SPO Anti-Slip Floor Paint - Textured Anti-Slip Coating for Concrete, Wood & Metal Floors

• Create slip-resistant surfaces on concrete, wood, metal, or GRP floors exposed to moisture, spillages, oil, grease, or heavy foot traffic

• Reduce slip risk on steps, ramps, loading bays, platforms, walkways, wet areas, shower rooms, or machinery zones

• Apply a textured anti-slip coating for interior and exterior use that withstands foot traffic, light truck traffic, and occasional heavy truck use

• Colour-code safety zones, walkways, or hazard areas with 8 available colours (Black, White, Tile Red, Forest Green, Light Grey, Grey, Yellow, Blue)

• Use a solvent-based, heavily aggregated formula that provides instant grip and long-lasting durability (60% volume solids, 60–100 µm DFT)

• Apply over a suitable primer (SPO Floor Paint for concrete, SPO General Purpose Stain Block Primer for wood, Teamac Zinc Phosphate Primer for metal) for optimal adhesion and performance

• Comply with health and safety regulations for slip prevention in commercial, industrial, or public spaces

• Paint bare surfaces without priming first (this product requires a suitable primer for optimal adhesion—use SPO Floor Paint, SPO General Purpose Stain Block Primer or Teamac Zinc Phosphate Primer for metal)

• Apply to surfaces with rising damp, penetrating damp, or active moisture ingress (address underlying moisture issues first)

• Use on surfaces exposed to constant chemical spillages or aggressive solvents (use specialist chemical-resistant coatings instead)

• Apply in temperatures below 10°C or in damp, humid, or freezing conditions that may affect drying and performance

• Thin the paint (this product must not be thinned—apply as supplied to maintain anti-slip aggregate suspension)

• Achieve a smooth, non-textured finish (the anti-slip aggregates create a textured surface that's essential for slip resistance)

• Use on bare metal without priming (apply Teamac Zinc Phosphate Primer to bare metal first for proper adhesion and corrosion protection)

SPO Anti-Slip Floor Paint is a solvent-based, heavily aggregated coating that creates a durable, slip-resistant surface on concrete, wood, metal, and GRP floors. The textured finish provides instant grip underfoot, reducing the risk of slips, trips, and falls in areas exposed to moisture, spillages, grease, or heavy foot traffic.

The high-solids formula (60% volume solids) lays down a thick, protective film with embedded anti-slip aggregates that maintain their grip even when wet. This makes it ideal for steps, ramps, loading bays, commercial kitchens, wet areas, and any location where slip safety is critical. The solvent-based alkyd resin provides excellent adhesion and durability, withstanding foot traffic, light truck traffic, and occasional heavy truck use.

Available in 8 colours (Black, White, Tile Red, Forest Green, Light Grey, Grey, Yellow, Blue), it allows you to colour-code safety zones, match corporate branding, or create clear visual demarcation for walkways and hazard areas. The textured finish is hard-wearing and long-lasting, reducing maintenance costs and providing years of reliable slip protection.

Manufactured in the UK to exacting standards and backed by Specialist Paints Online expertise, it's suitable for both interior and exterior use. Apply it over a suitable primer (Thinned SPO Floor Paint for concrete, SPO General Purpose Stain Block Primer for wood, Teamac Zinc Phosphate Primer for metal) with a brush or roller, and enjoy instant slip resistance that protects your staff, customers, and visitors.

Key Benefits:

• Instant Slip Resistance – Heavily aggregated texture provides immediate grip underfoot, reducing slip risk in wet, oily, or high-traffic areas (60–100 µm DFT textured finish).

• Durable & Hard-Wearing – Solvent-based alkyd with 60% volume solids creates a tough, protective film that withstands foot traffic, light truck traffic, and occasional heavy truck use.

• 8 Colour Options – Choose from Black, White, Tile Red, Forest Green, Light Grey, Grey, Yellow, or Blue to colour-code safety zones, match branding, or create visual demarcation.

• Interior & Exterior Use – Suitable for both indoor and outdoor applications including steps, ramps, loading bays, walkways, wet areas, and machinery zones.

• Cost-Effective Safety Solution – Reduces slip-related accidents, insurance claims, and liability costs. One 5L tin covers 30–50 m² for under £70.

• Professional Results – Solvent-based formula provides excellent adhesion and durability. Apply over suitable primer for optimal performance and longevity.

• Fast Application – Touch dry in 6 hours, recoat overnight (16 hours minimum). Two coats provide long-lasting slip protection and professional finish.

Apply it today, walk safely tomorrow. Add to basket now and protect your floors from slip hazards.

SPO Anti-Slip Floor Paint | Textured Anti-Slip Coating is the perfect choice for reducing slip risk and improving safety in a variety of commercial, industrial, and residential environments:

• Industrial & Manufacturing – Ideal for factory floors, warehouse walkways, loading bays, platforms, machinery areas, and workshops where slip hazards from oil, grease, or spillages are common. The textured finish withstands foot traffic, light truck traffic, and occasional heavy truck use. Available in 8 colours for safety zone demarcation.

• Commercial Kitchens & Hospitality – Great for commercial kitchen floors, restaurant back-of-house areas, bar floors, and food preparation zones where wet conditions and spillages create slip risks. The solvent-based formula provides excellent adhesion and durability in high-traffic, moisture-prone environments.

• Retail & Public Spaces – Suitable for shop floors, shopping centre walkways, public building entrances, corridors, and high-traffic areas where slip prevention is critical for customer and visitor safety. Colour options allow for branding or visual demarcation.

• Steps, Ramps & Walkways – Perfect for external steps, access ramps, pedestrian walkways, fire escapes, and any sloped or elevated surfaces where slip risk is heightened. The textured finish provides grip in wet weather and reduces accident liability.

• Wet Areas & Shower Rooms – Ideal for shower rooms, changing rooms, swimming pool surrounds, leisure centre wet areas, and any location exposed to constant moisture. The anti-slip texture maintains grip even when wet.

• Property Maintenance & DIY – A must-have for landlords, facility managers, and homeowners looking to improve safety on garage floors, shed floors, external steps, driveways, or workshop areas. Cost-effective slip prevention solution with professional results.

If you need further advice on using SPO Anti-Slip Floor Paint for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 6–10 m² per litre per coat (at recommended 60–100 µm dry film thickness)

Per Tin Coverage (Single Coat):
• 1 litre: Covers approx. 6–10 m²
• 2.5 litres: Covers approx. 15–25 m²
• 5 litres: Covers approx. 30–50 m²

Recommended Application: 2 coats over suitable primer for optimal slip resistance and durability

Use SPO Floor Paint for concrete, SPO General Purpose Stain Block Primer for wood or Teamac Zinc Phosphate Primer for metal

Example Calculations:

Small Steps or Ramp (5 m²):
• Total area: 5 m² × 2 coats = 10 m² coverage needed
• Paint required: Approx. 1–1.7 litres total
• Recommended: Two 1L tins (£49.00)

Medium Walkway or Loading Bay (20 m²):
• Total area: 20 m² × 2 coats = 40 m² coverage needed
• Paint required: Approx. 4–6.7 litres total
• Recommended: One 5L tin + one 1L tin (£94.45) OR two 2.5L tins (£89.20)

Large Factory Floor or Warehouse Walkway (50 m²):
• Total area: 50 m² × 2 coats = 100 m² coverage needed
• Paint required: Approx. 10–16.7 litres total
• Recommended: Two 5L tins + one 2.5L tin (£184.50)

*Coverage may vary depending on surface porosity, texture, and application method. Porous or rough surfaces (such as unsealed concrete) may require more paint. The heavily aggregated formula may reduce coverage compared to standard floor paints. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and touch-ups.

Surface Preparation:

Concrete & Masonry:
• Ensure surface is fully cured (minimum 28 days for new concrete)
• Remove all dust, dirt, oil, grease, and loose material using Coo-Var Universal Degreaser or Oil Remover
• Etch porous or smooth concrete with Teamac Acid Etch to improve adhesion
• Repair cracks and holes with suitable concrete filler and allow to cure
• Surface must be clean, dry, and free from moisture (test for rising damp if necessary)
• Prime with Thinned SPO Floor Paint (2 coats) and allow to dry fully before applying anti-slip topcoat

Wood:
• Sand surface to remove old paint, varnish, or contamination
• Fill gaps and holes with wood filler
• Prime bare wood with suitable wood primer before applying anti-slip topcoat (SPO General Purpose Stain Block Primer)
• Ensure surface is clean, dry, and dust-free

Metal:
• Remove rust, scale, and old paint by wire brushing or sanding. Apply Teamac Rust Converter to stubborn rust.
• Degrease with Coo-Var Universal Degreaser
• Apply Teamac Zinc Phosphate Primer to bare metal and allow to dry fully
• Ensure surface is clean, dry, and free from contamination

Previously Painted Floors:
• Ensure existing coating is sound and well-adhered
• Remove any flaking or peeling paint
• Lightly sand or de-gloss the surface to improve adhesion
• Clean thoroughly to remove dust and grease
• Prime with SPO Floor Paint if existing coating is incompatible

Application:

• Stir paint thoroughly before use and occasionally during application to keep aggregates suspended
• Apply in temperatures between 10°C and 25°C for optimal drying
• Use a good-quality brush or short/medium pile roller
• DO NOT THIN – Apply as supplied to maintain anti-slip aggregate suspension
• Apply first coat evenly, working paint well into the surface
• Aim for a wet film thickness of approximately 150–250 µm (this will dry to 60–100 µm)
• Allow to dry for minimum 16 hours (overnight) before applying second coat
• Apply second coat in the same manner for optimal slip resistance and durability
• Avoid application in damp, humid, or freezing conditions
• Ensure good ventilation during application and drying (solvent-based product)

Drying & Curing Times (at 20°C):

• Touch dry: 6 hours
• Hard dry: 24 hours
• Recoat time: Minimum 16 hours (overnight recommended)
• Light foot traffic: 24 hours
• Full cure: 5–7 days (avoid heavy traffic or chemical exposure during this period)

*Drying times may be extended in cooler temperatures or high humidity. Do not apply if rain is expected within 24 hours for exterior applications.

• Finish / Texture: Aggregated, anti-slip
• Base: Solvent-based alkyd
• Available Colours: Blue, Red, Green, Black, Grey, White, Light Grey, Yellow
• Pack Sizes: 1 L, 5 L
• Coverage: 6 – 10 m²/L @ 60–100 µm DFT
• Drying Times @ 20 °C: Touch dry 6 hrs; Hard dry 24 hrs; Full hardness 5 – 7 days
• Re-coat Interval: Minimum 16 hrs / overnight
• Minimum Application Temp.: ≥ 5 °C (good painting practice)
• VOC Content: 343 g/L
• Flash Point: 32 °C (closed cup)
• Application Method: Brush or short/medium roller; do not thin
• Surface Suitability: Concrete, wood, metal, GRP, steps, ramps, machinery areas
• Volume Solids: 60 %
• Wet Film Thickness: 100 – 150 µm
• Dry Film Thickness: 60 – 100 µm

Need detailed specs or prep guidance? Chat with our experts now and paint tomorrow!

Q: What is SPO Anti-Slip Floor Paint and how does it work?

A: SPO Anti-Slip Floor Paint is a solvent-based, heavily aggregated coating that creates a textured, slip-resistant surface on concrete, wood, metal, and GRP floors. The formula contains anti-slip aggregates that are suspended in a high-solids alkyd resin (60% volume solids). When applied, these aggregates create a textured finish (60–100 µm DFT) that provides instant grip underfoot, reducing slip risk in wet, oily, or high-traffic areas. The solvent-based formula provides excellent adhesion and durability.

Q: Where can I use SPO Anti-Slip Floor Paint?

A: Use it on interior and exterior floors, steps, ramps, loading bays, platforms, walkways, wet areas, shower rooms, machinery zones, factory floors, warehouse walkways, commercial kitchens, and any location where slip prevention is critical. Suitable for concrete, wood, metal (primed), and GRP surfaces. Ideal for areas exposed to moisture, spillages, oil, grease, or heavy foot traffic.

Q: Do I need to prime before applying SPO Anti-Slip Floor Paint?

A: Yes, priming is essential for optimal adhesion and performance. Use thinned SPO Floor Paint (2 coats) as a primer for concrete, SPO General Purpose Stain Block Primer for wood surfaces. Use Teamac Zinc Phosphate Primer for bare metal surfaces. Priming ensures proper adhesion, prevents peeling, and extends the life of the anti-slip topcoat. Do not apply directly to bare, unsealed surfaces.

Q: Can I thin SPO Anti-Slip Floor Paint?

A: No, do not thin this product. The anti-slip aggregates are carefully suspended in the formula, and thinning will cause them to settle and reduce the slip-resistant properties. Apply as supplied with a brush or short/medium pile roller. Stir thoroughly before use and occasionally during application to keep aggregates suspended.

Q: How do I apply SPO Anti-Slip Floor Paint?

A: Apply by brush or short/medium pile roller in temperatures between 10°C and 25°C. Stir thoroughly before use and occasionally during application. Ensure the surface is clean, dry, and properly primed (see How to Apply Section). Apply first coat evenly, allow to dry for minimum 16 hours (overnight), then apply second coat. Two coats provide optimal slip resistance and durability. Coverage is approximately 6–10 m² per litre per coat. Do not thin.

Q: How long does SPO Anti-Slip Floor Paint take to dry before re-coating?

A: At 20°C, SPO Anti-Slip Floor Paint is touch dry in 6 hours and hard dry in 24 hours. For re-coating, wait a minimum of 16 hours (overnight is recommended). Light foot traffic is safe after 24 hours, but allow 5–7 days for full cure before subjecting the floor to heavy traffic. Drying times may be longer in cooler temperatures or high humidity.

Q: What colours are available for SPO Anti-Slip Floor Paint?

A: SPO Anti-Slip Floor Paint is available in 8 colours: Black, White, Tile Red, Forest Green, Light Grey, Grey, Yellow, and Blue. These colours allow you to colour-code safety zones, match corporate branding, or create visual demarcation for walkways and hazard areas. All colours provide the same anti-slip performance.

Q: Can I use SPO Anti-Slip Floor Paint on metal surfaces?

A: Yes, but bare metal must be primed first with Teamac Zinc Phosphate Primer for proper adhesion and corrosion protection. Once primed, apply SPO Anti-Slip Floor Paint as normal. This is ideal for metal steps, platforms, loading bays, or machinery areas where slip prevention is critical. The textured finish provides grip on metal surfaces exposed to moisture, oil, or grease.

Q: How much coverage can I expect from SPO Anti-Slip Floor Paint?

A: SPO Anti-Slip Floor Paint provides approximately 6–10 m² per litre per coat, depending on surface porosity and texture. A 1L tin covers 6–10 m², a 2.5L tin covers 15–25 m², and a 5L tin covers 30–50 m². For a typical 20 m² walkway with 2 coats, you would need approximately 4–6.7 litres total. The heavily aggregated formula may reduce coverage compared to standard floor paints. We recommend ordering 10–15% extra for surface variation and touch-ups.

Q: Is SPO Anti-Slip Floor Paint suitable for exterior use?

A: Yes, SPO Anti-Slip Floor Paint is suitable for both interior and exterior use. The solvent-based alkyd formula provides excellent weather resistance and can withstand outdoor conditions including rain, frost, and UV exposure. Ideal for external steps, ramps, walkways, loading bays, and platforms. Ensure surface is dry and avoid application if rain is expected within 24 hours.

Q: Does SPO Anti-Slip Floor Paint comply with health and safety regulations?

A: Yes, SPO Anti-Slip Floor Paint provides slip-resistant surfaces that help comply with health and safety regulations for slip prevention in commercial, industrial, and public spaces. The textured finish reduces slip risk and helps prevent accidents, insurance claims, and liability costs. However, always consult relevant health and safety regulations for your specific application and ensure proper surface preparation and application for optimal performance.

Safety data sheet
Technical data sheet

Free Delivery on Orders Over £75: Stock up on everything you need in one go and complete the job properly.

• Coo-Var Oil Remover: Effectively removes oil contamination from concrete surfaces, ensuring coatings can bond correctly.
• Coo-Var Acid Etch: Chemically prepares concrete by removing laitance, salts, and surface dust while creating a strong key for improved adhesion.
• Coo-Var Degreaser: Ideal for degreasing metal surfaces prior to priming, helping prevent coating failure.
• SPO Floor Paint: Used as a primer coat on concrete when thinned by 10%, allowing deeper penetration and improved adhesion of the anti-slip finish.
• SPO General Purpose Primer: Primes wood surfaces to provide a stable base before applying the anti-slip topcoat.
• Teamac Zinc Phosphate Primer: Primes metal surfaces while offering corrosion protection prior to application of the anti-slip floor paint.
• Application Tools: Brushes, rollers, trays, and extension poles for smooth, even, and efficient coverage.

These products are commonly combined for best long-term results.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.