Coo-Var Profloor Floor Paint | Two-Pack Epoxy Floor Paint

• Finish / Texture: Off-gloss
• Base: Water-based two-pack epoxy resin
• Available Colours: Tile Red, Grey, Green, Safety Yellow, Safety Red, Black, White + custom colours to order
• Pack Sizes: 5 kg mixed unit
• Coverage: 6–10 m² / kg (approx. 30–50 m² per 5 kg)
• Drying Times @ 20 °C: Touch dry 4 h; hard dry 8–12 h; full cure 5–7 days
• Re-coat Interval: Min. 16 h; max. 72 h @ 20 °C
• Minimum Application Temp.: 10 °C
• VOC Content: <10 g/L
• Flash Point: Non-flammable
• Application Method: Brush or short-pile roller (water clean-up)
• Surface Suitability: Concrete, wood, masonry, asphalt, tarmac, stable existing paint, walls
• Volume Solids: 55–85 %
• Wet Film Thickness (WFT): 100 µm
• Dry Film Thickness (DFT): 35–70 µm
• Pot Life @ 20 °C: 2–4 h

Need specifics on coverage or drying times? Chat with our experts now and paint tomorrow!

The Coo-Var Profloor | Two-Pack Water-Based Epoxy Floor Paint is the ideal solution for creating strong, long-lasting surfaces in various demanding environments:

• Industrial & Automotive
  Perfect for factories, garages, and workshops that experience heavy forklift or vehicle traffic, ensuring a durable and chemical-resistant finish.
• Property Maintenance
  An excellent choice for landlords and facility managers renovating commercial units or shared spaces, offering a professional and low-odour application.
• Hospitality & Retail
  Great for back-of-house areas, storage rooms, and service corridors where a tough, easy-to-clean surface is essential to maintain operational efficiency.
• Leisure & Tourism
  Suitable for gyms, studios, or other active spaces that require a hard-wearing, slip-resistant coating for both indoor and outdoor areas.
• Home Improvement & DIY
  Ideal for homeowners seeking an industrial-grade floor paint for garages, workshops, or utility rooms, with the convenience of water-based cleanup and low odour.

If you need personalised advice on using Profloor for your specific project, contact our experts now via the live chat for tailored guidance!

• Surface Prep: Clean thoroughly, removing oil, grease, or old flaking paint. Repair cracks as needed.
• Mixing: Blend Part A and Part B according to the datasheet’s ratio. Stir thoroughly.
• Application: Apply evenly with a brush or short pile roller—avoid puddling or thick patches.
• Drying/Curing: Wait 16 hours before overcoating, Refer to TDA for full cure time before exposing to traffic.
• Maintenance: Sweep or mop as required. Reapply if signs of wear appear over time.

Looking for step-by-step instructions? Our experts are standing by—chat live now!

• “Great for our automotive workshop—minimal odour, dried fast, and the floor looks brilliant.” – John H.
• “Went over our existing floor paint with no issues. Very hard-wearing and easy to clean.” – Mark B.

Have you used Coo-Var Profloor? Leave your review or chat with us for more tips!

Free Delivery on Orders Over £75: Pick up everything you need in one go to qualify

• Specialist Floor Paints and Primers: Improve adhesion on porous or challenging substrates
• Degreasers & Cleaners: Prepare floors for optimal epoxy bonding
• Anti-Slip Additives: Enhance safety in wet or high-traffic Areas.
• Application Tools: Brushes, rollers, extension handles, and mixing paddles.

Want everything in one basket? Chat with us for recommended extras!

1. What is Coo-Var Profloor used for?

Coo-Var Profloor is a two-pack, water-based epoxy floor paint designed for heavy-duty protection in industrial and commercial settings. It resists wear from foot, forklift, and vehicle traffic while maintaining a durable, low-odour finish.

2. How does it differ from solvent-based epoxy floor paints?

Unlike solvent-based formulas, Profloor is water-based and solvent-free. This makes it more eco-friendly, low-odour, and easier to clean up, without sacrificing durability or chemical resistance.

3. Can I use this product on previously painted floors?

Yes, as long as the existing paint is stable, clean, and properly prepared. Ensure any loose or flaking areas are removed, and test adhesion in a small area before full application.

4. How do I apply Coo-Var Profloor?

Mix the two epoxy components as instructed, then apply using a brush or short pile roller. Ensure good ventilation and follow drying times carefully—Profloor is typically ready for a second coat in about 16 hours.

5. What surfaces can I use Profloor on?

This product is suitable for both interior and exterior surfaces, such as concrete, screeds, and stable existing coatings. Its versatility makes it ideal for warehouses, garages, workshops, and more.

6. Can I customise the colour?

Yes. Profloor is available in a wide range of RAL, BS, and NCS colours. A minimum order of 5 kg may apply for custom shades, offering over 2000 colour options for your project.

7. How can I ensure the best results?

Prepare the floor by cleaning and repairing any damage or cracks. Allow the first coat to dry for around 16 hours before applying the second coat. For specific project guidance or troubleshooting, contact our experts for tailored advice.

Need help with your epoxy flooring project?

For personalised recommendations or further assistance, contact our experts now via live chat—we’re here to help you achieve a durable, long-lasting floor!

Fast, Reliable & Flexible Delivery

Every order leaves our warehouse on a fully-tracked DX or FedEx service, so you can spend less time waiting and more time painting.

Delivery Options

• FREE Standard Delivery (orders £75+) – arrives in 2–3 working days
• Standard Delivery £7.95 – arrives in 2–3 working days
• Express Delivery £13.95 – next working day when you order before 12 am (Mon–Thur)
  Got a £75+ basket? Select “Express Upgrade” at checkout and only pay the difference.

Next-Day Despatch Promise

• Order before 12 am (Mon–Thurs) with express delivery → ships today & receive tomorrow.
• Order without express delivery → ships the next working day and receive the next working day after.
• Order Thursday without express delivery → ships Friday for Monday delivery.

We do not deliver on weekends & bank-holidays

What to Expect

• Upon purchasing, please provide a contact telephone number that the courier's can contact you on if they experience any issues.
• All orders usually require a signature upon delivery.
• If you are unlikely to be in during the day, consider having your order delivered to your place of work, or another business address where somebody will be able to accept and sign.

Outside UK Mainland?

Delivery prices shown cover UK Mainland addresses. If you’re ordering for the Highlands, Islands, Northern Ireland, or anywhere outside the mainland, just reach out—chat with us live, call 01482 222 421, or email info@specialistpaintsonline.co.uk—and we’ll give you a quick personalised quote.

Bottom line: order today, get it fast, track every mile, paint tomorrow.

Technical Data Sheet

Safety Data Sheets For Tile Red, Green, Safety
Yellow, Black and White Bases

Safety Data Sheet Clear base

Safety Data Sheet Green Hardener

Safety Data Sheet All Other Hardeners