupied homes.

• Finish That Lasts – High-bond acrylic film (36% volume solids) locks topcoats tight, resisting chips, scratches, and steam for years. Tested in demanding kitchen and bathroom environments.

• Fast Turnaround – Touch dry in 2 hours, hard dry in 4-6 hours, ready for topcoat in 12 hours. Complete your project in a weekend.

Refresh your space the easy way. Order today, apply tomorrow. Just brush or roll it on—it's touch dry in two hours and ready for colour the very next day. With next-day UK delivery, you'll enjoy a flawless, long-lasting finish before the weekend.

SPO Tile & Melamine Primer | High-Adhesion Primer is the go-to solution for creating a reliable painting base on notoriously slick or glossy surfaces:

• Kitchen & Bathroom Renovations – Perfect for preparing tiled splashbacks, wall tiles, countertops, or melamine cabinets. Achieve a refreshed, modern look without replacing entire surfaces. Save thousands on renovation costs while transforming dated kitchens and bathrooms.

• DIY & Home Improvement – A must-have for homeowners tackling tricky makeovers, from repainting melamine furniture and IKEA units to revamping old tile features. The low-odour, water-based formula is safe for occupied homes and requires minimal ventilation.

• Hospitality & Retail – Great for cafés, bars, restaurants, and shops seeking a cost-effective way to update tiled walls, melamine fixtures, or glossy surfaces for a more modern appearance. Quick-drying formula (touch dry in 2 hours) minimizes business downtime.

• Property Maintenance – Suited to landlords, facility managers, and maintenance contractors needing a durable, long-lasting primer for high-traffic areas like communal kitchens, washrooms, or rental property bathrooms. Extends the life of existing tiles and melamine.

• Education & Public Buildings – Excellent for refurbishing tiled corridors, staff kitchens, locker rooms, or washrooms in schools, offices, or community centres. Ensures a robust foundation for new paint that withstands daily use.

If you need guidance on preparation steps or choosing a suitable topcoat, contact our experts now via the live chat for tailored recommendations!

Coverage: Approximately 8 m² per litre per coat (at recommended 45-50 µm dry film thickness)

Coverage per size

• 1 litre: Covers approx. 8 m² per coat
• 2.5 litres: Covers approx. 20 m² per coat

Recommended coats

• 1 coat for most tiles and melamine surfaces
• 2 coats for maximum adhesion on very glossy or difficult surfaces

Example calculations

• For a standard kitchen splashback (approx. 4 m²), you will need approximately 0.5 litres (500ml) for 1 coat
• For a standard-sized tiled bathroom wall (approx. 10 m²), you will need approximately 1.25 litres for 1 coat
• For a full set of melamine kitchen units (approx. 15 m²), you will need approximately 1.9 litres for 1 coat

When priming melamine units, cupboards, or panels, coverage will vary depending on size, edges, and detailing. Grout lines on tiles may reduce effective coverage.

Practical coverage may be lower depending on surface condition, tile texture, grout lines, and application method. For accurate project planning, we recommend ordering 10-15% extra to account for surface variation.

Surface Preparation

• Ensure all surfaces are clean, dry, and free from grease, oil, soap residue, and contaminants
• Clean tiles thoroughly with Fluxaf Power Clean or Fluxaf Mould and Mildew Remover
• Remove any loose or flaking material, old sealant, or damaged grout
• Lightly abrade tiles or melamine surfaces with fine-grit sandpaper (180-240 grit) to provide a good key for adhesion
• Remove all sanding dust with a tack cloth or damp cloth
• Avoid inhalation of dust—wear a suitable dust mask if dry sanding
• Ensure surface and air temperature is above 7°C (minimum application temperature)
• Provide adequate ventilation during application and drying

Application

• Stir primer thoroughly before use and occasionally during application
• Apply in temperatures between 7°C and 25°C for optimal drying
• Use a good-quality brush or short-pile roller
• Thin with clean water if required (maximum 10% for brush/roller application)
• Apply first coat evenly, working primer well into the surface
• Pay special attention to edges, corners, and grout lines
• Aim for a wet film thickness of approximately 120 µm (this will dry to 45-50 µm)
• Allow to dry for minimum 12 hours (overnight recommended) before applying second coat or topcoat
• For maximum adhesion on very glossy surfaces, apply a second primer coat
• Avoid application in damp, humid, or freezing conditions

Drying & Curing Times (at 20°C)

• Touch dry: 2 hours
• Hard dry: 4-6 hours
• Recoat time: Minimum 12 hours / overnight recommended
• Topcoat application: After 12 hours minimum
• Full cure: 3-5 days (primer will continue to harden during this period)

Drying times may be extended in cooler temperatures or high humidity. Ensure adequate ventilation during application and drying.

Important Notes

• NOT suitable for floor tiles or areas subject to foot traffic
• NOT suitable for shower enclosures, wet rooms, or areas constantly exposed to water
• For best results, use a topcoat suitable for kitchens/bathrooms (moisture-resistant)
• Allow primer to cure fully (3-5 days) before exposing to moisture or steam

• Finish / Texture: Matt
• Base: Water-based acrylic
• Available Colours: White
• Pack Sizes: 0.25 L, 0.5 L, 1 L, 2.5 L
• Coverage: ~8 m²/L @ 45 µm DFT
• Drying Times @ 20 °C: Touch dry 2 hrs; Hard dry 4–6 hrs; Full hardness 3–5 days
• Re-coat Interval: 12 hrs or overnight
• Minimum Application Temp.: 7 °C
• VOC Content: Max 30 g/L
• Flash Point: Non-flammable
• Application Method: Brush or roller; thin up to 10 % with clean water
• Surface Suitability: Ceramic tiles, glazed tiles, melamine, laminate cabinetry
• Volume Solids: 36 %
• Wet Film Thickness: 120 µm
• Dry Film Thickness: 45–50 µm

Need detailed specs or prep guidance? Chat with our experts now and paint tomorrow!

1. What is SPO Tile & Melamine Primer used for?

SPO Tile & Melamine Primer is a water-based acrylic primer designed to create a strong, lasting bond on glossy, smooth, non-porous surfaces like ceramic tiles, glazed tiles, melamine cabinets, laminate furniture, and other hard-to-paint surfaces. It prevents chipping or peeling and ensures your topcoat adheres firmly, allowing you to refresh kitchens, bathrooms, and furniture without costly replacements.

2. On which surfaces can I use this primer?

It's ideal for indoor wall surfaces such as bathroom and kitchen tiles (NOT floor tiles), melamine cabinets and furniture, laminate cabinetry, glossy painted surfaces, and other smooth, non-porous areas. Make sure the surface is clean, dry, lightly abraded, and free of grease before applying. NOT suitable for shower enclosures, wet rooms, or floor tiles.

3. How do I apply SPO Tile & Melamine Primer?

Apply using a good-quality brush or short-pile roller in temperatures above 7°C. Lightly abrade particularly glossy surfaces with fine-grit sandpaper (180-240 grit) and wipe away dust or debris. Clean thoroughly with Fluxaf Power Clean. Then apply a thin, even coat of primer and let it dry fully (minimum 12 hours) before topcoating. Coverage is approximately 8 m² per litre per coat.

4. How long should I wait before painting over the primer?

The primer is ready for a topcoat after a minimum of 12 hours (overnight is recommended). At 20°C, it's touch dry in 2 hours and hard dry in 4-6 hours. Full cure is achieved after 3-5 days. Drying time can vary based on temperature and humidity, so plan accordingly.

5. Do I need a special topcoat after using SPO Tile & Melamine Primer?

Not necessarily. Once the primer is fully cured, you can apply most standard interior paints (satin, gloss, eggshell, chalk, spray paints). For kitchens and bathrooms, we recommend using a moisture-resistant topcoat for best results. You are NOT restricted to tile-specific paints—this primer allows you to use any topcoat you desire.

6. Can I use this primer on areas exposed to moisture, like showers?

NO. SPO Tile & Melamine Primer is NOT suitable for shower enclosures, wet rooms, shower trays, or areas constantly exposed to water. It's designed for wall tiles in kitchens and bathrooms that are not directly in the shower/wet area. For wet areas, use specialist wet-room coatings.

7. Can I use this primer on floor tiles?

NO. This primer is NOT suitable for floor tiles or areas subject to regular foot traffic. It's designed for wall applications only. For floor tiles, use a specialist floor tile paint system.

8. What coverage can I expect from SPO Tile & Melamine Primer?

You can expect approximately 8 m² per litre per coat, although this can vary depending on the surface's condition, tile texture, grout lines, and how thickly the primer is applied. A 1L tin covers 8 m², while a 2.5L tin covers 20 m². Even, thin coats are best for optimal coverage and adhesion.

9. Do I need to sand tiles before priming?

Yes. Light abrasion with fine-grit sandpaper (180-240 grit) is essential for good adhesion. This creates a key for the primer to grip onto. After sanding, remove all dust with a tack cloth and clean thoroughly with Fluxaf Power Clean to remove grease and soap residue.

Need more information on prepping glossy surfaces or selecting a compatible topcoat?

For tailored advice, surface preparation tips, or topcoat recommendations, contact our experts now via live chat—we're here to help you achieve a durable, professional finish!

Technical data sheet

Free Delivery on Orders Over £75: Stock up on everything you need in one go and complete the job properly

• Fluxaf Power Clean: Clean the surface and strip away grease, glue and grime ready for painting
• Fluxaf Mould & Mildew Stain Remover: treat mould, mildew and their stains prior to painting
• Application Tools: High-quality brushes, rollers, trays for smooth coverage

These products are commonly combined for best long-term results.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.