Coo-Var Floor Paint - Hard-Wearing Single Pack Floor Paint for Concrete, Wood & Metal

• Protect concrete, wood, and metal floors with hard-wearing semi-gloss single pack floor paint

• Use self-priming floor paint that eliminates separate primer on concrete, wood, and GRP surfaces

• Apply cost-effective floor protection for garages, workshops, warehouses, and light industrial areas

• Achieve easy-clean semi-gloss finish that sheds dirt and dust for reduced maintenance

• Use solvent-based floor paint for superior adhesion and durability compared to water-based alternatives

• Choose from 9 standard colours or 2000+ custom RAL, BS, and NCS tints for unlimited colour options

• Apply interior and exterior floor paint suitable for UK weather conditions

• Use professional-grade floor paint from Coo-Var (115+ years British coating expertise)

• Apply to surfaces with active oil or grease contamination (clean with Oil Remover or Universal Degreaser first)

• Use on wet, damp, or saturated surfaces (surface must be dry before application)

• Apply to smooth concrete without preparation (chemically abrade with Acid Etch or mechanically abrade for optimal adhesion)

• Apply to bare metal without priming (prime with Teamac Zinc Phosphate Primer first for optimal adhesion and rust prevention)

• Use on floors with heavy vehicle traffic (forklifts, cars, trucks—use 2-pack epoxy for heavy traffic)

• Apply in temperatures below 7°C (minimum application temperature 7°C for proper cure)

Coo-Var Floor Paint is a hard-wearing semi-gloss single pack floor paint designed for concrete, wood, and metal floors in residential, commercial, and light industrial environments. Unlike basic floor paints that wear quickly, this solvent-based synthetic resin formulation provides durable protection whilst remaining self-priming on many surfaces for easy application.

Developed by Coo-Var with over 115 years of British coating expertise, Floor Paint is the cost-effective solution for garage floors, workshop floors, warehouse floors, and light industrial areas requiring hard-wearing protection. The semi-gloss finish provides durable protection whilst remaining easy to clean with regular sweeping or mopping.

When floors in garages, workshops, and warehouses are exposed to foot traffic, light vehicles, and everyday wear, basic floor paints fail to provide adequate protection, leading to premature wear and costly repainting. Coo-Var Floor Paint's hard-wearing formulation provides long-lasting protection whilst the self-priming properties eliminate separate primer application on many surfaces.

The solvent-based formulation provides superior adhesion and durability compared to water-based alternatives. The semi-gloss finish is easy to clean, shedding dirt and dust for reduced maintenance. Coverage of 9–11 m² per litre makes it cost-effective for large floor areas. Available in 9 standard colours plus 2000+ custom RAL, BS, and NCS tints.

Suitable for concrete, wood, metal (primed), and GRP floors and walls in garages, workshops, warehouses, factories, and light industrial environments. Not suitable for asphalt or thermoplastic tiles. Prime metal with Teamac Zinc Phosphate Primer. Prepare concrete with Acid Etch and clean with Oil Remover or Universal Degreaser for optimal adhesion.

Manufactured in the UK to rigorous standards and trusted by homeowners, property managers, facilities managers, and professional decorators for cost-effective hard-wearing floor protection.

Key Benefits:

• Hard-Wearing Protection – Solvent-based synthetic resin provides durable protection against foot traffic, light vehicles, and everyday wear. Extends floor lifespan and reduces repainting frequency. Ideal for garages, workshops, and light industrial floors.

• Self-Priming on Many Surfaces – Self-priming on concrete, wood, and GRP eliminates separate primer application. Saves time and reduces costs. Simplifies application for DIY users and professionals.

• Semi-Gloss Easy-Clean Finish – Semi-gloss finish is easy to clean with regular sweeping or mopping. Sheds dirt and dust for reduced maintenance. Keeps floors looking professional with minimal effort.

• Multi-Surface Compatibility – Suitable for concrete, wood, primed metal, and GRP floors and walls. Versatile solution for mixed-surface environments. Interior and exterior use.

• Cost-Effective Coverage – Coverage of 9–11 m² per litre makes it economical for large floor areas. Single pack simplicity eliminates mixing. Affordable protection for budget-conscious projects.

• 9 Colours + Custom Tints – Available in 9 standard colours (White, Forest Green, Black, Light Grey, Tile Red, Flint Grey, Dark Grey, Yellow, Steel Blue). 2000+ custom RAL, BS, and NCS tints available for unlimited colour options.

• Interior & Exterior Use – Suitable for interior and exterior floors. Weather-resistant formulation withstands UK outdoor conditions. Versatile protection for all floor environments.

• Coo-Var Heritage – Over 115 years of British coating expertise. Trusted by homeowners, property managers, and professional decorators for cost-effective hard-wearing floor protection.

Protect floors with hard-wearing single pack floor paint. Add to basket now and extend floor lifespan.

Coo-Var Floor Paint is the perfect choice for hard-wearing floor protection in a variety of residential, commercial, and light industrial applications:

• Garage Floors – Ideal for garage floors requiring cost-effective protection against foot traffic and light vehicles. Self-priming on concrete eliminates separate primer. Semi-gloss finish is easy to clean. Available in 9 colours for personalization.

• Workshop Floors – Great for workshop floors with light foot traffic and tool use. Hard-wearing formulation withstands daily wear. Easy-clean semi-gloss finish sheds dust and dirt. Cost-effective protection for professional and DIY workshops.

• Warehouse & Factory Floors – Perfect for warehouse and factory floors with light foot traffic. Durable protection extends floor lifespan. Self-priming properties simplify application. Available in multiple colours for zone marking and safety areas.

• Concrete & Cement Floors – Suitable for concrete and cement floors in residential, commercial, and light industrial environments. Self-priming on concrete saves time. Solvent-based formulation provides superior adhesion. Long-lasting protection for high-use areas.

• Wood Floors & Platforms – A must-have for wood floors and platforms requiring hard-wearing protection. Self-priming on wood eliminates separate primer. Semi-gloss finish protects wood from wear and moisture. Ideal for workshops, storage areas, and platforms.

• Interior & Exterior Floors – Ideal for interior and exterior floors requiring weather-resistant protection. Suitable for UK outdoor conditions. Versatile solution for mixed indoor/outdoor environments. Cost-effective protection for all floor types.

If you need further advice on using Coo-Var Floor Paint for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 9–11 m² per litre @ 50–60 µm DFT

Per Tin Coverage (Single Coat):
• 1 litre: Covers approx. 9–11 m²
• 2.5 litres: Covers approx. 22.5–27.5 m²
• 5 litres: Covers approx. 45–55 m²

Recommended Application: 2 coats for optimal protection and durability

Example Calculations:

Small Garage or Workshop (20 m² floor area):
• Total area: 20 m² × 2 coats = 40 m² coverage needed
• Paint required: Approx. 4.4 litres total
• Recommended: One 5L tin (£92.00) will cover with material left over

Medium Warehouse or Factory (50 m² floor area):
• Total area: 50 m² × 2 coats = 100 m² coverage needed
• Paint required: Approx. 11 litres total
• Recommended: Three 5L tins (£276.00)

Large Industrial Floor (100 m² floor area):
• Total area: 100 m² × 2 coats = 200 m² coverage needed
• Paint required: Approx. 22 litres total
• Recommended: Five 5L tins (£460.00)

Coverage may vary depending on surface porosity and texture. Porous or rough surfaces may require more paint. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and touch-ups.

Important: Apply 2 coats for optimal protection. Allow minimum 16 hours/overnight between coats. Full cure 5–7 days before heavy traffic.

Recommended System Products:
• Coo-Var Oil Remover for eliminating ingrained oils
• Coo-Var Universal Degreaser for cutting through grease
• Coo-Var Acid Etch for chemically preparing concrete
• SPO Paint Thinners for priming first coat
• Teamac Zinc Phosphate Primer for priming metal surfaces
• Application Tools (brushes, rollers, extension poles)

Surface Preparation:

Concrete Floors:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, dirt, and contamination
• For ingrained oils, use Coo-Var Oil Remover to eliminate oils that prevent paint adhesion
• Repair cracks, holes, and damaged areas with suitable concrete repair compound
• For smooth or power-floated concrete, chemically abrade with Coo-Var Acid Etch to create a key for optimal adhesion
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Wood Floors:
• Clean surface to remove dirt, dust, grease, and contamination
• Sand surface lightly to create a key and remove any existing finish
• Repair damaged areas with suitable wood filler and allow to dry
• Ensure surface is clean, dry, and free from loose material
• Surface must be completely dry before application

Metal Floors:
• Clean surface with Coo-Var Universal Degreaser to remove oil, grease, and contamination
• Remove rust with wire brush or rust remover
• Degrease metal surface thoroughly
• Prime bare metal with Teamac Zinc Phosphate Primer and allow to dry completely
• For previously painted metal, ensure coating is sound and well-adhered
• Surface must be clean, dry, and rust-free

GRP Floors:
• Clean surface thoroughly to remove dirt, grease, and contamination
• Lightly abrade surface to improve adhesion
• Ensure surface is clean, dry, and free from loose material

Application:

• Stir paint thoroughly before use and occasionally during application
• Apply in temperatures above 7°C for optimal drying
• Ensure good ventilation during application and drying (solvent-based product)
• Use Application Tools (brushes, rollers) suitable for solvent-based paints

For bare concrete and wood thin the first coat 10% with SPO Thinners.

Brush Application:
• Use good-quality brush suitable for solvent-based paints
• Apply evenly, working paint well into the surface
• Brush out to avoid runs and sags
• Coverage: Approx. 9–11 m² per litre per coat

Roller Application:
• Use short-pile roller suitable for solvent-based paints
• Apply evenly with consistent pressure
• Avoid over-rolling which can cause bubbles
• Coverage: Approx. 9–11 m² per litre per coat

• Apply first coat evenly across entire floor surface
• Allow to dry for minimum 16 hours or overnight before applying second coat
• Apply second coat for optimal protection and durability
• Allow final coat to cure for 5–7 days before exposing to heavy traffic
• Avoid application in damp, humid, or freezing conditions
• Clean tools immediately after use with SPO Paint Thinners (Thinners 14) or white spirit

Drying & Curing Times (at 20°C):

• Touch dry: 4 hours
• Hard dry: 12 hours
• Recoat time: Minimum 16 hours or overnight
• Full cure: 5–7 days

Drying times may be extended in cooler temperatures or high humidity.

Recommended System Products:
• Coo-Var Oil Remover – Eliminate ingrained oils
• Coo-Var Universal Degreaser – Cut through grease
• Coo-Var Acid Etch – Chemically prepare concrete
• SPO Paint Thinners – Improve flow on first coat
• Teamac Zinc Phosphate Primer – Prime metal surfaces
• Application Tools – Brushes, rollers, extension poles

What is Coo-Var Floor Paint and when should I use it?

Coo-Var Floor Paint is a hard-wearing semi-gloss single pack floor paint for concrete, wood, and metal floors in residential, commercial, and light industrial environments. Use it when you need cost-effective floor protection for garages, workshops, warehouses, and light industrial areas.

Is Coo-Var Floor Paint self-priming?

Yes, Coo-Var Floor Paint is self-priming on concrete, wood, and GRP surfaces. For Wood and concrete thinb the first coat 10% with SPO thinners. This eliminates the need for separate primer application and saves time. For metal surfaces, prime with Teamac Zinc Phosphate Primer for optimal adhesion and rust prevention.

Can I use Coo-Var Floor Paint outdoors?

Yes, Coo-Var Floor Paint is suitable for interior and exterior floors. The solvent-based formulation is weather-resistant and can withstand UK outdoor conditions. Ensure surface is dry before application and avoid application if rain is expected within 12 hours.

How many coats of Coo-Var Floor Paint do I need?

For optimal protection and durability, apply 2 coats. Allow minimum 16 hours or overnight between coats. The two-coat system provides complete coverage, maximum protection, and professional semi-gloss finish.

How long does Coo-Var Floor Paint take to dry?

Touch dry in 4 hours, hard dry in 12 hours at 20°C. Allow minimum 16 hours or overnight before recoating. Full cure for heavy traffic in 5–7 days. Drying times may be extended in cooler temperatures or high humidity.

What surfaces can I apply Coo-Var Floor Paint to?

Coo-Var Floor Paint is suitable for concrete, wood, primed metal, and GRP floors and walls. It is not suitable for asphalt or thermoplastic tiles. Prime metal with Teamac Zinc Phosphate Primer. Prepare concrete with Acid Etch for optimal adhesion.

What colours are available for Coo-Var Floor Paint?

Coo-Var Floor Paint is available in 9 standard colours: White, Forest Green, Black, Light Grey, Tile Red, Flint Grey, Dark Grey, Yellow, and Steel Blue. 2000+ custom RAL, BS, and NCS tints are available for unlimited colour options.

How much coverage can I expect from Coo-Var Floor Paint?

Coo-Var Floor Paint provides approximately 9–11 m² per litre per coat at 50–60 µm DFT. A 1L tin covers 9–11 m², a 2.5L tin covers 22.5–27.5 m², and a 5L tin covers 45–55 m². Coverage may vary depending on surface porosity. We recommend ordering 10–15% extra for surface variation and touch-ups.

Is Coo-Var Floor Paint suitable for heavy vehicle traffic?

No, Coo-Var Floor Paint is designed for light foot traffic and light vehicles only. It is not suitable for heavy vehicle traffic (forklifts, cars, trucks). For heavy vehicle traffic, use 2-pack epoxy floor paints like Coo-Var Profloor Plus.

How do I clean floors before applying Coo-Var Floor Paint?

Clean floors with Coo-Var Universal Degreaser to remove oil, grease, and contamination. For ingrained oils, use Coo-Var Oil Remover. For smooth concrete, chemically abrade with Coo-Var Acid Etch. Ensure surface is clean, dry, and free from loose material before application.

What products do I need to complete my floor protection system?

We recommend using Coo-Var Oil Remover for eliminating oils, Coo-Var Universal Degreaser for cutting through grease, Coo-Var Acid Etch for preparing concrete, SPO Paint Thinners for improving flow, Teamac Zinc Phosphate Primer for priming metal, and Application Tools (brushes, rollers, extension poles). This complete system ensures maximum adhesion and durability.

Safety data sheet
Technical data sheet

Complete Your Floor Protection System:

• Coo-Var Oil Remover – Eliminates ingrained oils and grease that prevent coatings from bonding, ensuring your floor paint adheres correctly from the very first coat

• Coo-Var Universal Degreaser – Rapidly cuts through oil, grease, and traffic film, leaving a spotless surface that helps your floor coating achieve maximum durability

• Coo-Var Acid Etch – Chemically prepares concrete and power-floated floors by opening the surface and creating a rough, porous key that paint can properly grip

• SPO Paint Thinners – Improves flow and workability of the first coat on concrete, masonry, and wood for optimal penetration

• Teamac Zinc Phosphate Primer – Provides a stable base and corrosion protection for metal surfaces before floor paint application

• Application Tools – High-quality brushes, rollers, and extension poles for smooth, efficient, and hassle-free application

Need help choosing the right products? Contact our experts via live chat for personalised advice!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.