Coo-Var Tennis Court Paint | Durable, Slip-Resistant Court Coating for Concrete, Tarmac & Asphalt

• Resurface and restore colour to a faded or tired concrete or tarmac tennis court
• Improve grip and safety on a court surface — independently slip tested PTV 68 Dry and 58 Wet (both Low Risk)
• Complete the job quickly — touch dry in 1 hour, second coat the same day
• Use a water-based, low-VOC product that is easy to apply and clean up with water
• Match LTA colour guidelines or club branding with a choice of five colours
• Avoid the cost and disruption of full court resurfacing

• The court surface is unstable, crumbling or heavily cracked — the surface must be sound before painting
• The surface or air temperature is at or below 7°C during painting and drying
• You require a colour outside the available range (Black, Tile Red, White, Green and Wimbledon Green only)
• The surface has not been properly cleaned and degreased — contamination will cause adhesion failure
• You are using airless spray equipment not rated for abrasive coatings — the aggregate can be abrasive to spray tips; check manufacturer recommendations before use

Coo-Var Tennis Court Paint is a water-based, pre-aggregated court coating formulated to add colour, restore grip and protect concrete, tarmac and asphalt tennis court surfaces. Developed by Coo-Var — a British coatings manufacturer with over 115 years of heritage — it delivers a durable, slip-resistant matt finish that transforms tired courts without the disruption and cost of full resurfacing.

The very fine aggregate within the formulation provides a textured, non-slip surface that has been independently tested to PTV 68 Dry (Low Risk) and 58 Wet (Low Risk) — giving clubs, facilities managers and contractors confidence that the finished surface is safe underfoot in all weathers. The water-based formula keeps VOC content to a maximum of 140 g/litre, making it a lower-odour, more environmentally considerate choice than solvent-based alternatives, and tools clean up with water.

Available in Black, Tile Red, White, Green and Wimbledon Green in a 5L tin, Coo-Var Tennis Court Paint gives clubs and facilities the flexibility to meet LTA colour guidelines or create a distinctive court finish. It can be applied by brush, short-pile roller or airless spray, and touch dries in just 1 hour, allowing a second coat the same day.

Key Benefits

• Slip-resistant pre-aggregated finish — independently tested PTV 68 Dry and 58 Wet (both Low Risk)
• Water-based, low VOC — max 140 g/litre, non-flammable, easy to apply and clean up
• Touch dry in 1 hour — second coat the same day, court back in use fast
• No full resurfacing required — rejuvenates existing concrete, tarmac and asphalt at a fraction of the cost
• Five colours available — Black, Tile Red, White, Green and Wimbledon Green
• Durable matt finish — full hardness achieved in 5–7 days for long-lasting performance
• 115+ years of British expertise — trusted by clubs, contractors and facilities managers across the UK

Order before midday for next-day UK delivery — resurface your court this weekend.

Coo-Var Tennis Court Paint is an excellent choice for resurfacing, protecting and rejuvenating a wide range of outdoor court surfaces and settings:

• Tennis Clubs & Leisure Centres — Resurface club and leisure facility courts with a durable, slip-resistant finish that meets LTA colour guidelines. Available in Green, Wimbledon Green, Tile Red, Black and White. Touch dry in 1 hour and second coat the same day, minimising court downtime.

• Schools, Colleges & Universities — Paint school and college tennis courts, netball courts and multi-use games areas with a safe, slip-tested surface coating. PTV 68 Dry and 58 Wet (both Low Risk) provides confidence for PE lessons and student use in all weathers.

• Private & Residential Courts — Transform a tired private court at a fraction of the cost of professional resurfacing. Two coats over a weekend and the court is ready for play, with a finish that lasts season after season.

• Multi-Use Games Areas (MUGAs) — Apply to MUGAs used for tennis, netball, basketball and five-a-side. The pre-aggregated, slip-resistant finish is suitable for multi-sport use on concrete and tarmac surfaces.

• Local Authority & Public Courts — Maintain and rejuvenate public tennis courts and recreational court surfaces. Water-based formula allows application with minimal fumes in public settings, and the durable finish reduces the frequency of repainting.

• Court Renovation & Resurfacing Projects — A cost-effective alternative to full court reconstruction for facilities managers and contractors. Covers existing concrete and tarmac in one application cycle without the disruption and cost of excavation or relaying.

If you need personalised advice on application methods, surface preparation, or colour selection, contact our experts via the live chat for tailored guidance.

Coverage: 5–9 m² per litre at 35 micron dry film thickness (applied by brush or roller)

Coverage per size

• 5L tin: Covers approximately 25–45 m² per coat on a smooth, prepared surface

Recommended coats

• Minimum 2 coats recommended for full colour depth, opacity and durability
• First coat on porous or bare concrete surfaces should be thinned 5% with clean water to act as a primer coat
• Second and subsequent coats applied direct from the tin

Example calculations

• A standard singles tennis court is approximately 195 m² (full court including run-offs approximately 260 m²)
• For a singles court of 195 m², you will need approximately 4–5 x 5L tins per coat depending on surface porosity
• For 2 coats on a singles court, you will need approximately 8–10 x 5L tins

• For a doubles court of approximately 260 m², you will need approximately 6–7 x 5L tins per coat
• For 2 coats on a doubles court, you will need approximately 12–14 x 5L tins

• For a half court or MUGA section of approximately 100 m², you will need approximately 2–3 x 5L tins per coat

Practical coverage may be lower depending on surface porosity, roughness and application method. Rough or porous tarmac and concrete will absorb more paint than a smooth or previously painted surface. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation.

Surface Preparation

All Surfaces
• Surfaces must be sound, clean and free from contaminants including oil, grease, dirt, moss, algae and loose material
• Do not apply if the surface or air temperature is at or below 7°C during painting or drying
• Mix the paint well before use

Concrete
• All bare concrete surfaces should be abraded or treated with Coo-Var Acid Etch to provide a good key
• After abrading or etching, apply a first coat thinned 5% with clean water before applying full coats
• Newly laid concrete should be left to cure before painting — allow 1 month per 3cm of slab thickness
• Very porous concrete surfaces should also receive a first coat thinned 5% with clean water

Tarmac and Asphalt
• Ensure the surface is stable, sound and free from contaminants
• Remove any moss, algae or organic growth before painting

Existing Painted Surfaces
• Clean, degrease and abrade to ensure an adequate key
• Remove all loose and flaking material and treat bare areas as new substrate

Application

1. Mix the paint thoroughly before use and periodically during application
2. Apply by brush, short-pile roller or airless spray (nozzle size 0.021", pressure 1000–1300 psi)
3. Note: the aggregate in this product can be abrasive to spray equipment — check your spray tip manufacturer's recommendations before use
4. Apply the first coat — on porous or bare concrete surfaces, thin 5% with clean water; on other surfaces apply direct
5. Allow a minimum of 6 hours between coats
6. Apply a minimum of 2 coats for full colour depth and durability
7. Clean tools immediately after use with clean water

Drying Times (at 20°C)

• Touch dry: 1 hour
• Hard dry: 4 hours
• Full hardness: 5–7 days

Drying times will be longer in cold or humid conditions. Do not apply if temperature will be at or below 7°C during painting or drying.

Important Notes

• Exterior use on stable asphalt, concrete and tarmac only
• Do not apply to unstable, crumbling or heavily cracked surfaces
• Minimum 2 coats required for full performance
• Full hardness is achieved in 5–7 days — avoid play during this period
• This product is non-flammable

Recommended System Products

Coo-Var Universal Degreaser: Degrease concrete and tarmac court surfaces contaminated with oil or grease before applying Tennis Court Paint to ensure proper adhesion and long-term durability.

Coo-Var Acid Etch: Use on bare or smooth concrete surfaces to provide a mechanical key for the paint prior to application. Required on power-floated or granolithic concrete.

Coo-Var Line Marking Paint: Apply crisp, high-visibility court lines over the finished surface coating in White or Yellow. Compatible with Tennis Court Paint on concrete and tarmac.

Paint Brushes, Rollers & Frames: Use suitable brushes or short-pile rollers for standard application, or airless spray equipment rated for abrasive coatings for full court resurfacing.

These products are commonly combined for best long-term results.

What surfaces can Coo-Var Tennis Court Paint be applied to?
It is suitable for asphalt, concrete and tarmac tennis courts. The surface must be sound, clean and free from oil, grease, moss and loose material. It is not suitable for unstable, crumbling or heavily cracked surfaces.

Do I need a primer?
Not a separate primer product. On porous or bare concrete surfaces, the first coat should be thinned 5% with clean water to act as a primer coat. Bare concrete must also be abraded or treated with Coo-Var Acid Etch before painting.

What colours are available?
Black, Tile Red, White, Green and Wimbledon Green — all available in a 5L tin.

What pack size is available?
Coo-Var Tennis Court Paint is available in a 5L tin.

How many coats do I need?
A minimum of 2 coats is recommended for full colour depth and durability. On porous or bare concrete, the first coat should be thinned 5% with clean water.

How long do I need to wait between coats?
Allow a minimum of 6 hours between coats at 20°C. Drying times will be longer in cold or humid conditions.

How long before the court can be used after painting?
The paint is touch dry in 1 hour and hard dry in 4 hours at 20°C. Full hardness is achieved in 5–7 days — avoid play during this period to allow the surface to fully cure.

How much does a 5L tin cover?
A 5L tin covers approximately 25–45 m² per coat at 35 micron dry film thickness on a smooth, prepared surface. A standard singles court (approximately 195 m²) will require approximately 4–5 x 5L tins per coat. Coverage will be lower on rough or porous surfaces.

Can I apply it with a sprayer?
Yes, using airless spray equipment with a 0.021" nozzle at 1000–1300 psi. Note that the aggregate in this product can be abrasive to spray tips — check your equipment manufacturer's recommendations before use.

Is it slip resistant?
Yes. Coo-Var Tennis Court Paint has been independently tested and achieved a PTV of 68 Dry (Low Risk) and 58 Wet (Low Risk). A site assessment is recommended to determine actual slip risk in your specific environment.

What temperature do I need to apply it?
Do not apply if the surface or air temperature is at or below 7°C during painting or drying. Low temperature and high humidity will adversely affect application, drying and performance.

How do I prepare new concrete?
New concrete should be left to cure before painting — allow 1 month per 3cm of slab thickness. After curing, abrade or treat with Coo-Var Acid Etch, then apply a first coat thinned 5% with clean water before applying full coats.

Can I apply line markings over the top?
Yes. Once the surface coat is fully hard (5–7 days), apply Coo-Var Line Marking Paint for crisp, high-visibility court lines. White and Yellow are the most commonly used colours for court markings.

How do I clean my tools?
Clean brushes, rollers and spray equipment immediately after use with clean water. Do not allow the paint to dry on tools.

Do you offer next-day delivery?
Yes. Order before midday for next-day delivery to mainland UK addresses. Contact us for delivery options to Scottish Highlands, Northern Ireland and other remote areas.

Safety data sheet
Technical data sheet

Free delivery on orders over £75 — stock up on everything you need in one go and complete the job properly.

• Coo-Var Line Marking Paint — apply crisp court lines over the finished surface coating in White or Yellow
• Coo-Var Oil Remover— essential surface preparation for oil or grease contaminated concrete and tarmac before applying Tennis Court Paint
• Coo-Var Acid Etch — chemical etching for smooth, power-floated or bare concrete surfaces prior to application
• Paint Brushes, Rollers & Frames — application tools for court resurfacing projects

These products are commonly combined for best long-term results.

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.