Coo-Var Anti-Slip Acrylic Floor Paint - Water-Based Low Odour Anti-Slip Floor Paint

• Reduce slip risks on interior and exterior floors with water-based low-odour anti-slip floor paint

• Use in occupied spaces where low odour and fast-drying are essential (homes, offices, schools, commercial spaces)

• Apply to multiple surfaces including concrete, wood, tarmac, stone, brickwork, and primed metal floors

• Achieve fast-drying quick turnaround (touch dry 1 hour, hard dry 4 hours, recoat 6 hours) for minimal disruption

• Provide textured grip for walkways, ramps, wet areas, commercial entrances, and light traffic zones

• Enjoy easy soap-and-water cleanup without solvent handling (DIY-friendly and professional-grade)

• Choose from 7 standard colours or custom RAL, BS, and NCS tints for unlimited colour options

• Use water-based anti-slip floor paint from Coo-Var (115+ years British coating expertise, trusted by homeowners and professionals)

• Use on floors with heavy vehicle traffic (forklifts, cars, trucks—use Coo-Var Profloor Plus 2-pack epoxy instead)

• Apply to surfaces with active oil or grease contamination (clean with Coo-Var Oil Remover or Universal Degreaser first)

• Use on wet, damp, or saturated surfaces (surface must be dry before application)

• Apply to smooth concrete without preparation (chemically abrade with Coo-Var Acid Etch or mechanically abrade for optimal adhesion)

• Apply to bare metal without priming (prime with SPO All Metals Primer first for optimal adhesion and rust prevention)

• Achieve instant full hardness (full hardness requires 5–7 days for light foot traffic—plan for curing time)

• Use in temperatures below 7°C (minimum application temperature 7°C for proper cure)

Coo-Var Anti-Slip Acrylic Floor Paint is a water-based low-odour anti-slip floor paint designed to reduce slip risks in light traffic areas where grip and minimal odour are essential. Unlike standard floor paints that become slippery when wet, this fine aggregated formulation provides textured grip whilst remaining low odour and fast-drying for occupied spaces.

Developed by Coo-Var with over 115 years of British coating expertise, Anti-Slip Acrylic Floor Paint is the ideal solution for walkways, ramps, commercial entrances, workshops, wet areas, and light industrial floors requiring slip resistance. The water-based formulation allows easy soap-and-water cleanup, making it perfect for DIY users and professionals requiring straightforward anti-slip application.

When floors in walkways, ramps, and wet areas become slippery, slip risks increase, creating safety hazards and potential liability. Coo-Var Anti-Slip Acrylic Floor Paint's fine aggregated texture provides grip to reduce slip risks, whilst the low-odour water-based formulation (≤ 41 g/L VOC) ensures safe application in homes, offices, schools, and commercial spaces.

The fast-drying formulation (touch dry 1 hour, hard dry 4 hours, recoat 6 hours) allows quick return to service with minimal disruption. The matt anti-slip finish provides durable grip whilst remaining easy to clean with gentle sweeping or mopping. Available in 7 standard colours plus custom RAL, BS, and NCS tints for unlimited colour options.

Suitable for concrete, wood, tarmac, stone, brickwork, and primed metal floors in residential, commercial, and light industrial environments. Not suitable for heavy vehicle traffic – for forklifts and heavy vehicles, use Coo-Var Profloor Plus 2-pack epoxy. Stir well before and during application to ensure aggregates are evenly dispersed for consistent anti-slip performance.

Manufactured in the UK to rigorous standards and trusted by homeowners, property managers, facilities managers, and professional decorators for low-odour anti-slip floor protection in occupied spaces.

Key Benefits:

• Anti-Slip Textured Grip – Fine aggregated formulation provides textured grip to reduce slip risks on floors. Ideal for walkways, ramps, wet areas, and light traffic zones. Improves safety and reduces liability.

• Low-Odour Water-Based Formula – Water-based acrylic formulation is low odour (≤ 41 g/L VOC) and safe for occupied spaces. Ideal for homes, offices, schools, and commercial spaces where solvent-based paints are unsuitable. Easy soap-and-water cleanup.

• Fast-Drying Quick Turnaround – Touch dry in 1 hour, hard dry in 4 hours, recoat after 6 hours. Quick return to service for minimal disruption. Full hardness in 5–7 days for light foot traffic.

• Light Traffic Protection – Durable matt anti-slip finish protects floors from light foot traffic. Suitable for residential, commercial, and light industrial use. Not suitable for heavy vehicle traffic.

• Multi-Surface Compatibility – Suitable for concrete, wood, tarmac, stone, brickwork, and primed metal floors. Prime metal with SPO All Metals Primer. Versatile solution for interior and exterior floors.

• Easy Application & Cleanup – Apply by brush or short-pile roller. Stir well to disperse aggregates. Water cleanup with soap and water. DIY-friendly and professional-grade. No solvent handling required.

• 7 Colours + Custom Tints – Available in Grey, Light Grey, White, Black, Tile Red, Yellow, and Forest Green. Custom RAL, BS, and NCS tints available for unlimited colour options.

• Coo-Var Heritage – Over 115 years of British coating expertise. Trusted by homeowners, property managers, and professional decorators for low-odour anti-slip floor protection.

Boost safety with low-odour water-based anti-slip floor paint. Add to basket now and reduce slip risks.

Coo-Var Anti-Slip Acrylic Floor Paint is the perfect choice for low-odour anti-slip floor protection in a variety of residential, commercial, and light industrial applications:

• Walkways & Ramps – Ideal for walkways, ramps, and pedestrian areas requiring slip resistance. Fine aggregated texture provides grip to reduce slip risks. Low-odour water-based formulation safe for occupied spaces. Fast-drying for minimal disruption.

• Commercial Entrances – Great for commercial entrances, reception areas, and retail spaces where slip prevention and professional appearance are essential. Anti-slip texture improves safety. Available in 7 colours plus custom tints for brand matching.

• Workshops & Garages – Perfect for workshop floors, garage floors, and light industrial areas requiring anti-slip protection. Low-odour formula eliminates strong solvent fumes. Fast-drying allows quick return to use. Withstands light foot traffic.

• Schools & Public Buildings – Suitable for school corridors, classrooms, and public buildings where low-odour anti-slip paints are preferred. Fast-drying allows application during term time with minimal disruption. Safe for occupied spaces with low VOC content.

• Wet Areas & Kitchens – A must-have for wet areas, kitchens, and areas prone to moisture where slip risks are higher. Anti-slip texture provides grip when wet. Water-based formula safe for food preparation areas. Easy to clean with gentle mopping.

• Light Industrial Floors – Ideal for light industrial floors, storage areas, and commercial spaces with light foot traffic. Water-based formula eliminates strong solvent fumes. Anti-slip texture improves workplace safety. Not suitable for heavy vehicle traffic.

If you need further advice on using Coo-Var Anti-Slip Acrylic Floor Paint for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 5–9 m² per litre @ 35 µm DFT

Per Tin Coverage (Single Coat):
• 2.5 litres: Covers approx. 12.5–22.5 m²
• 5 litres: Covers approx. 25–45 m²

Recommended Application: 2 coats for optimal anti-slip performance and durability

Example Calculations:

Small Walkway or Entrance (10 m² floor area):
• Total area: 10 m² × 2 coats = 20 m² coverage needed
• Paint required: Approx. 2.9 litres total
• Recommended: One 2.5L tin (£39.99) + One additional 2.5L tin (£39.99) = £79.98 or one 5L tin (£73.95)

Medium Ramp or Workshop (25 m² floor area):
• Total area: 25 m² × 2 coats = 50 m² coverage needed
• Paint required: Approx. 7.2 litres total
• Recommended: Two 5L tins (£147.90)

Large Commercial Floor (50 m² floor area):
• Total area: 50 m² × 2 coats = 100 m² coverage needed
• Paint required: Approx. 14.3 litres total
• Recommended: Three 5L tins (£221.85)

Coverage may vary depending on surface porosity, texture, and aggregate dispersion. Porous or rough surfaces may require more paint. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and touch-ups.

Important: Stir well before and during application to ensure aggregates are evenly dispersed for consistent anti-slip performance. Apply 2 coats for optimal grip. Full hardness 5–7 days before light foot traffic.

Recommended System Products:
• Coo-Var Oil Remover for eliminating ingrained oils
• Coo-Var Universal Degreaser for cutting through grease
• Coo-Var Acid Etch for chemically preparing concrete
• SPO All Metals Primer for priming metal surfaces
• Application Tools (brushes, rollers, extension poles)

Surface Preparation:

Concrete Floors:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, dirt, and contamination
• For ingrained oils, use Coo-Var Oil Remover to eliminate oils that prevent paint adhesion
• Repair cracks, holes, and damaged areas with suitable concrete repair compound
• For smooth or power-floated concrete, chemically abrade with Coo-Var Acid Etch to create a key for optimal adhesion
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Wood Floors:
• Clean surface to remove dirt, dust, grease, and contamination
• Sand surface lightly to create a key and remove any existing finish
• Repair damaged areas with suitable wood filler and allow to dry
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Tarmac, Stone & Brickwork:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, and contamination
• Repair damaged areas with suitable repair compound
• Ensure surface is sound and free from loose material
• Surface must be clean, dry, and free from contamination

Metal Surfaces:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, and contamination
• Remove rust with wire brush or rust remover
• Degrease metal surface thoroughly
• Prime bare metal with SPO All Metals Primer and allow to dry completely
• For previously painted metal, ensure coating is sound and well-adhered
• Surface must be clean, dry, and rust-free

Previously Painted Floors:
• Ensure existing coating is sound and well-adhered
• Remove any flaking or peeling paint with scraper
• Lightly abrade glossy surfaces to improve adhesion
• Clean thoroughly with Coo-Var Universal Degreaser to remove grease and contamination
• Surface must be clean, dry, and well-adhered

Application:

IMPORTANT: Stir paint thoroughly before use and occasionally during application to ensure aggregates are evenly dispersed for consistent anti-slip performance.

• Apply in temperatures above 7°C for optimal drying
• Ensure good ventilation during application and drying
• Use Application Tools (brushes, short-pile rollers) suitable for water-based paints
• Apply direct to wood, Coo-Var All Metals Primer on Metal, Coo-Var Anti-Slip Acrylic Floor Paint thinned 5% with clean water on all other unpainted surfaces.

Brush Application:
• Use good-quality brush suitable for water-based paints
• Apply evenly, working paint well into the surface
• Brush out to avoid runs and sags
• Stir frequently to keep aggregates dispersed
• Coverage: Approx. 5–9 m² per litre per coat

Roller Application:
• Use short-pile roller suitable for water-based paints
• Apply evenly with consistent pressure
• Avoid over-rolling which can cause bubbles
• Stir frequently to keep aggregates dispersed
• Coverage: Approx. 5–9 m² per litre per coat

• Apply first coat evenly across entire floor surface
• Allow to dry for minimum 6 hours before applying second coat
• Apply second coat for optimal anti-slip performance and durability
• Allow final coat to cure for 5–7 days before exposing to light foot traffic
• Avoid application in damp, humid, or freezing conditions
• Clean tools immediately after use with soap and water

Drying & Curing Times (at 20°C):

• Touch dry: 1 hour
• Hard dry: 4 hours
• Recoat time: Minimum 6 hours
• Light foot traffic: 5–7 days

Drying times may be extended in cooler temperatures or high humidity.

Recommended System Products:
• Coo-Var Oil Remover – Eliminate ingrained oils
• Coo-Var Universal Degreaser – Cut through grease
• Coo-Var Acid Etch – Chemically prepare concrete
• SPO All Metals Primer – Prime metal surfaces
• Application Tools – Brushes, rollers, extension poles

• Finish / Texture: Matt, anti-slip
• Base: Water-based acrylic
• Available Colours: Tile Red, Grey, Light Grey, Yellow, Green, Black, White, Clear
• Pack Sizes: 2.5 L, 5 L
• Coverage: 5–9 m²/L @ 35 µm DFT
• Drying Times @ 20 °C: Touch dry 1 hr; Hard dry 4 hrs; Full hardness 5–7 days
• Re-coat Interval: Minimum 6 hrs
• Minimum Application Temp.: 7 °C
• VOC Content: Max 41 g/L
• Flash Point: Non-flammable
• Application Method: Brush or roller; thin up to 10 % with clean water
• Surface Suitability: Concrete, wood, tarmac, stone, brickwork, metal (with suitable primer)
• Volume Solids: 34–36 %
• Wet Film Thickness: 100–110 µm
• Dry Film Thickness: 35–40 µm

Need detailed specs or prep guidance? Chat with our experts now and paint tomorrow!

What is Coo-Var Anti-Slip Acrylic Floor Paint and when should I use it?

Coo-Var Anti-Slip Acrylic Floor Paint is a water-based low-odour anti-slip floor paint designed to reduce slip risks in light traffic areas where grip and minimal odour are essential. Use it on walkways, ramps, commercial entrances, workshops, wet areas, and light industrial floors in residential, commercial, and light industrial environments.

What's the difference between Anti-Slip Acrylic Floor Paint and standard Acrylic Floor Paint?

Anti-Slip Acrylic Floor Paint contains fine aggregates that create a textured grip surface to reduce slip risks. Standard Acrylic Floor Paint provides a smooth semi-gloss finish without anti-slip properties. Use Anti-Slip for areas requiring grip (walkways, ramps, wet areas) and standard Acrylic for areas not requiring anti-slip texture.

Is Anti-Slip Acrylic Floor Paint suitable for heavy vehicle traffic?

No, Anti-Slip Acrylic Floor Paint is designed for light foot traffic only. It is not suitable for heavy vehicle traffic (forklifts, cars, trucks). For heavy vehicle traffic, use Coo-Var Profloor Plus 2-pack epoxy.

How do I ensure consistent anti-slip performance?

Stir paint thoroughly before use and occasionally during application to ensure aggregates are evenly dispersed. This ensures consistent anti-slip texture across the entire floor surface. Apply 2 coats for optimal anti-slip performance.

Can I use Anti-Slip Acrylic Floor Paint outdoors?

Yes, Anti-Slip Acrylic Floor Paint is suitable for interior and exterior floors. The water-based acrylic formulation is weather-resistant and can withstand UK outdoor conditions. Ensure surface is dry before application and avoid application if rain is expected within 6 hours.

How many coats of Anti-Slip Acrylic Floor Paint do I need?

For optimal anti-slip performance and durability, apply 2 coats. Allow minimum 6 hours between coats. The two-coat system provides complete coverage, maximum grip, and professional anti-slip finish.

How long does Anti-Slip Acrylic Floor Paint take to dry?

Touch dry in 1 hour, hard dry in 4 hours at 20°C. Allow minimum 6 hours before recoating. Light foot traffic after 5–7 days. Drying times may be extended in cooler temperatures or high humidity.

Can I apply Anti-Slip Acrylic Floor Paint to wood floors?

Yes, Anti-Slip Acrylic Floor Paint can be applied to wood floors. Sand the surface lightly to create a key, clean thoroughly, then apply 2 coats. Suitable for interior and exterior wood floors requiring anti-slip grip.

Can I apply Anti-Slip Acrylic Floor Paint to metal surfaces?

Yes, Anti-Slip Acrylic Floor Paint can be applied to metal surfaces when properly primed. Clean and degrease the metal surface, remove any rust, then prime with SPO All Metals Primer. Allow primer to dry completely before applying Anti-Slip Acrylic Floor Paint.

What colours are available for Anti-Slip Acrylic Floor Paint?

Anti-Slip Acrylic Floor Paint is available in 7 standard colours: Grey, Light Grey, White, Black, Tile Red, Yellow, and Forest Green. Custom RAL, BS, and NCS tints are available for unlimited colour options.

How much coverage can I expect from Anti-Slip Acrylic Floor Paint?

Anti-Slip Acrylic Floor Paint provides approximately 5–9 m² per litre per coat at 35 µm DFT. A 2.5L tin covers 12.5–22.5 m², and a 5L tin covers 25–45 m². Coverage may vary depending on surface porosity and aggregate dispersion. We recommend ordering 10–15% extra for surface variation and touch-ups.

How do I clean floors before applying Anti-Slip Acrylic Floor Paint?

Clean floors with Coo-Var Universal Degreaser to remove oil, grease, and contamination. For ingrained oils, use Coo-Var Oil Remover. For smooth concrete, chemically abrade with Coo-Var Acid Etch. Ensure surface is clean, dry, and free from loose material before application.

What products do I need to complete my anti-slip floor project?

We recommend using Coo-Var Oil Remover for eliminating oils, Coo-Var Universal Degreaser for cutting through grease, Coo-Var Acid Etch for preparing concrete, SPO All Metals Primer for priming metal, and Application Tools (brushes, rollers, extension poles). This complete system ensures maximum adhesion and anti-slip performance.

Safety data sheet
Technical data sheet

Complete Your Anti-Slip Floor Protection System:

• Coo-Var Oil Remover – Eliminates ingrained oils and grease that prevent coatings from bonding, ensuring your primer or paint adheres correctly from the very first coat

• Coo-Var Universal Degreaser – Rapidly cuts through oil, grease, and traffic film, leaving a spotless surface that helps your new coating achieve maximum durability

• Coo-Var Acid Etch – Chemically prepares concrete and power-floated floors by opening the surface and creating a rough, porous key that paints and screeds can properly grip

• SPO All Metals Primer – Prime metal surfaces before application for optimal adhesion and rust prevention

• Application Tools – High-quality brushes, rollers, and extension poles for smooth, efficient, and hassle-free application

Need help choosing the right products? Contact our experts via live chat for personalised advice!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.