Teamac Industrial Floor Paint | Heavy Duty Floor Paint

• Finish / Texture: Semi-gloss
• Base: Solvent-based alkyd, single pack
• Available Colours: White, Black, Tile Red, Light Grey, Flint Grey, Blue, Forest Green, Yellow
• Pack Sizes: 5 L (all colours), 20 L (Tile Red, Grey)
• Coverage: 13–15 m²/L @ 40 µm DFT
• Drying Times @ 20 °C: Touch dry 2 hrs; Hard dry 12 hrs; Full hardness 5–7 days
• Re-coat Interval: Minimum 16 hrs / overnight
• Minimum Application Temp.: 5 °C
• VOC Content: Max 391 g/L
• Flash Point: > 32 °C (closed cup)
• Application Method: Brush or roller; thin up to 10 % with Thinners 14; not recommended for spray
• Surface Suitability: Masonry, concrete, cement screed, wood, primed metal
• Volume Solids: 51–60 %
• Wet Film Thickness: 75 µm
• Dry Film Thickness: 40–45 µm

Need detailed specs or prep guidance? Chat with our experts now and paint tomorrow!

Teamac Industrial Floor Paint | Single-Pack Semi-Gloss Coating is an excellent choice for creating a robust, professional finish across a variety of high-traffic surfaces:

• Industrial & Automotive
  Ideal for factory floors, garages, and light industrial settings where a semi-gloss look combined with durability can handle moderate vehicle and foot traffic.
• Hospitality & Retail
  Great for storage rooms, staff corridors, or shop floors seeking a clean, low-maintenance surface that resists daily wear and tear.
• Leisure & Tourism
  Perfect for gyms, studios, or reception areas where a polished, semi-gloss finish enhances the visitor experience while offering easy cleaning.
• Property Maintenance
  A go-to solution for landlords and facility managers refurbishing common areas, commercial units, or communal flooring in need of a cost-effective, durable update.
• DIY & Home Improvement
  Suitable for homeowners upgrading garages, workshops, or utility spaces, giving them a semi-gloss, professional-quality floor with minimal fuss.

If you need personalised guidance on preparation or choosing the right primer, contact our experts now via the live chat for tailored advice!

• Surface Prep: Clean and degrease floors; if needed, patch cracks or holes. Prime concrete with 10% thinned paint or recommended primer.
• Application: Stir thoroughly. Apply evenly using a brush or short pile roller—avoid heavy pooling or streaks.
• Drying/Curing: Touch dry 2 hours, hard dry 12 hours and fully cured in 5-7 days.Wait ~16 hours before adding a second coat, refer to technical data sheet before exposing to normal use.
• Maintenance: Store leftover paint in sealed containers; wipe or mop floors gently to retain finish.
• Pro Tip: For higher durability, apply two coats, especially in areas with heavier traffic or potential spillage.

Need a step-by-step guide? Our experts are standing by—chat live now!

• “My workshop floor looks fantastic—smooth semi-gloss finish and easy cleaning!” – David B.
• “Used it in our garage. Great coverage, and it dried faster than expected.” – Rebecca T.

Have you used Teamac Industrial Floor Paint? Leave your review or chat with us for more tips!

Free Delivery on Orders Over £75: Stock up on everything you need in one go

• Floor Primers & Sealers: Prep floors for optimal paint adhesion, especially on porous concrete
• Cleaners & Degreasers: Remove grease, oil, or debris before painting
• Application Tools: Brushes, short pile rollers, extension poles for easy floor coverage

Ready to complete your kit? Chat with us for recommended extras!

1. What is Teamac Industrial Floor Paint used for?

Teamac Industrial Floor Paint is an oil-based coating designed to provide a semi-gloss, durable finish on a variety of surfaces—such as masonry, wood, cement, and concrete floors. It’s ideal for industrial or commercial environments needing a practical, easy-to-maintain solution.

2. Which surfaces can I apply it to?

This paint adheres well to properly prepared masonry, concrete, wood, and cement floors. For metal substrates, use a suitable metal primer first. Always ensure surfaces are clean, dry, and free from grease or loose materials before painting.

3. How do I apply Teamac Industrial Floor Paint?

You can apply it using a brush or short pile roller. For concrete floors, thin the first coat by about 10% with a compatible thinner (or the paint itself) to act as a primer/sealer. Allow adequate drying time before applying subsequent coats at full strength.

4. How long does it take to dry before recoating?

Under normal conditions, you can typically recoat in around 16 hours. Factors like temperature, humidity, and the thickness of your application may affect drying times, so adjust as necessary. The product is usually touch dry in 2 hours, hard dry in 12 hours and fully cured in 5-7 days.

5. Do I need a separate primer?

For most concrete floors, thinning the first coat by 10% often eliminates the need for a separate primer. However, if you’re painting metal or heavily worn wood, use a primer specifically designed for those materials. Consult our experts for tailored advice.

6. How durable is this coating under industrial conditions?

Teamac Industrial Floor Paint offers robust protection against foot traffic, light chemical spills, and general abrasions. It’s well-suited for industrial or commercial spaces needing a balance of durability and a professional appearance.

7. What coverage can I expect?

Coverage is approximately 13–15 m² per litre, though 14 m² is a good benchmark under typical conditions. Surface porosity and texture can influence the final coverage rate.

8. What colours are available?

Standard colours include White, Black, Tile Red, Light Grey, Flint Grey, Blue, Forest Green, and Yellow. For more specific shades, speak to our experts to see if custom colour options are possible.

Need personalised advice on prepping or painting your floors?

For tailored guidance or further information, contact our experts now via live chat—we’re here to help you achieve a durable, semi-gloss finish!

Fast, Reliable & Flexible Delivery

Every order leaves our warehouse on a fully-tracked DX or FedEx service, so you can spend less time waiting and more time painting.

Delivery Options

• FREE Standard Delivery (orders £75+) – arrives in 2–3 working days
• Standard Delivery £7.95 – arrives in 2–3 working days
• Express Delivery £13.95 – next working day when you order before 12 am (Mon–Thur)
  Got a £75+ basket? Select “Express Upgrade” at checkout and only pay the difference.

Next-Day Despatch Promise

• Order before 12 am (Mon–Thurs) with express delivery → ships today & receive tomorrow.
• Order without express delivery → ships the next working day and receive the next working day after.
• Order Thursday without express delivery → ships Friday for Monday delivery.

We do not deliver on weekends & bank-holidays

What to Expect

• Upon purchasing, please provide a contact telephone number that the courier's can contact you on if they experience any issues.
• All orders usually require a signature upon delivery.
• If you are unlikely to be in during the day, consider having your order delivered to your place of work, or another business address where somebody will be able to accept and sign.

Outside UK Mainland?

Delivery prices shown cover UK Mainland addresses. If you’re ordering for the Highlands, Islands, Northern Ireland, or anywhere outside the mainland, just reach out—chat with us live, call 01482 222 421, or email info@specialistpaintsonline.co.uk—and we’ll give you a quick personalised quote.

Bottom line: order today, get it fast, track every mile, paint tomorrow.

Safety data sheet
Technical data sheet