Teamac Metalcote Machinery Enamel - Anti-Corrosive High Gloss Paint for Metal, Tractors & Machinery

• Protect metal tractors and farm machinery from rust, corrosion, UV degradation, and harsh outdoor environments

• Apply anti-corrosive high-gloss paint to metal that resists oils, fuels, fertilisers, and agricultural chemicals

• Restore and protect metal industrial equipment, construction machinery, and metal plant with durable enamel finish

• Use heat-resistant paint (up to 130°C) for metal engine components and equipment that generates heat during operation

• Achieve professional high-gloss finish on metal that resists dirt, oil, and grease for easier cleaning and maintenance

• Match popular tractor colours (Massey Ferguson Red, Ford Tractor Blue, John Deere Green, JCB Yellow) or custom RAL/BS colours

• Apply durable solvent-based alkyd enamel that provides long-lasting protection on metal in agricultural and industrial environments

• Use professional machinery enamel from Teamac (decades of British coating expertise, trusted by farmers and industrial maintenance teams)

• Apply to bare metal without priming (prime with Teamac Zinc Phosphate Primer and Metalcote Primer Undercoat first for optimal corrosion protection)

• Use on metal surfaces with active rust without treatment (treat stubborn rust with Teamac Rust Converter before priming)

• Apply to metal with oil or grease contamination (clean with Coo-Var Degreaser first for optimal adhesion)

• Use a water-based or low-VOC paint (this is solvent-based alkyd enamel with VOC ≤ 550 g/L—ensure good ventilation)

• Achieve instant full hardness (recoat after 8 hours or overnight—plan for curing time between coats)

• Use on surfaces exposed to temperatures above 130°C (heat resistance limited to 130°C—consult our experts for higher temperature applications)

• Apply in freezing conditions or high humidity (apply in temperatures between 10°C and 25°C for optimal drying and adhesion)

Teamac Metalcote Machinery Enamel is a high-gloss anti-corrosive paint designed to protect metal surfaces including tractors, farm machinery, and industrial equipment from rust, UV degradation, chemical attack, and harsh outdoor environments. Unlike standard paints that fail under agricultural and industrial conditions, this solvent-based alkyd enamel provides durable protection against corrosion, oils, chemicals, and heat up to 130°C.

Developed by Teamac with decades of British coating expertise, Metalcote Machinery Enamel is the professional solution for restoring and protecting metal agricultural and industrial equipment. The high-gloss finish not only provides excellent corrosion protection but also creates a professional appearance that resists dirt, oil, and grease, making metal surfaces easier to clean and maintain.

When metal tractors and machinery are exposed to rain, mud, fertilisers, oils, and UV radiation, standard paints quickly deteriorate, leading to rust, corrosion, and costly repairs. Teamac Metalcote's anti-corrosive formulation blocks rust at the source, whilst the UV-resistant high-gloss finish prevents fading and chalking, keeping metal equipment looking professional for years.

The chemical-resistant formulation withstands exposure to oils, fuels, fertilisers, and agricultural chemicals that would damage standard paints. The high-gloss finish is easy to clean, shedding dirt and oil for reduced maintenance. Heat resistance up to 130°C makes it suitable for metal engine components and equipment that generates heat during operation.

Suitable for metal tractors, farm machinery, industrial equipment, construction machinery, metal fabrications, beams, railings, gates, and metalwork. Apply over Teamac Metalcote Primer Undercoat for best adhesion and durability. Available in popular tractor colours (Massey Ferguson Red, Ford Tractor Blue, John Deere Green, JCB Yellow) and custom RAL/BS colours for brand matching.

Manufactured in the UK to rigorous standards and trusted by farmers, agricultural contractors, industrial maintenance teams, and machinery restoration specialists for reliable corrosion protection and professional high-gloss finishes on metal surfaces.

Key Benefits:

• Anti-Corrosive Protection for Metal – Blocks rust and corrosion on metal surfaces exposed to rain, mud, and harsh outdoor environments. Protects metal tractors and machinery from costly corrosion damage and extends equipment lifespan.

• UV Resistant High-Gloss Finish – UV-resistant formulation prevents fading and chalking on metal in outdoor conditions. High-gloss finish maintains professional appearance and resists dirt, oil, and grease for easier cleaning.

• Chemical & Oil Resistant – Withstands exposure to oils, fuels, fertilisers, and agricultural chemicals on metal surfaces. Resists chemical attack that would damage standard paints. Ideal for agricultural and industrial metal equipment.

• Heat Resistant to 130°C – Suitable for metal engine components and equipment that generates heat during operation. Maintains adhesion and appearance at elevated temperatures.

• Durable Long-Lasting Protection – Hard-wearing solvent-based alkyd enamel provides long-lasting protection on metal in demanding agricultural and industrial environments. Reduces maintenance costs and repainting frequency.

• Easy to Clean & Maintain – High-gloss finish sheds dirt, oil, and grease from metal surfaces. Easy to wipe clean, reducing maintenance time and keeping metal equipment looking professional.

• Popular Tractor Colours – Available in Massey Ferguson Red, Ford Tractor Blue, John Deere Green, Landrover Green, JCB Yellow, and other popular tractor colours. Custom RAL/BS colours available for brand matching.

• Professional Application – Apply by brush, roller, or spray (thin up to 10% with Thinners 14). Touch dry in 2 hours, recoat after 8 hours. Fast turnaround for metal machinery restoration and repair.

• Teamac Heritage – Decades of British coating expertise. Trusted by farmers, agricultural contractors, and industrial maintenance teams for reliable metal corrosion protection.

Protect metal, tractors, and machinery with professional anti-corrosive high-gloss enamel. Add to basket now and extend metal equipment lifespan.

Teamac Metalcote Machinery Enamel is the perfect choice for protecting and restoring metal tractors, farm machinery, and industrial equipment in a variety of agricultural and industrial applications:

• Metal Tractors & Farm Machinery – Ideal for metal tractors, combine harvesters, balers, ploughs, and farm equipment exposed to rain, mud, fertilisers, and harsh outdoor environments. Anti-corrosive protection blocks rust on metal. UV-resistant high-gloss finish prevents fading. Available in popular tractor colours (Massey Ferguson Red, Ford Tractor Blue, John Deere Green, John Deere Yellow, Old JCB Yellow).

• Metal Industrial Equipment & Plant – Great for metal industrial machinery, metal fabrications, conveyors, and plant equipment exposed to oils, chemicals, and demanding environments. Chemical-resistant formulation withstands oils, fuels, and industrial chemicals. High-gloss finish is easy to clean and maintain.

• Metal Construction Machinery – Perfect for metal construction equipment, diggers, excavators, and plant machinery requiring durable corrosion protection. Heat resistance up to 130°C suitable for metal engine components. Durable finish withstands heavy use and outdoor exposure.

• Metal Agricultural Vehicles – Suitable for metal agricultural trailers, spreaders, sprayers, and vehicles exposed to fertilisers, chemicals, and outdoor conditions. Chemical resistance protects against agricultural chemicals. Easy-clean high-gloss finish sheds dirt and mud.

• Metal Fabrications – A must-have for metal gates, railings, structural steelwork, and fabrications requiring long-lasting corrosion protection. Anti-corrosive formulation extends metal lifespan. Professional high-gloss finish for commercial and industrial applications.

• Metal Machinery Restoration – Ideal for restoring vintage metal tractors, classic farm machinery, and heritage equipment. Colour matching available for authentic restoration. Professional high-gloss finish recreates factory-fresh appearance on metal.

If you need further advice on using Teamac Metalcote Machinery Enamel for your project, contact our experts now via the live chat for personalised guidance!

Coverage: Approx. 12 m² per litre per coat

Per Tin Coverage (Single Coat):
• 1 litre: Covers approx. 12 m²
• 2.5 litres: Covers approx. 30 m²
• 5 litres: Covers approx. 60 m²

Recommended Application: 2 coats over Teamac Metalcote Primer Undercoat for best corrosion protection and durability

Example Calculations:

Small Tractor or Metal Machinery (10 m² surface area):
• Total area: 10 m² × 2 coats = 20 m² coverage needed
• Paint required: Approx. 1.7 litres total
• Recommended: One 2.5L tin (£51.99) will cover with material left over

Medium Tractor or Metal Equipment (25 m² surface area):
• Total area: 25 m² × 2 coats = 50 m² coverage needed
• Paint required: Approx. 4.2 litres total
• Recommended: One 5L tin (£99.45) OR Two 2.5L tins (£103.98)

Large Metal Industrial Equipment (50 m² surface area):
• Total area: 50 m² × 2 coats = 100 m² coverage needed
• Paint required: Approx. 8.4 litres total
• Recommended: Two 5L tins (£198.90) OR Four 2.5L tins (£207.96)

Coverage may vary depending on surface texture, porosity, and application method. Rough or porous metal surfaces may require more paint. For accurate project planning, we recommend ordering 10–15% extra to account for surface variation and touch-ups.

Important: For best corrosion protection and durability, apply 2 coats over Teamac Metalcote Primer Undercoat. Bare metal should be primed with Teamac Zinc Phosphate Primer first.

Recommended System Products:
• Teamac Rust Converter for treating stubborn rust on metal
• Coo-Var Degreaser for cleaning metal surfaces
• Teamac Zinc Phosphate Primer for bare metal
• Teamac Metalcote Primer Undercoat as basecoat
• Brushes, Rollers and Trays for professional application

Surface Preparation:

Bare Metal Surfaces:
• Clean metal surface with Coo-Var Degreaser to remove oil, grease, dirt, and contamination
• Remove rust with wire brush, rust remover, or treat stubborn rust with Teamac Rust Converter
• Degrease metal surface thoroughly
• Prime bare metal with Teamac Zinc Phosphate Primer and allow to dry completely
• Apply Teamac Metalcote Primer Undercoat as basecoat and allow to dry
• Metal surface must be clean, dry, and rust-free

Previously Painted Metal Surfaces:
• Ensure existing coating on metal is sound and well-adhered
• Remove any flaking or peeling paint with scraper or wire brush
• Lightly abrade metal surface to improve adhesion
• Clean thoroughly with Coo-Var Degreaser to remove oil, grease, and contamination
• For areas with rust breakthrough, treat with Teamac Rust Converter
• Apply Teamac Zinc Phosphate Primer to bare metal areas and allow to dry
• Metal surface must be clean, dry, and well-adhered

• *If changing colour we recommend applying Teamac Metalcote Primer Undercoat – Apply as basecoat Prior to Metalcote Enamel
  

Metal Tractors & Machinery:
• Clean metal equipment thoroughly with Coo-Var Degreaser to remove oil, grease, fuel, and agricultural chemicals
• Remove rust and corrosion from metal with wire brush or treat with Teamac Rust Converter
• Repair damaged metal areas with suitable metal filler and allow to cure
• Prime bare metal with Teamac Zinc Phosphate Primer
• Apply Teamac Metalcote Primer Undercoat as basecoat
• Ensure metal surface is clean, dry, and free from contamination

Application:

• Stir paint thoroughly before use and occasionally during application
• Apply in temperatures between 10°C and 25°C for optimal drying
• Ensure good ventilation during application and drying (solvent-based product)
• Use good-quality brush, roller, or spray equipment suitable for solvent-based paints

Brush Application:
• Use natural bristle or synthetic brush suitable for solvent-based paints
• Apply evenly to metal, working paint well into the surface
• Brush out to avoid runs and sags
• Coverage: Approx. 12 m² per litre per coat

Roller Application:
• Use short-pile roller suitable for solvent-based paints
• Apply evenly to metal with consistent pressure
• Avoid over-rolling which can cause bubbles
• Coverage: Approx. 12 m² per litre per coat

Spray Application:
• Thin with Thinners 14 (up to 10% by volume) for spray equipment
• Use airless sprayer or HVLP spray gun
• Apply in thin, even coats to metal
• Ensure good ventilation and wear appropriate PPE

• Apply first coat evenly over Teamac Metalcote Primer Undercoat
• Allow to dry for minimum 8 hours or overnight before applying second coat
• Apply second coat for complete corrosion protection and high-gloss finish on metal
• Allow final coat to cure fully before exposing to harsh conditions
• Avoid application in damp, humid, or freezing conditions
• Clean tools immediately after use with Thinners 14 or white spirit

Drying & Curing Times (at 20°C):

• Touch dry: 2 hours
• Hard dry: 8 hours
• Recoat time: Minimum 8 hours or overnight
• Full cure: 7 days

Drying times may be extended in cooler temperatures or high humidity.

Recommended System Products:

• Teamac Rust Converter – Treat stubborn rust on metal before priming
• Coo-Var Degreaser – Clean metal surfaces
• Teamac Zinc Phosphate Primer – Prime bare metal
• Teamac Metalcote Primer Undercoat – Apply as basecoat
• SPO Thinners- Thin prior to spray application
• Brushes, Rollers and Trays – Professional application tools

What is Teamac Metalcote Machinery Enamel and when should I use it?

Teamac Metalcote Machinery Enamel is a high-gloss anti-corrosive paint designed to protect metal surfaces including tractors, farm machinery, and industrial equipment from rust, UV degradation, chemical attack, and harsh outdoor environments. Use it for restoring and protecting metal agricultural and industrial equipment where corrosion protection, chemical resistance, and professional appearance are critical.

What are the key benefits of Metalcote Machinery Enamel?

Metalcote provides anti-corrosive protection (blocks rust on metal), UV resistance (prevents fading and chalking), chemical resistance (withstands oils, fuels, fertilisers), heat resistance (up to 130°C), and a durable high-gloss finish that resists dirt and oil for easier cleaning. Ideal for metal tractors and machinery in demanding outdoor environments.

Do I need to prime bare metal before applying Metalcote?

Yes, for bare metal surfaces, prime with Teamac Zinc Phosphate Primer first for maximum corrosion protection. Then apply Teamac Metalcote Primer Undercoat as a basecoat for optimal adhesion and durability. This system provides the best corrosion protection and ensures long-lasting results on metal.

Can I apply Metalcote over existing paint on metal?

Yes, you can apply Metalcote over existing paint on metal if the coating is sound and well-adhered. Remove any flaking or peeling paint, lightly abrade the metal surface to improve adhesion, and clean thoroughly with Coo-Var Degreaser. For areas with rust breakthrough, treat with Teamac Rust Converter and prime bare metal areas with Zinc Phosphate Primer.

What colours are available for Metalcote Machinery Enamel?

Metalcote is available in popular tractor colours including Massey Ferguson Red, Ford Tractor Blue, John Deere Green, Landrover Green, JCB Yellow, White, Black, Grey, and other standard colours. Custom RAL and BS colours are available for brand matching. Contact our experts for custom colour options.

How do I treat rust on metal before applying Metalcote?

Remove loose rust from metal with wire brush or rust remover. For stubborn rust, treat with Teamac Rust Converter which chemically converts rust to a stable surface. Clean with Coo-Var Degreaser, then prime with Teamac Zinc Phosphate Primer and apply Teamac Metalcote Primer Undercoat before topcoating with Metalcote.

How many coats of Metalcote do I need on metal?

For best corrosion protection and durability on metal, apply 2 coats over Teamac Metalcote Primer Undercoat. Allow minimum 8 hours or overnight between coats. The two-coat system provides complete coverage, maximum corrosion protection, and a professional high-gloss finish.

How long does Metalcote take to dry?

Touch dry in 2 hours, hard dry in 8 hours at 20°C. Allow minimum 8 hours or overnight before recoating. Full cure is 7 days. Drying times may be extended in cooler temperatures or high humidity.

Can I spray Metalcote Machinery Enamel?

Yes, you can spray Metalcote using airless sprayer or HVLP spray gun. Thin with Thinners 14 (up to 10% by volume) for spray application. Ensure good ventilation and wear appropriate PPE. Brush and roller application do not require thinning - apply as supplied.

Is Metalcote heat resistant?

Yes, Metalcote is heat resistant up to 130°C, making it suitable for metal engine components and equipment that generates heat during operation. The coating maintains adhesion and appearance at elevated temperatures.

How much coverage can I expect from Metalcote?

Metalcote provides approximately 12 m² per litre per coat. A 1L tin covers 12 m², and a 2.5L tin covers 30 m². Coverage may vary depending on metal surface texture and application method. We recommend ordering 10–15% extra for surface variation and touch-ups.

Is Metalcote chemical resistant?

Yes, Metalcote is chemical resistant and withstands exposure to oils, fuels, fertilisers, and agricultural chemicals on metal surfaces. The formulation resists chemical attack that would damage standard paints, making it ideal for agricultural and industrial metal equipment.

Is Metalcote suitable for outdoor use on metal?

Yes, Metalcote is designed for interior and exterior use on metal tractors, farm machinery, and industrial equipment. The UV-resistant formulation prevents fading and chalking on metal in outdoor conditions, whilst the anti-corrosive properties protect against rain, mud, and harsh environments.

What products do I need to complete my metal machinery restoration?

We recommend using Teamac Rust Converter for treating stubborn rust on metal, Coo-Var Degreaser for cleaning metal surfaces, Teamac Zinc Phosphate Primer for bare metal, Teamac Metalcote Primer Undercoat as basecoat, and professional Brushes, Rollers and Trays for application. This complete system ensures maximum corrosion protection and professional results on metal.

Safety data sheet - white
Safety data sheet - black
Safety data sheet - lead chrome free colours
Safety data sheet - reds and maroons
Safety data sheet - deutz silver
Safety data sheet - TAL/TBL/TDL bases for tinting
Safety data sheet - TYEL/TRED bases for tinting
Technical data sheet

Complete Your Machinery Protection System:

• Teamac Rust Converter – Treat any stubborn rust before priming for optimal corrosion protection

• Coo-Var Degreaser – Clean metal surfaces to remove oil, grease, and contamination before application

• Teamac Zinc Phosphate Primer – Prime bare metal for maximum corrosion protection and adhesion

• Teamac Metalcote Primer Undercoat – Apply over zinc phosphate prime as a basecoat for optimal adhesion and durability

• Brushes, Rollers and Trays – Professional application tools for high-gloss enamel finishes

• SPO Thinners – Thin prior to Spray Application

• Coo-Var Aluminium Wood Primer – Prime wood surfaces before application for optimal adhesion and protection

Need help choosing the right products? Contact our experts via live chat for personalised advice!

Fast, Reliable & Fully Tracked UK Delivery

Every order is dispatched from our warehouse using a fully tracked DX or FedEx service, so you always know when your paint will arrive.

Delivery Options

• FREE Standard Delivery (orders over £75) Arrives in 2–3 working days
• Standard Delivery – £7.95 Arrives in 2–3 working days
• Express Delivery – £13.95 Next working day delivery when you order before 12:00 noon (Mon–Thu)
• Spending £75+? Select Express Upgrade at checkout and only pay the difference

Dispatch & Delivery Times (What Happens After You Order)

• Express delivery (order before 12:00 Mon–Thu) Dispatched same day, delivered next working day
• Standard delivery (Mon–Wed orders) Dispatched next working day, delivered 2–3 working days later
• Orders placed Thursday (standard delivery) Dispatched Friday for Monday delivery
• We do not dispatch or deliver on weekends or UK bank holidays

What to Expect on Delivery

Please provide a contact telephone number at checkout. This allows the courier to share tracking updates or contact you if there are any delivery issues.

Most orders require a signature on delivery. If you may not be available during the day, we recommend delivery to a workplace, business address, or another location where someone can sign.

Outside the UK Mainland?

Delivery prices shown apply to UK Mainland only.

For the Highlands, Islands, Northern Ireland, or non-mainland addresses, please contact us for a quick personalised quote via live chat, by calling 01482 222 421, or emailing info@specialistpaintsonline.co.uk.

Bottom Line

Order today, get fast and reliable delivery, track every step, and get painting without delays.