Coo-Var Glocote Fluorescent Clear Protective Coat | Clear Gloss Sealer for Fluorescent Paint

• Protect Coo-Var Glocote Fluorescent Paint from weathering on exterior surfaces
• Prolong the colour retention and brightness of fluorescent safety markings and signage
• Apply a clear gloss protective coat as the final step in the Coo-Var Glocote Fluorescent Paint system
• Protect fluorescent markings on skips, bollards, barriers and outdoor equipment from the elements
• Apply a solvent-based clear coat by brush, roller or airless spray

• Coo-Var Glocote Fluorescent Paint has not been applied and fully dried first — the Protective Coat must be applied over fully dried Glocote Fluorescent Paint
• You require a water-based product — Glocote Protective is solvent-based and cleans up with Thinners 14
• You require a matt finish — the Protective Coat dries to a gloss finish

Coo-Var Glocote Protective is a specialist clear gloss coating formulated to protect the exterior performance and prolong the colour retention of Coo-Var Glocote Fluorescent Paint. Developed by Coo-Var — a British coatings manufacturer with over 115 years of heritage — it provides a clear glaze that protects Glocote Fluorescent Paint and other compatible products from weathering, extending the life of the fluorescent finish and maintaining colour brightness for longer.

Applied over fully dried Coo-Var Glocote Fluorescent Paint, the clear gloss coat provides a tough, protective film that resists weathering and surface damage. It is the recommended final step in the Coo-Var Glocote Fluorescent Paint system, particularly for exterior applications where the fluorescent paint is exposed to the elements.

The solvent-based formula cleans up with Thinners 14 and can be applied by brush, roller or airless spray. It is available in four sizes — 500ml, 1L, 2.5L and 5L — to suit projects of all scales.

The complete Coo-Var Glocote Fluorescent Paint system: Coo-Var Glocote Fluorescent Foundation → Coo-Var Glocote Fluorescent Paint (minimum 2 coats) → Coo-Var Glocote Fluorescent Clear Protective Coat.

Key Benefits

• Protects fluorescent paint from weathering — extends the exterior life of Glocote Fluorescent Paint
• Prolongs colour retention — clear gloss coat maintains fluorescent brightness for longer
• Clear gloss finish — enhances the appearance of the fluorescent paint surface
• Four sizes available — 500ml, 1L, 2.5L and 5L to suit projects of all scales
• Apply by brush, roller or airless spray — flexible application for projects of all types
• 115+ years of British expertise — trusted by safety professionals, contractors and facilities managers across the UK

Order before midday for next-day UK delivery.

Coo-Var Glocote Fluorescent Clear Protective Coat is the recommended final step for all exterior Coo-Var Glocote Fluorescent Paint applications:

• Skip & Waste Container Markings — Apply over Glocote Fluorescent Paint on skip bodies and waste containers to protect the fluorescent colour from weathering and extend the life of the marking. Particularly important for skips that are exposed to the elements year-round.

• Safety Bollards & Barriers — Apply over fluorescent safety bollards, barriers and road furniture to protect the fluorescent colour from weathering, cleaning and physical contact. The gloss finish is easy to clean and maintains the high-visibility appearance.

• Construction Site Hoarding & Signage — Apply over fluorescent hoarding, site signage and safety boards to protect the fluorescent colour from weathering during the project. The protective coat significantly extends the life of the fluorescent finish on exterior timber and metal.

• Bridges & Structural Steelwork — Apply over fluorescent markings on bridges, structural steelwork and infrastructure to protect against weathering and extend the service life of the safety markings.

• Marine & Watercraft — Apply over fluorescent markings on fishing floats, buoys and small watercraft to protect against saltwater, UV and weathering. The protective coat is essential for maintaining fluorescent brightness in marine environments.

• Exterior Line Markings & Signage — Apply over exterior fluorescent line markings and signage to protect against weathering and foot traffic. The gloss finish is durable and easy to clean.

If you need personalised advice on the Glocote system or coverage for your specific project, contact our experts via the live chat for tailored guidance.

Coverage: 14 m² per litre at 30 micron dry film thickness

Coverage per size

• 500ml: Covers approximately 7 m² per coat
• 1L: Covers approximately 14 m² per coat
• 2.5L: Covers approximately 35 m² per coat
• 5L: Covers approximately 70 m² per coat

Recoat interval: 12 hours or overnight between coats.

Note: Apply over fully dried Coo-Var Glocote Fluorescent Paint only. The Glocote Fluorescent Paint must be fully hard dry before applying the Protective Coat.

Example calculations

• For skip markings of 10 m²: a 500ml tin will cover 1 coat; a 1L tin for 2 coats
• For a hoarding of 30 m²: a 2.5L tin will cover 1 coat
• For a large safety marking project of 60 m²: a 5L tin will cover 1 coat

For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and porosity.

The Complete Coo-Var Glocote Fluorescent Paint System

Step 1: Coo-Var Glocote Fluorescent Foundation — essential white base coat on all surfaces
Step 2: Coo-Var Glocote Fluorescent Paint — minimum 2 coats; allow 12 hours or overnight between coats
Step 3: Coo-Var Glocote Fluorescent Clear Protective Coat — final coat for weathering protection

Surface Preparation

• Coo-Var Glocote Fluorescent Paint must be fully applied and hard dry before applying the Protective Coat
• All surfaces must be clean, dry and free from contaminants
• Do not apply over wet or partially dried Glocote Fluorescent Paint

Application

1. Mix well before use
2. Apply by brush, roller or airless spray over the fully dried Glocote Fluorescent Paint
3. Apply evenly, ensuring full coverage of the fluorescent paint surface
4. Allow to dry — touch dry in 6 hours, hard dry in 24 hours
5. If a further coat is required, recoat after 12 hours or overnight
6. If thinning is required, thin with Thinners 14 at a maximum of 10%
7. Clean brushes, rollers and trays immediately after use with Thinners 14

Airless Spray: Nozzle size 0.013", nozzle pressure 1800–2000 psi. Thin with Thinners 14 at maximum 10% if required.

Drying Times (at 20°C)

• Touch dry: 6 hours
• Hard dry: 24 hours
• Full hardness: 5–7 days
• Recoat interval: 12 hours or overnight

Drying times will be longer in cold or humid conditions.

Important Notes

• Apply over fully dried Glocote Fluorescent Paint only
• Clean equipment with Thinners 14 immediately after use — do not allow to dry on equipment
• Do not apply in cold or humid conditions — low temperature and high humidity will adversely affect application and performance

Recommended System Products

Free delivery on orders over £75 — stock up on everything you need in one go and complete the job properly.

Coo-Var Glocote Fluorescent Foundation: Essential first step in the Glocote system — must be applied before Glocote Fluorescent Paint on all surfaces.

Coo-Var Glocote Fluorescent Paint: The fluorescent topcoat — apply a minimum of 2 coats over the Foundation before applying the Protective Coat.

Paint Brushes, Rollers & Paint Trays: Use a brush or roller for application. Clean with Thinners 14 immediately after use.

What is Coo-Var Glocote Fluorescent Clear Protective Coat used for?
It is used to protect the exterior performance and prolong the colour retention of Coo-Var Glocote Fluorescent Paint. It is the recommended final step in the Coo-Var Glocote Fluorescent Paint system.

What must I apply it over?
Coo-Var Glocote Fluorescent Paint only — fully dried. Do not apply over any other paint or surface.

What colour is it?
Clear — it dries to a gloss, transparent finish that does not obscure the fluorescent paint beneath.

What sizes are available?
500ml, 1L, 2.5L and 5L.

How much does it cover?
Coverage is approximately 14 m² per litre at 30 micron dry film thickness — approximately 7 m² per 500ml, 14 m² per 1L, 35 m² per 2.5L and 70 m² per 5L per coat.

How long between coats?
Recoat after 12 hours or overnight.

How long does it take to dry?
Touch dry in 6 hours at 20°C. Hard dry in 24 hours. Full hardness in 5–7 days.

Is it water-based?
No. Glocote Protective is solvent-based with a VOC content of 393 g/litre. Clean equipment with Thinners 14 immediately after use.

Can I thin it?
Yes. Thin with Thinners 14 at a maximum of 10%.

What do I clean my equipment with?
Clean brushes, rollers and trays immediately after use with Thinners 14.

Can it be applied by spray?
Yes. Apply by airless spray using a 0.013" nozzle at 1800–2000 psi. Thin with Thinners 14 at maximum 10% if required.

What is the complete Glocote system?
Step 1: Coo-Var Glocote Fluorescent Foundation → Step 2: Coo-Var Glocote Fluorescent Paint (minimum 2 coats) → Step 3: Coo-Var Glocote Fluorescent Clear Protective Coat.

Do you offer next-day delivery?
Yes. Order before midday for next-day delivery to mainland UK addresses. Contact us for delivery options to Scottish Highlands, Northern Ireland and other remote areas.

Safety data sheet
Technical data sheet

We recommend these system products to complete the Coo-Var Glocote Fluorescent Paint system. Free delivery on orders over £75

Coo-Var Glocote Fluorescent Foundation — essential first step in the Glocote system; must be applied before Glocote Fluorescent Paint on all surfaces

Coo-Var Glocote Fluorescent Paint — the fluorescent topcoat; apply a minimum of 2 coats over the Foundation before applying the Protective Coat

Paint Brushes, Rollers & Paint Trays — use a brush or roller for application; clean with Thinners 14 immediately after use

Not sure how many coats you need or how the full system works? Contact our experts via live chat for free, tailored advice.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.